From: Biju Das <biju.das.jz@bp.renesas.com> To: Kishon Vijay Abraham I <kishon@ti.com>, Rob Herring <robh+dt@kernel.org> Cc: Biju Das <biju.das.jz@bp.renesas.com>, Vinod Koul <vkoul@kernel.org>, Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>, linux-phy@lists.infradead.org, devicetree@vger.kernel.org, Geert Uytterhoeven <geert+renesas@glider.be>, Chris Paterson <Chris.Paterson2@renesas.com>, Biju Das <biju.das@bp.renesas.com>, Prabhakar Mahadev Lad <prabhakar.mahadev-lad.rj@bp.renesas.com>, linux-renesas-soc@vger.kernel.org Subject: [PATCH 0/6] Add RZ/G2L USB2.0 phy and host support Date: Fri, 11 Jun 2021 14:46:36 +0100 [thread overview] Message-ID: <20210611134642.24029-1-biju.das.jz@bp.renesas.com> (raw) This patch series adds USB2.0 phy and Host support for RZ/G2L SoC. A new driver introduced for RZ/G2L USB phy control block, which mainly controls reset and power down of the USB2.0/PHY. This patchset is based on master branch [1] [1] https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers.git/ Biju Das (6): dt-bindings: phy: renesas: Document RZ/G2L USB PHY Control bindings drivers: clk: renesas: r9a07g044-cpg: Add USB clocks phy: renesas: Add RZ/G2L usb phy control driver arm64: configs: defconfig: Enable RZ/G2L USB PHY control driver dt-bindings: phy: renesas,usb2-phy: Document RZ/G2L phy bindings arm64: dts: renesas: r9a07g044: Add USB2.0 phy and host support .../phy/renesas,rzg2l-usbphyctrl.yaml | 50 ++++++ .../bindings/phy/renesas,usb2-phy.yaml | 1 + arch/arm64/boot/dts/renesas/r9a07g044.dtsi | 81 +++++++++ arch/arm64/configs/defconfig | 1 + drivers/clk/renesas/r9a07g044-cpg.c | 6 + drivers/phy/renesas/Kconfig | 7 + drivers/phy/renesas/Makefile | 1 + drivers/phy/renesas/phy-rzg2l-usbphyctrl.c | 163 ++++++++++++++++++ 8 files changed, 310 insertions(+) create mode 100644 Documentation/devicetree/bindings/phy/renesas,rzg2l-usbphyctrl.yaml create mode 100644 drivers/phy/renesas/phy-rzg2l-usbphyctrl.c -- 2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: Biju Das <biju.das.jz@bp.renesas.com> To: Kishon Vijay Abraham I <kishon@ti.com>, Rob Herring <robh+dt@kernel.org> Cc: Biju Das <biju.das.jz@bp.renesas.com>, Vinod Koul <vkoul@kernel.org>, Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>, linux-phy@lists.infradead.org, devicetree@vger.kernel.org, Geert Uytterhoeven <geert+renesas@glider.be>, Chris Paterson <Chris.Paterson2@renesas.com>, Biju Das <biju.das@bp.renesas.com>, Prabhakar Mahadev Lad <prabhakar.mahadev-lad.rj@bp.renesas.com>, linux-renesas-soc@vger.kernel.org Subject: [PATCH 0/6] Add RZ/G2L USB2.0 phy and host support Date: Fri, 11 Jun 2021 14:46:36 +0100 [thread overview] Message-ID: <20210611134642.24029-1-biju.das.jz@bp.renesas.com> (raw) This patch series adds USB2.0 phy and Host support for RZ/G2L SoC. A new driver introduced for RZ/G2L USB phy control block, which mainly controls reset and power down of the USB2.0/PHY. This patchset is based on master branch [1] [1] https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers.git/ Biju Das (6): dt-bindings: phy: renesas: Document RZ/G2L USB PHY Control bindings drivers: clk: renesas: r9a07g044-cpg: Add USB clocks phy: renesas: Add RZ/G2L usb phy control driver arm64: configs: defconfig: Enable RZ/G2L USB PHY control driver dt-bindings: phy: renesas,usb2-phy: Document RZ/G2L phy bindings arm64: dts: renesas: r9a07g044: Add USB2.0 phy and host support .../phy/renesas,rzg2l-usbphyctrl.yaml | 50 ++++++ .../bindings/phy/renesas,usb2-phy.yaml | 1 + arch/arm64/boot/dts/renesas/r9a07g044.dtsi | 81 +++++++++ arch/arm64/configs/defconfig | 1 + drivers/clk/renesas/r9a07g044-cpg.c | 6 + drivers/phy/renesas/Kconfig | 7 + drivers/phy/renesas/Makefile | 1 + drivers/phy/renesas/phy-rzg2l-usbphyctrl.c | 163 ++++++++++++++++++ 8 files changed, 310 insertions(+) create mode 100644 Documentation/devicetree/bindings/phy/renesas,rzg2l-usbphyctrl.yaml create mode 100644 drivers/phy/renesas/phy-rzg2l-usbphyctrl.c -- 2.17.1 -- linux-phy mailing list linux-phy@lists.infradead.org https://lists.infradead.org/mailman/listinfo/linux-phy
next reply other threads:[~2021-06-11 13:46 UTC|newest] Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-06-11 13:46 Biju Das [this message] 2021-06-11 13:46 ` [PATCH 0/6] Add RZ/G2L USB2.0 phy and host support Biju Das 2021-06-11 13:46 ` [PATCH 1/6] dt-bindings: phy: renesas: Document RZ/G2L USB PHY Control bindings Biju Das 2021-06-11 13:46 ` Biju Das 2021-06-21 4:01 ` Vinod Koul 2021-06-21 4:01 ` Vinod Koul 2021-06-21 6:40 ` Biju Das 2021-06-21 6:40 ` Biju Das 2021-06-11 13:46 ` [PATCH 2/6] drivers: clk: renesas: r9a07g044-cpg: Add USB clocks Biju Das 2021-06-14 12:26 ` Geert Uytterhoeven 2021-06-15 8:58 ` Geert Uytterhoeven 2021-06-15 9:48 ` Laurent Pinchart 2021-06-15 9:53 ` Geert Uytterhoeven 2021-06-15 9:57 ` Laurent Pinchart 2021-06-15 10:24 ` Geert Uytterhoeven 2021-06-16 10:16 ` Biju Das 2021-06-16 11:33 ` Laurent Pinchart 2021-06-16 10:12 ` Biju Das 2021-06-11 13:46 ` [PATCH 3/6] phy: renesas: Add RZ/G2L usb phy control driver Biju Das 2021-06-11 13:46 ` Biju Das 2021-06-21 4:13 ` Vinod Koul 2021-06-21 4:13 ` Vinod Koul 2021-06-21 6:51 ` Biju Das 2021-06-21 6:51 ` Biju Das 2021-06-11 13:46 ` [PATCH 4/6] arm64: configs: defconfig: Enable RZ/G2L USB PHY " Biju Das 2021-06-11 13:46 ` Biju Das 2021-06-11 13:46 ` [PATCH 5/6] dt-bindings: phy: renesas,usb2-phy: Document RZ/G2L phy bindings Biju Das 2021-06-11 13:46 ` [PATCH 5/6] dt-bindings: phy: renesas, usb2-phy: " Biju Das 2021-06-11 13:46 ` [PATCH 6/6] arm64: dts: renesas: r9a07g044: Add USB2.0 phy and host support Biju Das
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20210611134642.24029-1-biju.das.jz@bp.renesas.com \ --to=biju.das.jz@bp.renesas.com \ --cc=Chris.Paterson2@renesas.com \ --cc=biju.das@bp.renesas.com \ --cc=devicetree@vger.kernel.org \ --cc=geert+renesas@glider.be \ --cc=kishon@ti.com \ --cc=linux-phy@lists.infradead.org \ --cc=linux-renesas-soc@vger.kernel.org \ --cc=prabhakar.mahadev-lad.rj@bp.renesas.com \ --cc=robh+dt@kernel.org \ --cc=vkoul@kernel.org \ --cc=yoshihiro.shimoda.uh@renesas.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.