From: Shawn Guo <shawnguo@kernel.org> To: soc@kernel.org, arm@kernel.org Cc: Shawn Guo <shawnguo@kernel.org>, Fabio Estevam <festevam@gmail.com>, Stefan Agner <stefan@agner.ch>, Li Yang <leoyang.li@nxp.com>, kernel@pengutronix.de, linux-imx@nxp.com, linux-arm-kernel@lists.infradead.org Subject: [GIT PULL 5/6] i.MX arm64 device tree changes for 5.14 Date: Sun, 13 Jun 2021 16:25:43 +0800 [thread overview] Message-ID: <20210613082544.16067-5-shawnguo@kernel.org> (raw) In-Reply-To: <20210613082544.16067-1-shawnguo@kernel.org> The following changes since commit 6efb943b8616ec53a5e444193dccf1af9ad627b5: Linux 5.13-rc1 (2021-05-09 14:17:44 -0700) are available in the Git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-dt64-5.14 for you to fetch changes up to 21cc1f222e890fa989d1395e47b16777fea46e5f: arm64: dts: imx8mn-evk: disable over current for usb (2021-06-12 17:59:43 +0800) ---------------------------------------------------------------- i.MX arm64 device tree chagnes for 5.14: - New board support: i.MX8MM Gateworks GW7901 board. - Add SPBA bus description for i.MX8MN and i.MX8MM. - A series of update on imx8mq-nitrogen board to add USB OTG/Host and LT8912 MIPI-DSI to HDMI support. - Correct enet clock description for i.MX8 Connection Subsystem. - A couple of patches from Heiko Schocher to add FlexSPI device for i.MX8MP SoC and enable SPI NOR Flash support on imx8mp-phycore-som. - Remove the reference to audio IPG clock on i.MX8MP. - Enable EQOS Ethernet and PMIC device support for imx8mp-evk. - Disable USB over-current on imx8mm-evk and imx8mn-evk. - Add dma-ranges description for i.MX8MM and i.MX8MN SoC. - Add PCIe clock description for i.MX8MQ SoC. - Enable PCIe support on freeway board. - Enable OPTEE support on ls1028a-rdb board. ---------------------------------------------------------------- Adam Ford (3): arm64: dts: imx8mn: Add spba1 bus arm64: dts: imx8mm: Add spba1 and spba2 buses arm64: dts: imx8mn-beacon-som: Assign PMIC clock Adrien Grassein (3): arm64: dts: imx8mq-nitrogen: add USB OTG support arm64: dts: imx8mq-nitrogen: add USB HOST support arm64: dts: imx8mq-nitrogen: add lt8912 MIPI-DSI to HDMI Dong Aisheng (1): arm64: dts: imx8: conn: fix enet clock setting Heiko Schocher (2): arm64: dts: imx8mp: add flexspi node arm64: dts: imx8mp-phycore-som: enable spi nor Jacky Bai (1): arm64: dts: imx8mp: Remove the reference to audio ipg clock on imx8mp Joakim Zhang (1): arm64: dts: imx8mp-evk: enable EQOS ethernet Kornel Duleba (1): arm64: dts: fsl-ls1028a: Correct ECAM PCIE window ranges Li Jun (2): arm64: dts: imx8mm-evk: disable over current for usb1 arm64: dts: imx8mn-evk: disable over current for usb Lucas Stach (3): arm64: dts: imx8mm: specify dma-ranges arm64: dts: imx8mn: specify dma-ranges arm64: dts: imx8mq: assign PCIe clocks Mian Yousaf Kaukab (2): arm64: dts: ls1012a: enable PCIe on freeway board arm64: dts: ls208xa: remove bus-num from dspi node Richard Zhu (1): arm64: dts: imx8mq-evk: add one regulator used to power up pcie phy Sahil Malhotra (1): arm64: dts: ls1028a-rdb: enable optee node Tim Harvey (1): arm64: dts: imx: Add i.mx8mm Gateworks gw7901 dts support Uwe Kleine-König (1): arm64: dts: imx8mp-evk: Add PMIC device Zhen Lei (1): arm64: dts: freescale: Separate each group of data in the property 'reg' arch/arm64/boot/dts/freescale/Makefile | 1 + arch/arm64/boot/dts/freescale/fsl-ls1012a-frwy.dts | 4 + arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi | 14 +- arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts | 4 + arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 24 +- arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 12 +- arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 24 +- arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 24 +- arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi | 16 +- arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi | 16 +- arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi | 1 - arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 24 +- arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi | 50 +- arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi | 1 + .../boot/dts/freescale/imx8mm-venice-gw7901.dts | 1019 ++++++++++++++++++++ arch/arm64/boot/dts/freescale/imx8mm.dtsi | 363 +++---- .../boot/dts/freescale/imx8mn-beacon-som.dtsi | 3 + arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi | 1 + arch/arm64/boot/dts/freescale/imx8mn.dtsi | 147 +-- arch/arm64/boot/dts/freescale/imx8mp-evk.dts | 139 +++ .../boot/dts/freescale/imx8mp-phycore-som.dtsi | 25 + arch/arm64/boot/dts/freescale/imx8mp.dtsi | 18 +- arch/arm64/boot/dts/freescale/imx8mq-evk.dts | 1 + arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts | 182 ++++ arch/arm64/boot/dts/freescale/imx8mq.dtsi | 16 + 25 files changed, 1789 insertions(+), 340 deletions(-) create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts
WARNING: multiple messages have this Message-ID (diff)
From: Shawn Guo <shawnguo@kernel.org> To: soc@kernel.org, arm@kernel.org Cc: Shawn Guo <shawnguo@kernel.org>, Fabio Estevam <festevam@gmail.com>, Stefan Agner <stefan@agner.ch>, Li Yang <leoyang.li@nxp.com>, kernel@pengutronix.de, linux-imx@nxp.com, linux-arm-kernel@lists.infradead.org Subject: [GIT PULL 5/6] i.MX arm64 device tree changes for 5.14 Date: Sun, 13 Jun 2021 16:25:43 +0800 [thread overview] Message-ID: <20210613082544.16067-5-shawnguo@kernel.org> (raw) Message-ID: <20210613082543.i7M1yCNzK11LdAlFvpxqWkahRX4rsd-2junhRfKPrQI@z> (raw) In-Reply-To: <20210613082544.16067-1-shawnguo@kernel.org> The following changes since commit 6efb943b8616ec53a5e444193dccf1af9ad627b5: Linux 5.13-rc1 (2021-05-09 14:17:44 -0700) are available in the Git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-dt64-5.14 for you to fetch changes up to 21cc1f222e890fa989d1395e47b16777fea46e5f: arm64: dts: imx8mn-evk: disable over current for usb (2021-06-12 17:59:43 +0800) ---------------------------------------------------------------- i.MX arm64 device tree chagnes for 5.14: - New board support: i.MX8MM Gateworks GW7901 board. - Add SPBA bus description for i.MX8MN and i.MX8MM. - A series of update on imx8mq-nitrogen board to add USB OTG/Host and LT8912 MIPI-DSI to HDMI support. - Correct enet clock description for i.MX8 Connection Subsystem. - A couple of patches from Heiko Schocher to add FlexSPI device for i.MX8MP SoC and enable SPI NOR Flash support on imx8mp-phycore-som. - Remove the reference to audio IPG clock on i.MX8MP. - Enable EQOS Ethernet and PMIC device support for imx8mp-evk. - Disable USB over-current on imx8mm-evk and imx8mn-evk. - Add dma-ranges description for i.MX8MM and i.MX8MN SoC. - Add PCIe clock description for i.MX8MQ SoC. - Enable PCIe support on freeway board. - Enable OPTEE support on ls1028a-rdb board. ---------------------------------------------------------------- Adam Ford (3): arm64: dts: imx8mn: Add spba1 bus arm64: dts: imx8mm: Add spba1 and spba2 buses arm64: dts: imx8mn-beacon-som: Assign PMIC clock Adrien Grassein (3): arm64: dts: imx8mq-nitrogen: add USB OTG support arm64: dts: imx8mq-nitrogen: add USB HOST support arm64: dts: imx8mq-nitrogen: add lt8912 MIPI-DSI to HDMI Dong Aisheng (1): arm64: dts: imx8: conn: fix enet clock setting Heiko Schocher (2): arm64: dts: imx8mp: add flexspi node arm64: dts: imx8mp-phycore-som: enable spi nor Jacky Bai (1): arm64: dts: imx8mp: Remove the reference to audio ipg clock on imx8mp Joakim Zhang (1): arm64: dts: imx8mp-evk: enable EQOS ethernet Kornel Duleba (1): arm64: dts: fsl-ls1028a: Correct ECAM PCIE window ranges Li Jun (2): arm64: dts: imx8mm-evk: disable over current for usb1 arm64: dts: imx8mn-evk: disable over current for usb Lucas Stach (3): arm64: dts: imx8mm: specify dma-ranges arm64: dts: imx8mn: specify dma-ranges arm64: dts: imx8mq: assign PCIe clocks Mian Yousaf Kaukab (2): arm64: dts: ls1012a: enable PCIe on freeway board arm64: dts: ls208xa: remove bus-num from dspi node Richard Zhu (1): arm64: dts: imx8mq-evk: add one regulator used to power up pcie phy Sahil Malhotra (1): arm64: dts: ls1028a-rdb: enable optee node Tim Harvey (1): arm64: dts: imx: Add i.mx8mm Gateworks gw7901 dts support Uwe Kleine-König (1): arm64: dts: imx8mp-evk: Add PMIC device Zhen Lei (1): arm64: dts: freescale: Separate each group of data in the property 'reg' arch/arm64/boot/dts/freescale/Makefile | 1 + arch/arm64/boot/dts/freescale/fsl-ls1012a-frwy.dts | 4 + arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi | 14 +- arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts | 4 + arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 24 +- arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 12 +- arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 24 +- arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 24 +- arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi | 16 +- arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi | 16 +- arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi | 1 - arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 24 +- arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi | 50 +- arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi | 1 + .../boot/dts/freescale/imx8mm-venice-gw7901.dts | 1019 ++++++++++++++++++++ arch/arm64/boot/dts/freescale/imx8mm.dtsi | 363 +++---- .../boot/dts/freescale/imx8mn-beacon-som.dtsi | 3 + arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi | 1 + arch/arm64/boot/dts/freescale/imx8mn.dtsi | 147 +-- arch/arm64/boot/dts/freescale/imx8mp-evk.dts | 139 +++ .../boot/dts/freescale/imx8mp-phycore-som.dtsi | 25 + arch/arm64/boot/dts/freescale/imx8mp.dtsi | 18 +- arch/arm64/boot/dts/freescale/imx8mq-evk.dts | 1 + arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts | 182 ++++ arch/arm64/boot/dts/freescale/imx8mq.dtsi | 16 + 25 files changed, 1789 insertions(+), 340 deletions(-) create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2021-06-13 8:26 UTC|newest] Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-06-13 8:25 [GIT PULL 1/6] i.MX drivers update for 5.14 Shawn Guo 2021-06-13 8:25 ` Shawn Guo 2021-06-13 8:25 ` [GIT PULL 2/6] i.MX SoC changes " Shawn Guo 2021-06-13 8:25 ` Shawn Guo 2021-06-13 8:25 ` [GIT PULL 3/6] i.MX dt-bindings update " Shawn Guo 2021-06-13 8:25 ` Shawn Guo 2021-06-13 8:25 ` [GIT PULL 4/6] i.MX device tree changes " Shawn Guo 2021-06-13 8:25 ` Shawn Guo 2021-06-13 8:25 ` Shawn Guo [this message] 2021-06-13 8:25 ` [GIT PULL 5/6] i.MX arm64 " Shawn Guo 2021-06-13 8:25 ` [GIT PULL 6/6] i.MX defconfig update " Shawn Guo 2021-06-13 8:25 ` Shawn Guo 2021-06-15 16:00 ` [GIT PULL 1/6] i.MX drivers " patchwork-bot+linux-soc
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20210613082544.16067-5-shawnguo@kernel.org \ --to=shawnguo@kernel.org \ --cc=arm@kernel.org \ --cc=festevam@gmail.com \ --cc=kernel@pengutronix.de \ --cc=leoyang.li@nxp.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-imx@nxp.com \ --cc=soc@kernel.org \ --cc=stefan@agner.ch \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.