[PATCH v1 2/2] usb: phy: tegra: Correct definition of B_SESS_VLD_WAKEUP_EN bit

[Dmitry Osipenko <digetx@gmail.com>]

The B_SESS_VLD_WAKEUP_EN bit 6 was added by a mistake in a previous
commit. This bit corresponds to B_SESS_END_WAKEUP_EN, which we don't use.
The B_VBUS_VLD_WAKEUP_EN doesn't exist at all and B_SESS_VLD_WAKEUP_EN
needs to be in place of it. We don't utilize B-sensors in the driver,
so it never was a problem, nevertheless let's correct the definition of
the bits.

Fixes: 35192007d28d ("usb: phy: tegra: Support waking up from a low power mode")
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
---
 drivers/usb/phy/phy-tegra-usb.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/usb/phy/phy-tegra-usb.c b/drivers/usb/phy/phy-tegra-usb.c
index ff482c694200..cd425b937750 100644
--- a/drivers/usb/phy/phy-tegra-usb.c
+++ b/drivers/usb/phy/phy-tegra-usb.c
@@ -58,8 +58,7 @@
 #define   USB_WAKEUP_DEBOUNCE_COUNT(x)		(((x) & 0x7) << 16)
 
 #define USB_PHY_VBUS_SENSORS			0x404
-#define   B_SESS_VLD_WAKEUP_EN			BIT(6)
-#define   B_VBUS_VLD_WAKEUP_EN			BIT(14)
+#define   B_SESS_VLD_WAKEUP_EN			BIT(14)
 #define   A_SESS_VLD_WAKEUP_EN			BIT(22)
 #define   A_VBUS_VLD_WAKEUP_EN			BIT(30)
 
@@ -548,7 +547,7 @@ static int utmi_phy_power_on(struct tegra_usb_phy *phy)
 
 		val = readl_relaxed(base + USB_PHY_VBUS_SENSORS);
 		val &= ~(A_VBUS_VLD_WAKEUP_EN | A_SESS_VLD_WAKEUP_EN);
-		val &= ~(B_VBUS_VLD_WAKEUP_EN | B_SESS_VLD_WAKEUP_EN);
+		val &= ~(B_SESS_VLD_WAKEUP_EN);
 		writel_relaxed(val, base + USB_PHY_VBUS_SENSORS);
 
 		val = readl_relaxed(base + UTMIP_BAT_CHRG_CFG0);
-- 
2.30.2