From: Peter Robinson <pbrobinson@gmail.com> To: Heiko Stuebner <heiko@sntech.de>, linux-arm-kernel@lists.infradead.org, linux-rockchip@lists.infradead.org Cc: Peter Robinson <pbrobinson@gmail.com> Subject: [PATCH 4/4] arm64: dts: rockchip: Add USB-C port details for rk3399 Firefly Date: Sun, 13 Jun 2021 22:52:37 +0100 [thread overview] Message-ID: <20210613215237.830160-4-pbrobinson@gmail.com> (raw) In-Reply-To: <20210613215237.830160-1-pbrobinson@gmail.com> Add the initial details for the USB-C port. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> --- .../boot/dts/rockchip/rk3399-firefly.dts | 85 +++++++++++++++++++ 1 file changed, 85 insertions(+) diff --git a/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts b/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts index e56d47040868..4a427beab1c7 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts @@ -6,6 +6,7 @@ /dts-v1/; #include <dt-bindings/input/linux-event-codes.h> #include <dt-bindings/pwm/pwm.h> +#include <dt-bindings/usb/pd.h> #include "rk3399.dtsi" #include "rk3399-opp.dtsi" @@ -220,6 +221,17 @@ vcc5v0_host: vcc5v0-host-regulator { vin-supply = <&vcc_sys>; }; + vcc5v0_typec: vcc5v0-typec-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_typec_en>; + regulator-name = "vcc5v0_typec"; + regulator-always-on; + vin-supply = <&vcc_sys>; + }; + vcc_sys: vcc-sys { compatible = "regulator-fixed"; regulator-name = "vcc_sys"; @@ -551,6 +563,53 @@ accelerometer@68 { interrupt-parent = <&gpio1>; interrupts = <RK_PC6 IRQ_TYPE_EDGE_RISING>; }; + + fusb0: typec-portc@22 { + compatible = "fcs,fusb302"; + reg = <0x22>; + interrupt-parent = <&gpio1>; + interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&fusb0_int>; + vbus-supply = <&vcc5v0_typec>; + status = "okay"; + + connector { + compatible = "usb-c-connector"; + data-role = "host"; + label = "USB-C"; + op-sink-microwatt = <1000000>; + power-role = "dual"; + sink-pdos = + <PDO_FIXED(5000, 2500, PDO_FIXED_USB_COMM)>; + source-pdos = + <PDO_FIXED(5000, 1400, PDO_FIXED_USB_COMM)>; + try-power-role = "sink"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usbc_hs: endpoint { + remote-endpoint = + <&u2phy0_typec_hs>; + }; + }; + + port@1 { + reg = <1>; + + usbc_ss: endpoint { + remote-endpoint = + <&tcphy0_typec_ss>; + }; + }; + }; + }; + }; }; &i2s0 { @@ -602,6 +661,12 @@ pwrbtn: pwrbtn { }; }; + fusb302x { + fusb0_int: fusb0-int { + rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + ir { ir_int: ir-int { rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; @@ -660,6 +725,12 @@ wifi_enable_h: wifi-enable-h { }; }; + usb-typec { + vcc5v0_typec_en: vcc5v0_typec_en { + rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + usb2 { vcc5v0_host_en: vcc5v0-host-en { rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>; @@ -753,6 +824,14 @@ &tcphy0 { status = "okay"; }; +&tcphy0_usb3 { + port { + tcphy0_typec_ss: endpoint { + remote-endpoint = <&usbc_ss>; + }; + }; +}; + &tcphy1 { status = "okay"; }; @@ -776,6 +855,12 @@ u2phy0_host: host-port { phy-supply = <&vcc5v0_host>; status = "okay"; }; + + port { + u2phy0_typec_hs: endpoint { + remote-endpoint = <&usbc_hs>; + }; + }; }; &u2phy1 { -- 2.31.1 _______________________________________________ Linux-rockchip mailing list Linux-rockchip@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-rockchip
WARNING: multiple messages have this Message-ID (diff)
From: Peter Robinson <pbrobinson@gmail.com> To: Heiko Stuebner <heiko@sntech.de>, linux-arm-kernel@lists.infradead.org, linux-rockchip@lists.infradead.org Cc: Peter Robinson <pbrobinson@gmail.com> Subject: [PATCH 4/4] arm64: dts: rockchip: Add USB-C port details for rk3399 Firefly Date: Sun, 13 Jun 2021 22:52:37 +0100 [thread overview] Message-ID: <20210613215237.830160-4-pbrobinson@gmail.com> (raw) In-Reply-To: <20210613215237.830160-1-pbrobinson@gmail.com> Add the initial details for the USB-C port. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> --- .../boot/dts/rockchip/rk3399-firefly.dts | 85 +++++++++++++++++++ 1 file changed, 85 insertions(+) diff --git a/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts b/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts index e56d47040868..4a427beab1c7 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts @@ -6,6 +6,7 @@ /dts-v1/; #include <dt-bindings/input/linux-event-codes.h> #include <dt-bindings/pwm/pwm.h> +#include <dt-bindings/usb/pd.h> #include "rk3399.dtsi" #include "rk3399-opp.dtsi" @@ -220,6 +221,17 @@ vcc5v0_host: vcc5v0-host-regulator { vin-supply = <&vcc_sys>; }; + vcc5v0_typec: vcc5v0-typec-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_typec_en>; + regulator-name = "vcc5v0_typec"; + regulator-always-on; + vin-supply = <&vcc_sys>; + }; + vcc_sys: vcc-sys { compatible = "regulator-fixed"; regulator-name = "vcc_sys"; @@ -551,6 +563,53 @@ accelerometer@68 { interrupt-parent = <&gpio1>; interrupts = <RK_PC6 IRQ_TYPE_EDGE_RISING>; }; + + fusb0: typec-portc@22 { + compatible = "fcs,fusb302"; + reg = <0x22>; + interrupt-parent = <&gpio1>; + interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&fusb0_int>; + vbus-supply = <&vcc5v0_typec>; + status = "okay"; + + connector { + compatible = "usb-c-connector"; + data-role = "host"; + label = "USB-C"; + op-sink-microwatt = <1000000>; + power-role = "dual"; + sink-pdos = + <PDO_FIXED(5000, 2500, PDO_FIXED_USB_COMM)>; + source-pdos = + <PDO_FIXED(5000, 1400, PDO_FIXED_USB_COMM)>; + try-power-role = "sink"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usbc_hs: endpoint { + remote-endpoint = + <&u2phy0_typec_hs>; + }; + }; + + port@1 { + reg = <1>; + + usbc_ss: endpoint { + remote-endpoint = + <&tcphy0_typec_ss>; + }; + }; + }; + }; + }; }; &i2s0 { @@ -602,6 +661,12 @@ pwrbtn: pwrbtn { }; }; + fusb302x { + fusb0_int: fusb0-int { + rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + ir { ir_int: ir-int { rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; @@ -660,6 +725,12 @@ wifi_enable_h: wifi-enable-h { }; }; + usb-typec { + vcc5v0_typec_en: vcc5v0_typec_en { + rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + usb2 { vcc5v0_host_en: vcc5v0-host-en { rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>; @@ -753,6 +824,14 @@ &tcphy0 { status = "okay"; }; +&tcphy0_usb3 { + port { + tcphy0_typec_ss: endpoint { + remote-endpoint = <&usbc_ss>; + }; + }; +}; + &tcphy1 { status = "okay"; }; @@ -776,6 +855,12 @@ u2phy0_host: host-port { phy-supply = <&vcc5v0_host>; status = "okay"; }; + + port { + u2phy0_typec_hs: endpoint { + remote-endpoint = <&usbc_hs>; + }; + }; }; &u2phy1 { -- 2.31.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2021-06-13 21:54 UTC|newest] Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-06-13 21:52 [PATCH 1/4] arm64: dts: rockchip: add SPDIF node for rk3399-firefly Peter Robinson 2021-06-13 21:52 ` Peter Robinson 2021-06-13 21:52 ` [PATCH 2/4] arm64: dts: rockchip: add infrared receiver node to RK3399 Firefly Peter Robinson 2021-06-13 21:52 ` Peter Robinson 2021-06-13 21:52 ` [PATCH 3/4] arm64: dts: rockchip: Sort rk3399 firefly pinmux entries Peter Robinson 2021-06-13 21:52 ` Peter Robinson 2021-06-13 21:52 ` Peter Robinson [this message] 2021-06-13 21:52 ` [PATCH 4/4] arm64: dts: rockchip: Add USB-C port details for rk3399 Firefly Peter Robinson 2021-06-19 21:58 ` [PATCH 1/4] arm64: dts: rockchip: add SPDIF node for rk3399-firefly Heiko Stuebner 2021-06-19 21:58 ` Heiko Stuebner
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20210613215237.830160-4-pbrobinson@gmail.com \ --to=pbrobinson@gmail.com \ --cc=heiko@sntech.de \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-rockchip@lists.infradead.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.