From: Martin Kepplinger <martin.kepplinger@puri.sm> To: martin.kepplinger@puri.sm, laurent.pinchart@ideasonboard.com Cc: devicetree@vger.kernel.org, festevam@gmail.com, kernel@pengutronix.de, kernel@puri.sm, krzk@kernel.org, linux-arm-kernel@lists.infradead.org, linux-imx@nxp.com, linux-kernel@vger.kernel.org, linux-media@vger.kernel.org, linux-staging@lists.linux.dev, mchehab@kernel.org, phone-devel@vger.kernel.org, robh@kernel.org, shawnguo@kernel.org, slongerbeam@gmail.com, m.felsch@pengutronix.de Subject: [PATCH v4 3/3] arm64: dts: imx8mq: add mipi csi phy and csi bridge descriptions Date: Mon, 14 Jun 2021 14:15:22 +0200 [thread overview] Message-ID: <20210614121522.2944593-4-martin.kepplinger@puri.sm> (raw) In-Reply-To: <20210614121522.2944593-1-martin.kepplinger@puri.sm> Describe the 2 available CSI interfaces on the i.MX8MQ with the MIPI-CSI2 receiver and the CSI Bridge that provides the user buffers, where the existing driver can directly be used. An image sensor is to be connected to the MIPIs' second port, described in board files. Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm> --- arch/arm64/boot/dts/freescale/imx8mq.dtsi | 102 ++++++++++++++++++++++ 1 file changed, 102 insertions(+) diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi index 91df9c5350ae..480eaf1dec2b 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi @@ -1099,6 +1099,108 @@ uart4: serial@30a60000 { status = "disabled"; }; + mipi_csi1: csi@30a70000 { + compatible = "fsl,imx8mq-mipi-csi2"; + reg = <0x30a70000 0x1000>; + clocks = <&clk IMX8MQ_CLK_CSI1_CORE>, + <&clk IMX8MQ_CLK_CSI1_ESC>, + <&clk IMX8MQ_CLK_CSI1_PHY_REF>, + <&clk IMX8MQ_CLK_CLKO2>; + clock-names = "core", "esc", "pxl", "clko2"; + assigned-clocks = <&clk IMX8MQ_CLK_CSI1_CORE>, + <&clk IMX8MQ_CLK_CSI1_PHY_REF>, + <&clk IMX8MQ_CLK_CSI1_ESC>; + assigned-clock-rates = <266000000>, <333000000>, <66000000>; + assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_266M>, + <&clk IMX8MQ_SYS2_PLL_1000M>, + <&clk IMX8MQ_SYS1_PLL_800M>; + power-domains = <&pgc_mipi_csi1>; + resets = <&src>; + fsl,mipi-phy-gpr = <&iomuxc_gpr 0x88>; + interconnects = <&noc IMX8MQ_ICM_CSI1 &noc IMX8MQ_ICS_DRAM>; + interconnect-names = "dram"; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + csi1_mipi_ep: endpoint { + remote-endpoint = <&csi1_ep>; + }; + }; + }; + }; + + csi1: csi@30a90000 { + compatible = "fsl,imx7-csi"; + reg = <0x30a90000 0x10000>; + interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MQ_CLK_CSI1_ROOT>; + clock-names = "mclk"; + status = "disabled"; + + port { + csi1_ep: endpoint { + remote-endpoint = <&csi1_mipi_ep>; + }; + }; + }; + + mipi_csi2: csi@30b60000 { + compatible = "fsl,imx8mq-mipi-csi2"; + reg = <0x30b60000 0x1000>; + clocks = <&clk IMX8MQ_CLK_CSI2_CORE>, + <&clk IMX8MQ_CLK_CSI2_ESC>, + <&clk IMX8MQ_CLK_CSI2_PHY_REF>, + <&clk IMX8MQ_CLK_CLKO2>; + clock-names = "core", "esc", "pxl", "clko2"; + assigned-clocks = <&clk IMX8MQ_CLK_CSI2_CORE>, + <&clk IMX8MQ_CLK_CSI2_PHY_REF>, + <&clk IMX8MQ_CLK_CSI2_ESC>; + assigned-clock-rates = <266000000>, <333000000>, <66000000>; + assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_266M>, + <&clk IMX8MQ_SYS2_PLL_1000M>, + <&clk IMX8MQ_SYS1_PLL_800M>; + power-domains = <&pgc_mipi_csi2>; + resets = <&src>; + fsl,mipi-phy-gpr = <&iomuxc_gpr 0xa4>; + interconnects = <&noc IMX8MQ_ICM_CSI2 &noc IMX8MQ_ICS_DRAM>; + interconnect-names = "dram"; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + csi2_mipi_ep: endpoint { + remote-endpoint = <&csi2_ep>; + }; + }; + }; + }; + + csi2: csi@30b80000 { + compatible = "fsl,imx7-csi"; + reg = <0x30b80000 0x10000>; + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MQ_CLK_CSI2_ROOT>; + clock-names = "mclk"; + status = "disabled"; + + port { + csi2_ep: endpoint { + remote-endpoint = <&csi2_mipi_ep>; + }; + }; + }; + mu: mailbox@30aa0000 { compatible = "fsl,imx8mq-mu", "fsl,imx6sx-mu"; reg = <0x30aa0000 0x10000>; -- 2.30.2
WARNING: multiple messages have this Message-ID (diff)
From: Martin Kepplinger <martin.kepplinger@puri.sm> To: martin.kepplinger@puri.sm, laurent.pinchart@ideasonboard.com Cc: devicetree@vger.kernel.org, festevam@gmail.com, kernel@pengutronix.de, kernel@puri.sm, krzk@kernel.org, linux-arm-kernel@lists.infradead.org, linux-imx@nxp.com, linux-kernel@vger.kernel.org, linux-media@vger.kernel.org, linux-staging@lists.linux.dev, mchehab@kernel.org, phone-devel@vger.kernel.org, robh@kernel.org, shawnguo@kernel.org, slongerbeam@gmail.com, m.felsch@pengutronix.de Subject: [PATCH v4 3/3] arm64: dts: imx8mq: add mipi csi phy and csi bridge descriptions Date: Mon, 14 Jun 2021 14:15:22 +0200 [thread overview] Message-ID: <20210614121522.2944593-4-martin.kepplinger@puri.sm> (raw) In-Reply-To: <20210614121522.2944593-1-martin.kepplinger@puri.sm> Describe the 2 available CSI interfaces on the i.MX8MQ with the MIPI-CSI2 receiver and the CSI Bridge that provides the user buffers, where the existing driver can directly be used. An image sensor is to be connected to the MIPIs' second port, described in board files. Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm> --- arch/arm64/boot/dts/freescale/imx8mq.dtsi | 102 ++++++++++++++++++++++ 1 file changed, 102 insertions(+) diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi index 91df9c5350ae..480eaf1dec2b 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi @@ -1099,6 +1099,108 @@ uart4: serial@30a60000 { status = "disabled"; }; + mipi_csi1: csi@30a70000 { + compatible = "fsl,imx8mq-mipi-csi2"; + reg = <0x30a70000 0x1000>; + clocks = <&clk IMX8MQ_CLK_CSI1_CORE>, + <&clk IMX8MQ_CLK_CSI1_ESC>, + <&clk IMX8MQ_CLK_CSI1_PHY_REF>, + <&clk IMX8MQ_CLK_CLKO2>; + clock-names = "core", "esc", "pxl", "clko2"; + assigned-clocks = <&clk IMX8MQ_CLK_CSI1_CORE>, + <&clk IMX8MQ_CLK_CSI1_PHY_REF>, + <&clk IMX8MQ_CLK_CSI1_ESC>; + assigned-clock-rates = <266000000>, <333000000>, <66000000>; + assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_266M>, + <&clk IMX8MQ_SYS2_PLL_1000M>, + <&clk IMX8MQ_SYS1_PLL_800M>; + power-domains = <&pgc_mipi_csi1>; + resets = <&src>; + fsl,mipi-phy-gpr = <&iomuxc_gpr 0x88>; + interconnects = <&noc IMX8MQ_ICM_CSI1 &noc IMX8MQ_ICS_DRAM>; + interconnect-names = "dram"; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + csi1_mipi_ep: endpoint { + remote-endpoint = <&csi1_ep>; + }; + }; + }; + }; + + csi1: csi@30a90000 { + compatible = "fsl,imx7-csi"; + reg = <0x30a90000 0x10000>; + interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MQ_CLK_CSI1_ROOT>; + clock-names = "mclk"; + status = "disabled"; + + port { + csi1_ep: endpoint { + remote-endpoint = <&csi1_mipi_ep>; + }; + }; + }; + + mipi_csi2: csi@30b60000 { + compatible = "fsl,imx8mq-mipi-csi2"; + reg = <0x30b60000 0x1000>; + clocks = <&clk IMX8MQ_CLK_CSI2_CORE>, + <&clk IMX8MQ_CLK_CSI2_ESC>, + <&clk IMX8MQ_CLK_CSI2_PHY_REF>, + <&clk IMX8MQ_CLK_CLKO2>; + clock-names = "core", "esc", "pxl", "clko2"; + assigned-clocks = <&clk IMX8MQ_CLK_CSI2_CORE>, + <&clk IMX8MQ_CLK_CSI2_PHY_REF>, + <&clk IMX8MQ_CLK_CSI2_ESC>; + assigned-clock-rates = <266000000>, <333000000>, <66000000>; + assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_266M>, + <&clk IMX8MQ_SYS2_PLL_1000M>, + <&clk IMX8MQ_SYS1_PLL_800M>; + power-domains = <&pgc_mipi_csi2>; + resets = <&src>; + fsl,mipi-phy-gpr = <&iomuxc_gpr 0xa4>; + interconnects = <&noc IMX8MQ_ICM_CSI2 &noc IMX8MQ_ICS_DRAM>; + interconnect-names = "dram"; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + csi2_mipi_ep: endpoint { + remote-endpoint = <&csi2_ep>; + }; + }; + }; + }; + + csi2: csi@30b80000 { + compatible = "fsl,imx7-csi"; + reg = <0x30b80000 0x10000>; + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MQ_CLK_CSI2_ROOT>; + clock-names = "mclk"; + status = "disabled"; + + port { + csi2_ep: endpoint { + remote-endpoint = <&csi2_mipi_ep>; + }; + }; + }; + mu: mailbox@30aa0000 { compatible = "fsl,imx8mq-mu", "fsl,imx6sx-mu"; reg = <0x30aa0000 0x10000>; -- 2.30.2 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2021-06-14 12:15 UTC|newest] Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-06-14 12:15 [PATCH v4 0/3] media: imx: add support for imx8mq MIPI RX Martin Kepplinger 2021-06-14 12:15 ` Martin Kepplinger 2021-06-14 12:15 ` [PATCH v4 1/3] dt-bindings: media: document the nxp,imx8mq-mipi-csi2 receiver phy and controller Martin Kepplinger 2021-06-14 12:15 ` [PATCH v4 1/3] dt-bindings: media: document the nxp, imx8mq-mipi-csi2 " Martin Kepplinger 2021-06-14 22:15 ` [PATCH v4 1/3] dt-bindings: media: document the nxp,imx8mq-mipi-csi2 " Laurent Pinchart 2021-06-14 22:15 ` Laurent Pinchart 2021-06-14 12:15 ` [PATCH v4 2/3] media: imx: add a driver for i.MX8MQ mipi csi rx " Martin Kepplinger 2021-06-14 12:15 ` Martin Kepplinger 2021-06-14 12:15 ` Martin Kepplinger [this message] 2021-06-14 12:15 ` [PATCH v4 3/3] arm64: dts: imx8mq: add mipi csi phy and csi bridge descriptions Martin Kepplinger 2021-06-14 12:25 ` [PATCH v4.1 " Martin Kepplinger 2021-06-14 12:25 ` Martin Kepplinger 2021-06-14 22:11 ` Laurent Pinchart 2021-06-14 22:11 ` Laurent Pinchart 2021-06-15 8:17 ` Martin Kepplinger 2021-06-15 8:17 ` Martin Kepplinger 2021-06-15 8:17 ` Martin Kepplinger
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20210614121522.2944593-4-martin.kepplinger@puri.sm \ --to=martin.kepplinger@puri.sm \ --cc=devicetree@vger.kernel.org \ --cc=festevam@gmail.com \ --cc=kernel@pengutronix.de \ --cc=kernel@puri.sm \ --cc=krzk@kernel.org \ --cc=laurent.pinchart@ideasonboard.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-imx@nxp.com \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-media@vger.kernel.org \ --cc=linux-staging@lists.linux.dev \ --cc=m.felsch@pengutronix.de \ --cc=mchehab@kernel.org \ --cc=phone-devel@vger.kernel.org \ --cc=robh@kernel.org \ --cc=shawnguo@kernel.org \ --cc=slongerbeam@gmail.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.