[PATCH v3 net-next 0/4] Fixes and improvements to TJA1103 PHY driver

From: Vladimir Oltean <olteanv@gmail.com>
To: Jakub Kicinski <kuba@kernel.org>,
	"David S. Miller" <davem@davemloft.net>,
	netdev@vger.kernel.org
Cc: Florian Fainelli <f.fainelli@gmail.com>,
	Andrew Lunn <andrew@lunn.ch>,
	Heiner Kallweit <hkallweit1@gmail.com>,
	Russell King <linux@armlinux.org.uk>,
	Radu Pirea <radu-nicolae.pirea@oss.nxp.com>,
	Vladimir Oltean <vladimir.oltean@nxp.com>
Subject: [PATCH v3 net-next 0/4] Fixes and improvements to TJA1103 PHY driver
Date: Mon, 14 Jun 2021 16:44:37 +0300	[thread overview]
Message-ID: <20210614134441.497008-1-olteanv@gmail.com> (raw)

From: Vladimir Oltean <vladimir.oltean@nxp.com>

This series contains:
- an erratum workaround for the TJA1103 PHY integrated in SJA1110
- an adaptation of the driver so it prints less unnecessary information
  when probing on SJA1110
- a PTP RX timestamping bug fix and a clarification patch

Targeting net-next since the PHY support is currently in net-next only.

Changes in v3:
Added one more patch which improves the readability of
nxp_c45_reconstruct_ts.

Changes in v2:
Added a comment to the hardware workaround procedure.

Vladimir Oltean (4):
  net: phy: nxp-c45-tja11xx: demote the "no PTP support" message to
    debug
  net: phy: nxp-c45-tja11xx: express timestamp wraparound interval in
    terms of TS_SEC_MASK
  net: phy: nxp-c45-tja11xx: fix potential RX timestamp wraparound
  net: phy: nxp-c45-tja11xx: enable MDIO write access to the
    master/slave registers

 drivers/net/phy/nxp-c45-tja11xx.c | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

-- 
2.25.1