From: trix@redhat.com To: hao.wu@intel.com, mdf@kernel.org, corbet@lwn.net, michal.simek@xilinx.com, gregkh@linuxfoundation.org, krzysztof.kozlowski@canonical.com, nava.manne@xilinx.com, yilun.xu@intel.com, davidgow@google.com, fpacheco@redhat.com, richard.gong@intel.com, luca@lucaceresoli.net Cc: linux-fpga@vger.kernel.org, linux-doc@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, Tom Rix <trix@redhat.com> Subject: [PATCH v4 4/4] fpga: lattice: reorganize to subdir layout Date: Mon, 14 Jun 2021 13:16:48 -0700 [thread overview] Message-ID: <20210614201648.3358206-6-trix@redhat.com> (raw) In-Reply-To: <20210614201648.3358206-1-trix@redhat.com> From: Tom Rix <trix@redhat.com> Follow drivers/net/ethernet/ which has control configs NET_VENDOR_BLA that map to drivers/net/ethernet/bla Since fpgas do not have many vendors, drop the 'VENDOR' and use FPGA_BLA. There are several new subdirs altera/ dfl/ lattice/ xilinx/ Each subdir has a Kconfig that has a new/reused if FPGA_BLA ... existing configs ... endif FPGA_BLA Which is sourced into the main fpga/Kconfig Each subdir has a Makefile whose transversal is controlled in the fpga/Makefile by obj-$(CONFIG_FPGA_BLA) += bla/ This is the lattice/ subdir part. Create a lattice/ subdir Move ice40* and machxo2* files to it. Add a Kconfig and Makefile Signed-off-by: Tom Rix <trix@redhat.com> --- drivers/fpga/Kconfig | 14 +----------- drivers/fpga/Makefile | 13 ++++------- drivers/fpga/lattice/Kconfig | 29 ++++++++++++++++++++++++ drivers/fpga/lattice/Makefile | 4 ++++ drivers/fpga/{ => lattice}/ice40-spi.c | 0 drivers/fpga/{ => lattice}/machxo2-spi.c | 0 6 files changed, 39 insertions(+), 21 deletions(-) create mode 100644 drivers/fpga/lattice/Kconfig create mode 100644 drivers/fpga/lattice/Makefile rename drivers/fpga/{ => lattice}/ice40-spi.c (100%) rename drivers/fpga/{ => lattice}/machxo2-spi.c (100%) diff --git a/drivers/fpga/Kconfig b/drivers/fpga/Kconfig index 2c829b1105925..955b155da3575 100644 --- a/drivers/fpga/Kconfig +++ b/drivers/fpga/Kconfig @@ -12,19 +12,6 @@ menuconfig FPGA if FPGA -config FPGA_MGR_ICE40_SPI - tristate "Lattice iCE40 SPI" - depends on OF && SPI - help - FPGA manager driver support for Lattice iCE40 FPGAs over SPI. - -config FPGA_MGR_MACHXO2_SPI - tristate "Lattice MachXO2 SPI" - depends on SPI - help - FPGA manager driver support for Lattice MachXO2 configuration - over slave SPI interface. - config FPGA_BRIDGE tristate "FPGA Bridge Framework" help @@ -48,6 +35,7 @@ config OF_FPGA_REGION source "drivers/fpga/altera/Kconfig" source "drivers/fpga/dfl/Kconfig" +source "drivers/fpga/lattice/Kconfig" source "drivers/fpga/xilinx/Kconfig" endif # FPGA diff --git a/drivers/fpga/Makefile b/drivers/fpga/Makefile index db83aeb997f24..9197698201e3a 100644 --- a/drivers/fpga/Makefile +++ b/drivers/fpga/Makefile @@ -4,19 +4,16 @@ # # Core FPGA Manager Framework -obj-$(CONFIG_FPGA) += fpga-mgr.o - -# FPGA Manager Drivers -obj-$(CONFIG_FPGA_MGR_ICE40_SPI) += ice40-spi.o -obj-$(CONFIG_FPGA_MGR_MACHXO2_SPI) += machxo2-spi.o +obj-$(CONFIG_FPGA) += fpga-mgr.o # FPGA Bridge Drivers -obj-$(CONFIG_FPGA_BRIDGE) += fpga-bridge.o +obj-$(CONFIG_FPGA_BRIDGE) += fpga-bridge.o # High Level Interfaces -obj-$(CONFIG_FPGA_REGION) += fpga-region.o -obj-$(CONFIG_OF_FPGA_REGION) += of-fpga-region.o +obj-$(CONFIG_FPGA_REGION) += fpga-region.o +obj-$(CONFIG_OF_FPGA_REGION) += of-fpga-region.o obj-$(CONFIG_FPGA_ALTERA) += altera/ obj-$(CONFIG_FPGA_DFL) += dfl/ +obj-$(CONFIG_FPGA_LATTICE) += lattice/ obj-$(CONFIG_FPGA_XILINX) += xilinx/ diff --git a/drivers/fpga/lattice/Kconfig b/drivers/fpga/lattice/Kconfig new file mode 100644 index 0000000000000..6c2f1ae17e4f6 --- /dev/null +++ b/drivers/fpga/lattice/Kconfig @@ -0,0 +1,29 @@ +# SPDX-License-Identifier: GPL-2.0-only + +config FPGA_LATTICE + bool "Lattice FPGAs" + default y + help + If you have a lattice fpga, say Y. + + Note that the answer to this question doesn't directly affect the + kernel: saying N will just cause the configurator to skip all + the questions about lattice fpgas. If you say Y, you will be asked + for your specific device in the following questions. + +if FPGA_LATTICE + +config FPGA_MGR_ICE40_SPI + tristate "Lattice iCE40 SPI" + depends on OF && SPI + help + FPGA manager driver support for Lattice iCE40 FPGAs over SPI. + +config FPGA_MGR_MACHXO2_SPI + tristate "Lattice MachXO2 SPI" + depends on SPI + help + FPGA manager driver support for Lattice MachXO2 configuration + over slave SPI interface. + +endif #FPGA_LATTICE diff --git a/drivers/fpga/lattice/Makefile b/drivers/fpga/lattice/Makefile new file mode 100644 index 0000000000000..f542c96a73d40 --- /dev/null +++ b/drivers/fpga/lattice/Makefile @@ -0,0 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only + +obj-$(CONFIG_FPGA_MGR_ICE40_SPI) += ice40-spi.o +obj-$(CONFIG_FPGA_MGR_MACHXO2_SPI) += machxo2-spi.o diff --git a/drivers/fpga/ice40-spi.c b/drivers/fpga/lattice/ice40-spi.c similarity index 100% rename from drivers/fpga/ice40-spi.c rename to drivers/fpga/lattice/ice40-spi.c diff --git a/drivers/fpga/machxo2-spi.c b/drivers/fpga/lattice/machxo2-spi.c similarity index 100% rename from drivers/fpga/machxo2-spi.c rename to drivers/fpga/lattice/machxo2-spi.c -- 2.26.3
WARNING: multiple messages have this Message-ID (diff)
From: trix@redhat.com To: hao.wu@intel.com, mdf@kernel.org, corbet@lwn.net, michal.simek@xilinx.com, gregkh@linuxfoundation.org, krzysztof.kozlowski@canonical.com, nava.manne@xilinx.com, yilun.xu@intel.com, davidgow@google.com, fpacheco@redhat.com, richard.gong@intel.com, luca@lucaceresoli.net Cc: linux-fpga@vger.kernel.org, linux-doc@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, Tom Rix <trix@redhat.com> Subject: [PATCH v4 4/4] fpga: lattice: reorganize to subdir layout Date: Mon, 14 Jun 2021 13:16:48 -0700 [thread overview] Message-ID: <20210614201648.3358206-6-trix@redhat.com> (raw) In-Reply-To: <20210614201648.3358206-1-trix@redhat.com> From: Tom Rix <trix@redhat.com> Follow drivers/net/ethernet/ which has control configs NET_VENDOR_BLA that map to drivers/net/ethernet/bla Since fpgas do not have many vendors, drop the 'VENDOR' and use FPGA_BLA. There are several new subdirs altera/ dfl/ lattice/ xilinx/ Each subdir has a Kconfig that has a new/reused if FPGA_BLA ... existing configs ... endif FPGA_BLA Which is sourced into the main fpga/Kconfig Each subdir has a Makefile whose transversal is controlled in the fpga/Makefile by obj-$(CONFIG_FPGA_BLA) += bla/ This is the lattice/ subdir part. Create a lattice/ subdir Move ice40* and machxo2* files to it. Add a Kconfig and Makefile Signed-off-by: Tom Rix <trix@redhat.com> --- drivers/fpga/Kconfig | 14 +----------- drivers/fpga/Makefile | 13 ++++------- drivers/fpga/lattice/Kconfig | 29 ++++++++++++++++++++++++ drivers/fpga/lattice/Makefile | 4 ++++ drivers/fpga/{ => lattice}/ice40-spi.c | 0 drivers/fpga/{ => lattice}/machxo2-spi.c | 0 6 files changed, 39 insertions(+), 21 deletions(-) create mode 100644 drivers/fpga/lattice/Kconfig create mode 100644 drivers/fpga/lattice/Makefile rename drivers/fpga/{ => lattice}/ice40-spi.c (100%) rename drivers/fpga/{ => lattice}/machxo2-spi.c (100%) diff --git a/drivers/fpga/Kconfig b/drivers/fpga/Kconfig index 2c829b1105925..955b155da3575 100644 --- a/drivers/fpga/Kconfig +++ b/drivers/fpga/Kconfig @@ -12,19 +12,6 @@ menuconfig FPGA if FPGA -config FPGA_MGR_ICE40_SPI - tristate "Lattice iCE40 SPI" - depends on OF && SPI - help - FPGA manager driver support for Lattice iCE40 FPGAs over SPI. - -config FPGA_MGR_MACHXO2_SPI - tristate "Lattice MachXO2 SPI" - depends on SPI - help - FPGA manager driver support for Lattice MachXO2 configuration - over slave SPI interface. - config FPGA_BRIDGE tristate "FPGA Bridge Framework" help @@ -48,6 +35,7 @@ config OF_FPGA_REGION source "drivers/fpga/altera/Kconfig" source "drivers/fpga/dfl/Kconfig" +source "drivers/fpga/lattice/Kconfig" source "drivers/fpga/xilinx/Kconfig" endif # FPGA diff --git a/drivers/fpga/Makefile b/drivers/fpga/Makefile index db83aeb997f24..9197698201e3a 100644 --- a/drivers/fpga/Makefile +++ b/drivers/fpga/Makefile @@ -4,19 +4,16 @@ # # Core FPGA Manager Framework -obj-$(CONFIG_FPGA) += fpga-mgr.o - -# FPGA Manager Drivers -obj-$(CONFIG_FPGA_MGR_ICE40_SPI) += ice40-spi.o -obj-$(CONFIG_FPGA_MGR_MACHXO2_SPI) += machxo2-spi.o +obj-$(CONFIG_FPGA) += fpga-mgr.o # FPGA Bridge Drivers -obj-$(CONFIG_FPGA_BRIDGE) += fpga-bridge.o +obj-$(CONFIG_FPGA_BRIDGE) += fpga-bridge.o # High Level Interfaces -obj-$(CONFIG_FPGA_REGION) += fpga-region.o -obj-$(CONFIG_OF_FPGA_REGION) += of-fpga-region.o +obj-$(CONFIG_FPGA_REGION) += fpga-region.o +obj-$(CONFIG_OF_FPGA_REGION) += of-fpga-region.o obj-$(CONFIG_FPGA_ALTERA) += altera/ obj-$(CONFIG_FPGA_DFL) += dfl/ +obj-$(CONFIG_FPGA_LATTICE) += lattice/ obj-$(CONFIG_FPGA_XILINX) += xilinx/ diff --git a/drivers/fpga/lattice/Kconfig b/drivers/fpga/lattice/Kconfig new file mode 100644 index 0000000000000..6c2f1ae17e4f6 --- /dev/null +++ b/drivers/fpga/lattice/Kconfig @@ -0,0 +1,29 @@ +# SPDX-License-Identifier: GPL-2.0-only + +config FPGA_LATTICE + bool "Lattice FPGAs" + default y + help + If you have a lattice fpga, say Y. + + Note that the answer to this question doesn't directly affect the + kernel: saying N will just cause the configurator to skip all + the questions about lattice fpgas. If you say Y, you will be asked + for your specific device in the following questions. + +if FPGA_LATTICE + +config FPGA_MGR_ICE40_SPI + tristate "Lattice iCE40 SPI" + depends on OF && SPI + help + FPGA manager driver support for Lattice iCE40 FPGAs over SPI. + +config FPGA_MGR_MACHXO2_SPI + tristate "Lattice MachXO2 SPI" + depends on SPI + help + FPGA manager driver support for Lattice MachXO2 configuration + over slave SPI interface. + +endif #FPGA_LATTICE diff --git a/drivers/fpga/lattice/Makefile b/drivers/fpga/lattice/Makefile new file mode 100644 index 0000000000000..f542c96a73d40 --- /dev/null +++ b/drivers/fpga/lattice/Makefile @@ -0,0 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only + +obj-$(CONFIG_FPGA_MGR_ICE40_SPI) += ice40-spi.o +obj-$(CONFIG_FPGA_MGR_MACHXO2_SPI) += machxo2-spi.o diff --git a/drivers/fpga/ice40-spi.c b/drivers/fpga/lattice/ice40-spi.c similarity index 100% rename from drivers/fpga/ice40-spi.c rename to drivers/fpga/lattice/ice40-spi.c diff --git a/drivers/fpga/machxo2-spi.c b/drivers/fpga/lattice/machxo2-spi.c similarity index 100% rename from drivers/fpga/machxo2-spi.c rename to drivers/fpga/lattice/machxo2-spi.c -- 2.26.3 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2021-06-14 20:17 UTC|newest] Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-06-14 20:16 [PATCH v4 0/4] fpga: reorganize to subdirs trix 2021-06-14 20:16 ` trix 2021-06-14 20:16 ` [PATCH v4 1/4] fpga: dfl: reorganize to subdir layout trix 2021-06-14 20:16 ` trix 2021-06-15 8:08 ` Wu, Hao 2021-06-15 8:08 ` Wu, Hao 2021-06-15 20:48 ` Tom Rix 2021-06-15 20:48 ` Tom Rix 2021-06-16 1:05 ` Wu, Hao 2021-06-16 1:05 ` Wu, Hao 2021-06-17 4:43 ` Moritz Fischer 2021-06-17 4:43 ` Moritz Fischer 2021-06-17 8:34 ` Wu, Hao 2021-06-17 8:34 ` Wu, Hao 2021-06-17 13:21 ` Tom Rix 2021-06-17 13:21 ` Tom Rix 2021-06-18 22:04 ` Moritz Fischer 2021-06-18 22:04 ` Moritz Fischer 2021-06-14 20:16 ` [PATCH v4 2/4] fpga: xilinx: " trix 2021-06-14 20:16 ` trix 2021-06-15 7:36 ` Greg KH 2021-06-15 7:36 ` Greg KH 2021-06-15 20:19 ` Tom Rix 2021-06-15 20:19 ` Tom Rix 2021-06-16 6:44 ` Greg KH 2021-06-16 6:44 ` Greg KH 2021-06-14 20:16 ` [PATCH v4 3/4] fpga: altera: " trix 2021-06-14 20:16 ` trix 2021-06-14 20:16 ` trix [this message] 2021-06-14 20:16 ` [PATCH v4 4/4] fpga: lattice: " trix
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20210614201648.3358206-6-trix@redhat.com \ --to=trix@redhat.com \ --cc=corbet@lwn.net \ --cc=davidgow@google.com \ --cc=fpacheco@redhat.com \ --cc=gregkh@linuxfoundation.org \ --cc=hao.wu@intel.com \ --cc=krzysztof.kozlowski@canonical.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-doc@vger.kernel.org \ --cc=linux-fpga@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=luca@lucaceresoli.net \ --cc=mdf@kernel.org \ --cc=michal.simek@xilinx.com \ --cc=nava.manne@xilinx.com \ --cc=richard.gong@intel.com \ --cc=yilun.xu@intel.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.