From: Andre Przywara <andre.przywara@arm.com>
To: Maxime Ripard <mripard@kernel.org>, Chen-Yu Tsai <wens@csie.org>,
Jernej Skrabec <jernej.skrabec@gmail.com>
Cc: Rob Herring <robh@kernel.org>, Icenowy Zheng <icenowy@aosc.io>,
Samuel Holland <samuel@sholland.org>,
linux-arm-kernel@lists.infradead.org,
linux-sunxi@googlegroups.com, linux-sunxi@lists.linux.dev,
linux-kernel@vger.kernel.org, Ondrej Jirman <megous@megous.com>,
Kishon Vijay Abraham I <kishon@ti.com>,
Vinod Koul <vkoul@kernel.org>,
linux-phy@lists.infradead.org, linux-usb@vger.kernel.org
Subject: [PATCH v7 12/19] phy: sun4i-usb: Rework HCI PHY (aka. "pmu_unk1") handling
Date: Tue, 15 Jun 2021 12:06:29 +0100 [thread overview]
Message-ID: <20210615110636.23403-13-andre.przywara@arm.com> (raw)
In-Reply-To: <20210615110636.23403-1-andre.przywara@arm.com>
As Icenowy pointed out, newer manuals (starting with H6) actually
document the register block at offset 0x800 as "HCI controller and PHY
interface", also describe the bits in our "PMU_UNK1" register.
Let's put proper names to those "unknown" variables and symbols.
While we are at it, generalise the existing code by allowing a bitmap
of bits to clear and set, to cover newer SoCs: The A100 and H616 use a
different bit for the SIDDQ control.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
---
drivers/phy/allwinner/phy-sun4i-usb.c | 30 ++++++++++++---------------
1 file changed, 13 insertions(+), 17 deletions(-)
diff --git a/drivers/phy/allwinner/phy-sun4i-usb.c b/drivers/phy/allwinner/phy-sun4i-usb.c
index 788dd5cdbb7d..142f4cafdc78 100644
--- a/drivers/phy/allwinner/phy-sun4i-usb.c
+++ b/drivers/phy/allwinner/phy-sun4i-usb.c
@@ -43,7 +43,7 @@
#define REG_PHYCTL_A33 0x10
#define REG_PHY_OTGCTL 0x20
-#define REG_PMU_UNK1 0x10
+#define REG_HCI_PHY_CTL 0x10
#define PHYCTL_DATA BIT(7)
@@ -82,6 +82,7 @@
/* A83T specific control bits for PHY0 */
#define PHY_CTL_VBUSVLDEXT BIT(5)
#define PHY_CTL_SIDDQ BIT(3)
+#define PHY_CTL_H3_SIDDQ BIT(1)
/* A83T specific control bits for PHY2 HSIC */
#define SUNXI_EHCI_HS_FORCE BIT(20)
@@ -115,9 +116,9 @@ struct sun4i_usb_phy_cfg {
int hsic_index;
enum sun4i_usb_phy_type type;
u32 disc_thresh;
+ u32 hci_phy_ctl_clear;
u8 phyctl_offset;
bool dedicated_clocks;
- bool enable_pmu_unk1;
bool phy0_dual_route;
int missing_phys;
};
@@ -288,6 +289,12 @@ static int sun4i_usb_phy_init(struct phy *_phy)
return ret;
}
+ if (phy->pmu && data->cfg->hci_phy_ctl_clear) {
+ val = readl(phy->pmu + REG_HCI_PHY_CTL);
+ val &= ~data->cfg->hci_phy_ctl_clear;
+ writel(val, phy->pmu + REG_HCI_PHY_CTL);
+ }
+
if (data->cfg->type == sun8i_a83t_phy ||
data->cfg->type == sun50i_h6_phy) {
if (phy->index == 0) {
@@ -297,11 +304,6 @@ static int sun4i_usb_phy_init(struct phy *_phy)
writel(val, data->base + data->cfg->phyctl_offset);
}
} else {
- if (phy->pmu && data->cfg->enable_pmu_unk1) {
- val = readl(phy->pmu + REG_PMU_UNK1);
- writel(val & ~2, phy->pmu + REG_PMU_UNK1);
- }
-
/* Enable USB 45 Ohm resistor calibration */
if (phy->index == 0)
sun4i_usb_phy_write(phy, PHY_RES45_CAL_EN, 0x01, 1);
@@ -863,7 +865,6 @@ static const struct sun4i_usb_phy_cfg sun4i_a10_cfg = {
.disc_thresh = 3,
.phyctl_offset = REG_PHYCTL_A10,
.dedicated_clocks = false,
- .enable_pmu_unk1 = false,
};
static const struct sun4i_usb_phy_cfg sun5i_a13_cfg = {
@@ -872,7 +873,6 @@ static const struct sun4i_usb_phy_cfg sun5i_a13_cfg = {
.disc_thresh = 2,
.phyctl_offset = REG_PHYCTL_A10,
.dedicated_clocks = false,
- .enable_pmu_unk1 = false,
};
static const struct sun4i_usb_phy_cfg sun6i_a31_cfg = {
@@ -881,7 +881,6 @@ static const struct sun4i_usb_phy_cfg sun6i_a31_cfg = {
.disc_thresh = 3,
.phyctl_offset = REG_PHYCTL_A10,
.dedicated_clocks = true,
- .enable_pmu_unk1 = false,
};
static const struct sun4i_usb_phy_cfg sun7i_a20_cfg = {
@@ -890,7 +889,6 @@ static const struct sun4i_usb_phy_cfg sun7i_a20_cfg = {
.disc_thresh = 2,
.phyctl_offset = REG_PHYCTL_A10,
.dedicated_clocks = false,
- .enable_pmu_unk1 = false,
};
static const struct sun4i_usb_phy_cfg sun8i_a23_cfg = {
@@ -899,7 +897,6 @@ static const struct sun4i_usb_phy_cfg sun8i_a23_cfg = {
.disc_thresh = 3,
.phyctl_offset = REG_PHYCTL_A10,
.dedicated_clocks = true,
- .enable_pmu_unk1 = false,
};
static const struct sun4i_usb_phy_cfg sun8i_a33_cfg = {
@@ -908,7 +905,6 @@ static const struct sun4i_usb_phy_cfg sun8i_a33_cfg = {
.disc_thresh = 3,
.phyctl_offset = REG_PHYCTL_A33,
.dedicated_clocks = true,
- .enable_pmu_unk1 = false,
};
static const struct sun4i_usb_phy_cfg sun8i_a83t_cfg = {
@@ -925,7 +921,7 @@ static const struct sun4i_usb_phy_cfg sun8i_h3_cfg = {
.disc_thresh = 3,
.phyctl_offset = REG_PHYCTL_A33,
.dedicated_clocks = true,
- .enable_pmu_unk1 = true,
+ .hci_phy_ctl_clear = PHY_CTL_H3_SIDDQ,
.phy0_dual_route = true,
};
@@ -935,7 +931,7 @@ static const struct sun4i_usb_phy_cfg sun8i_r40_cfg = {
.disc_thresh = 3,
.phyctl_offset = REG_PHYCTL_A33,
.dedicated_clocks = true,
- .enable_pmu_unk1 = true,
+ .hci_phy_ctl_clear = PHY_CTL_H3_SIDDQ,
.phy0_dual_route = true,
};
@@ -945,7 +941,7 @@ static const struct sun4i_usb_phy_cfg sun8i_v3s_cfg = {
.disc_thresh = 3,
.phyctl_offset = REG_PHYCTL_A33,
.dedicated_clocks = true,
- .enable_pmu_unk1 = true,
+ .hci_phy_ctl_clear = PHY_CTL_H3_SIDDQ,
.phy0_dual_route = true,
};
@@ -955,7 +951,7 @@ static const struct sun4i_usb_phy_cfg sun50i_a64_cfg = {
.disc_thresh = 3,
.phyctl_offset = REG_PHYCTL_A33,
.dedicated_clocks = true,
- .enable_pmu_unk1 = true,
+ .hci_phy_ctl_clear = PHY_CTL_H3_SIDDQ,
.phy0_dual_route = true,
};
--
2.17.5
WARNING: multiple messages have this Message-ID (diff)
From: Andre Przywara <andre.przywara@arm.com>
To: Maxime Ripard <mripard@kernel.org>, Chen-Yu Tsai <wens@csie.org>,
Jernej Skrabec <jernej.skrabec@gmail.com>
Cc: Rob Herring <robh@kernel.org>, Icenowy Zheng <icenowy@aosc.io>,
Samuel Holland <samuel@sholland.org>,
linux-arm-kernel@lists.infradead.org,
linux-sunxi@googlegroups.com, linux-sunxi@lists.linux.dev,
linux-kernel@vger.kernel.org, Ondrej Jirman <megous@megous.com>,
Kishon Vijay Abraham I <kishon@ti.com>,
Vinod Koul <vkoul@kernel.org>,
linux-phy@lists.infradead.org, linux-usb@vger.kernel.org
Subject: [PATCH v7 12/19] phy: sun4i-usb: Rework HCI PHY (aka. "pmu_unk1") handling
Date: Tue, 15 Jun 2021 12:06:29 +0100 [thread overview]
Message-ID: <20210615110636.23403-13-andre.przywara@arm.com> (raw)
In-Reply-To: <20210615110636.23403-1-andre.przywara@arm.com>
As Icenowy pointed out, newer manuals (starting with H6) actually
document the register block at offset 0x800 as "HCI controller and PHY
interface", also describe the bits in our "PMU_UNK1" register.
Let's put proper names to those "unknown" variables and symbols.
While we are at it, generalise the existing code by allowing a bitmap
of bits to clear and set, to cover newer SoCs: The A100 and H616 use a
different bit for the SIDDQ control.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
---
drivers/phy/allwinner/phy-sun4i-usb.c | 30 ++++++++++++---------------
1 file changed, 13 insertions(+), 17 deletions(-)
diff --git a/drivers/phy/allwinner/phy-sun4i-usb.c b/drivers/phy/allwinner/phy-sun4i-usb.c
index 788dd5cdbb7d..142f4cafdc78 100644
--- a/drivers/phy/allwinner/phy-sun4i-usb.c
+++ b/drivers/phy/allwinner/phy-sun4i-usb.c
@@ -43,7 +43,7 @@
#define REG_PHYCTL_A33 0x10
#define REG_PHY_OTGCTL 0x20
-#define REG_PMU_UNK1 0x10
+#define REG_HCI_PHY_CTL 0x10
#define PHYCTL_DATA BIT(7)
@@ -82,6 +82,7 @@
/* A83T specific control bits for PHY0 */
#define PHY_CTL_VBUSVLDEXT BIT(5)
#define PHY_CTL_SIDDQ BIT(3)
+#define PHY_CTL_H3_SIDDQ BIT(1)
/* A83T specific control bits for PHY2 HSIC */
#define SUNXI_EHCI_HS_FORCE BIT(20)
@@ -115,9 +116,9 @@ struct sun4i_usb_phy_cfg {
int hsic_index;
enum sun4i_usb_phy_type type;
u32 disc_thresh;
+ u32 hci_phy_ctl_clear;
u8 phyctl_offset;
bool dedicated_clocks;
- bool enable_pmu_unk1;
bool phy0_dual_route;
int missing_phys;
};
@@ -288,6 +289,12 @@ static int sun4i_usb_phy_init(struct phy *_phy)
return ret;
}
+ if (phy->pmu && data->cfg->hci_phy_ctl_clear) {
+ val = readl(phy->pmu + REG_HCI_PHY_CTL);
+ val &= ~data->cfg->hci_phy_ctl_clear;
+ writel(val, phy->pmu + REG_HCI_PHY_CTL);
+ }
+
if (data->cfg->type == sun8i_a83t_phy ||
data->cfg->type == sun50i_h6_phy) {
if (phy->index == 0) {
@@ -297,11 +304,6 @@ static int sun4i_usb_phy_init(struct phy *_phy)
writel(val, data->base + data->cfg->phyctl_offset);
}
} else {
- if (phy->pmu && data->cfg->enable_pmu_unk1) {
- val = readl(phy->pmu + REG_PMU_UNK1);
- writel(val & ~2, phy->pmu + REG_PMU_UNK1);
- }
-
/* Enable USB 45 Ohm resistor calibration */
if (phy->index == 0)
sun4i_usb_phy_write(phy, PHY_RES45_CAL_EN, 0x01, 1);
@@ -863,7 +865,6 @@ static const struct sun4i_usb_phy_cfg sun4i_a10_cfg = {
.disc_thresh = 3,
.phyctl_offset = REG_PHYCTL_A10,
.dedicated_clocks = false,
- .enable_pmu_unk1 = false,
};
static const struct sun4i_usb_phy_cfg sun5i_a13_cfg = {
@@ -872,7 +873,6 @@ static const struct sun4i_usb_phy_cfg sun5i_a13_cfg = {
.disc_thresh = 2,
.phyctl_offset = REG_PHYCTL_A10,
.dedicated_clocks = false,
- .enable_pmu_unk1 = false,
};
static const struct sun4i_usb_phy_cfg sun6i_a31_cfg = {
@@ -881,7 +881,6 @@ static const struct sun4i_usb_phy_cfg sun6i_a31_cfg = {
.disc_thresh = 3,
.phyctl_offset = REG_PHYCTL_A10,
.dedicated_clocks = true,
- .enable_pmu_unk1 = false,
};
static const struct sun4i_usb_phy_cfg sun7i_a20_cfg = {
@@ -890,7 +889,6 @@ static const struct sun4i_usb_phy_cfg sun7i_a20_cfg = {
.disc_thresh = 2,
.phyctl_offset = REG_PHYCTL_A10,
.dedicated_clocks = false,
- .enable_pmu_unk1 = false,
};
static const struct sun4i_usb_phy_cfg sun8i_a23_cfg = {
@@ -899,7 +897,6 @@ static const struct sun4i_usb_phy_cfg sun8i_a23_cfg = {
.disc_thresh = 3,
.phyctl_offset = REG_PHYCTL_A10,
.dedicated_clocks = true,
- .enable_pmu_unk1 = false,
};
static const struct sun4i_usb_phy_cfg sun8i_a33_cfg = {
@@ -908,7 +905,6 @@ static const struct sun4i_usb_phy_cfg sun8i_a33_cfg = {
.disc_thresh = 3,
.phyctl_offset = REG_PHYCTL_A33,
.dedicated_clocks = true,
- .enable_pmu_unk1 = false,
};
static const struct sun4i_usb_phy_cfg sun8i_a83t_cfg = {
@@ -925,7 +921,7 @@ static const struct sun4i_usb_phy_cfg sun8i_h3_cfg = {
.disc_thresh = 3,
.phyctl_offset = REG_PHYCTL_A33,
.dedicated_clocks = true,
- .enable_pmu_unk1 = true,
+ .hci_phy_ctl_clear = PHY_CTL_H3_SIDDQ,
.phy0_dual_route = true,
};
@@ -935,7 +931,7 @@ static const struct sun4i_usb_phy_cfg sun8i_r40_cfg = {
.disc_thresh = 3,
.phyctl_offset = REG_PHYCTL_A33,
.dedicated_clocks = true,
- .enable_pmu_unk1 = true,
+ .hci_phy_ctl_clear = PHY_CTL_H3_SIDDQ,
.phy0_dual_route = true,
};
@@ -945,7 +941,7 @@ static const struct sun4i_usb_phy_cfg sun8i_v3s_cfg = {
.disc_thresh = 3,
.phyctl_offset = REG_PHYCTL_A33,
.dedicated_clocks = true,
- .enable_pmu_unk1 = true,
+ .hci_phy_ctl_clear = PHY_CTL_H3_SIDDQ,
.phy0_dual_route = true,
};
@@ -955,7 +951,7 @@ static const struct sun4i_usb_phy_cfg sun50i_a64_cfg = {
.disc_thresh = 3,
.phyctl_offset = REG_PHYCTL_A33,
.dedicated_clocks = true,
- .enable_pmu_unk1 = true,
+ .hci_phy_ctl_clear = PHY_CTL_H3_SIDDQ,
.phy0_dual_route = true,
};
--
2.17.5
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: Andre Przywara <andre.przywara@arm.com>
To: Maxime Ripard <mripard@kernel.org>, Chen-Yu Tsai <wens@csie.org>,
Jernej Skrabec <jernej.skrabec@gmail.com>
Cc: Rob Herring <robh@kernel.org>, Icenowy Zheng <icenowy@aosc.io>,
Samuel Holland <samuel@sholland.org>,
linux-arm-kernel@lists.infradead.org,
linux-sunxi@googlegroups.com, linux-sunxi@lists.linux.dev,
linux-kernel@vger.kernel.org, Ondrej Jirman <megous@megous.com>,
Kishon Vijay Abraham I <kishon@ti.com>,
Vinod Koul <vkoul@kernel.org>,
linux-phy@lists.infradead.org, linux-usb@vger.kernel.org
Subject: [PATCH v7 12/19] phy: sun4i-usb: Rework HCI PHY (aka. "pmu_unk1") handling
Date: Tue, 15 Jun 2021 12:06:29 +0100 [thread overview]
Message-ID: <20210615110636.23403-13-andre.przywara@arm.com> (raw)
In-Reply-To: <20210615110636.23403-1-andre.przywara@arm.com>
As Icenowy pointed out, newer manuals (starting with H6) actually
document the register block at offset 0x800 as "HCI controller and PHY
interface", also describe the bits in our "PMU_UNK1" register.
Let's put proper names to those "unknown" variables and symbols.
While we are at it, generalise the existing code by allowing a bitmap
of bits to clear and set, to cover newer SoCs: The A100 and H616 use a
different bit for the SIDDQ control.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
---
drivers/phy/allwinner/phy-sun4i-usb.c | 30 ++++++++++++---------------
1 file changed, 13 insertions(+), 17 deletions(-)
diff --git a/drivers/phy/allwinner/phy-sun4i-usb.c b/drivers/phy/allwinner/phy-sun4i-usb.c
index 788dd5cdbb7d..142f4cafdc78 100644
--- a/drivers/phy/allwinner/phy-sun4i-usb.c
+++ b/drivers/phy/allwinner/phy-sun4i-usb.c
@@ -43,7 +43,7 @@
#define REG_PHYCTL_A33 0x10
#define REG_PHY_OTGCTL 0x20
-#define REG_PMU_UNK1 0x10
+#define REG_HCI_PHY_CTL 0x10
#define PHYCTL_DATA BIT(7)
@@ -82,6 +82,7 @@
/* A83T specific control bits for PHY0 */
#define PHY_CTL_VBUSVLDEXT BIT(5)
#define PHY_CTL_SIDDQ BIT(3)
+#define PHY_CTL_H3_SIDDQ BIT(1)
/* A83T specific control bits for PHY2 HSIC */
#define SUNXI_EHCI_HS_FORCE BIT(20)
@@ -115,9 +116,9 @@ struct sun4i_usb_phy_cfg {
int hsic_index;
enum sun4i_usb_phy_type type;
u32 disc_thresh;
+ u32 hci_phy_ctl_clear;
u8 phyctl_offset;
bool dedicated_clocks;
- bool enable_pmu_unk1;
bool phy0_dual_route;
int missing_phys;
};
@@ -288,6 +289,12 @@ static int sun4i_usb_phy_init(struct phy *_phy)
return ret;
}
+ if (phy->pmu && data->cfg->hci_phy_ctl_clear) {
+ val = readl(phy->pmu + REG_HCI_PHY_CTL);
+ val &= ~data->cfg->hci_phy_ctl_clear;
+ writel(val, phy->pmu + REG_HCI_PHY_CTL);
+ }
+
if (data->cfg->type == sun8i_a83t_phy ||
data->cfg->type == sun50i_h6_phy) {
if (phy->index == 0) {
@@ -297,11 +304,6 @@ static int sun4i_usb_phy_init(struct phy *_phy)
writel(val, data->base + data->cfg->phyctl_offset);
}
} else {
- if (phy->pmu && data->cfg->enable_pmu_unk1) {
- val = readl(phy->pmu + REG_PMU_UNK1);
- writel(val & ~2, phy->pmu + REG_PMU_UNK1);
- }
-
/* Enable USB 45 Ohm resistor calibration */
if (phy->index == 0)
sun4i_usb_phy_write(phy, PHY_RES45_CAL_EN, 0x01, 1);
@@ -863,7 +865,6 @@ static const struct sun4i_usb_phy_cfg sun4i_a10_cfg = {
.disc_thresh = 3,
.phyctl_offset = REG_PHYCTL_A10,
.dedicated_clocks = false,
- .enable_pmu_unk1 = false,
};
static const struct sun4i_usb_phy_cfg sun5i_a13_cfg = {
@@ -872,7 +873,6 @@ static const struct sun4i_usb_phy_cfg sun5i_a13_cfg = {
.disc_thresh = 2,
.phyctl_offset = REG_PHYCTL_A10,
.dedicated_clocks = false,
- .enable_pmu_unk1 = false,
};
static const struct sun4i_usb_phy_cfg sun6i_a31_cfg = {
@@ -881,7 +881,6 @@ static const struct sun4i_usb_phy_cfg sun6i_a31_cfg = {
.disc_thresh = 3,
.phyctl_offset = REG_PHYCTL_A10,
.dedicated_clocks = true,
- .enable_pmu_unk1 = false,
};
static const struct sun4i_usb_phy_cfg sun7i_a20_cfg = {
@@ -890,7 +889,6 @@ static const struct sun4i_usb_phy_cfg sun7i_a20_cfg = {
.disc_thresh = 2,
.phyctl_offset = REG_PHYCTL_A10,
.dedicated_clocks = false,
- .enable_pmu_unk1 = false,
};
static const struct sun4i_usb_phy_cfg sun8i_a23_cfg = {
@@ -899,7 +897,6 @@ static const struct sun4i_usb_phy_cfg sun8i_a23_cfg = {
.disc_thresh = 3,
.phyctl_offset = REG_PHYCTL_A10,
.dedicated_clocks = true,
- .enable_pmu_unk1 = false,
};
static const struct sun4i_usb_phy_cfg sun8i_a33_cfg = {
@@ -908,7 +905,6 @@ static const struct sun4i_usb_phy_cfg sun8i_a33_cfg = {
.disc_thresh = 3,
.phyctl_offset = REG_PHYCTL_A33,
.dedicated_clocks = true,
- .enable_pmu_unk1 = false,
};
static const struct sun4i_usb_phy_cfg sun8i_a83t_cfg = {
@@ -925,7 +921,7 @@ static const struct sun4i_usb_phy_cfg sun8i_h3_cfg = {
.disc_thresh = 3,
.phyctl_offset = REG_PHYCTL_A33,
.dedicated_clocks = true,
- .enable_pmu_unk1 = true,
+ .hci_phy_ctl_clear = PHY_CTL_H3_SIDDQ,
.phy0_dual_route = true,
};
@@ -935,7 +931,7 @@ static const struct sun4i_usb_phy_cfg sun8i_r40_cfg = {
.disc_thresh = 3,
.phyctl_offset = REG_PHYCTL_A33,
.dedicated_clocks = true,
- .enable_pmu_unk1 = true,
+ .hci_phy_ctl_clear = PHY_CTL_H3_SIDDQ,
.phy0_dual_route = true,
};
@@ -945,7 +941,7 @@ static const struct sun4i_usb_phy_cfg sun8i_v3s_cfg = {
.disc_thresh = 3,
.phyctl_offset = REG_PHYCTL_A33,
.dedicated_clocks = true,
- .enable_pmu_unk1 = true,
+ .hci_phy_ctl_clear = PHY_CTL_H3_SIDDQ,
.phy0_dual_route = true,
};
@@ -955,7 +951,7 @@ static const struct sun4i_usb_phy_cfg sun50i_a64_cfg = {
.disc_thresh = 3,
.phyctl_offset = REG_PHYCTL_A33,
.dedicated_clocks = true,
- .enable_pmu_unk1 = true,
+ .hci_phy_ctl_clear = PHY_CTL_H3_SIDDQ,
.phy0_dual_route = true,
};
--
2.17.5
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
next prev parent reply other threads:[~2021-06-15 11:07 UTC|newest]
Thread overview: 105+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-15 11:06 [PATCH v7 00/19] arm64: sunxi: Initial Allwinner H616 SoC support Andre Przywara
2021-06-15 11:06 ` Andre Przywara
2021-06-15 11:06 ` [PATCH v7 01/19] dt-bindings: mfd: axp20x: Add AXP305 compatible (plus optional IRQ) Andre Przywara
2021-06-15 11:06 ` Andre Przywara
2021-06-15 23:33 ` Rob Herring
2021-06-15 23:33 ` Rob Herring
2021-06-16 14:57 ` Andre Przywara
2021-06-16 14:57 ` Andre Przywara
2021-06-15 11:06 ` [PATCH v7 02/19] mfd: axp20x: Allow AXP 806 chips without interrupt lines Andre Przywara
2021-06-15 11:06 ` Andre Przywara
2021-06-15 11:06 ` [PATCH v7 03/19] dt-bindings: rtc: sun6i: Add H616 compatible string Andre Przywara
2021-06-15 11:06 ` Andre Przywara
2021-06-15 23:35 ` Rob Herring
2021-06-15 23:35 ` Rob Herring
2021-06-16 14:59 ` Andre Przywara
2021-06-16 14:59 ` Andre Przywara
2021-06-15 11:06 ` [PATCH v7 04/19] rtc: sun6i: Add support for linear day storage Andre Przywara
2021-06-15 11:06 ` Andre Przywara
2021-06-17 18:16 ` kernel test robot
2021-06-17 18:16 ` kernel test robot
2021-06-17 18:16 ` kernel test robot
2021-06-17 20:07 ` kernel test robot
2021-06-17 20:07 ` kernel test robot
2021-06-17 20:07 ` kernel test robot
2021-06-18 15:43 ` Andre Przywara
2021-06-18 15:43 ` Andre Przywara
2021-06-18 15:43 ` Andre Przywara
2021-06-15 11:06 ` [PATCH v7 05/19] rtc: sun6i: Add support for broken-down alarm registers Andre Przywara
2021-06-15 11:06 ` Andre Przywara
2021-06-17 23:17 ` kernel test robot
2021-06-17 23:17 ` kernel test robot
2021-06-17 23:17 ` kernel test robot
2021-06-15 11:06 ` [PATCH v7 06/19] rtc: sun6i: Add support for RTCs without external LOSCs Andre Przywara
2021-06-15 11:06 ` Andre Przywara
2021-06-16 9:14 ` Maxime Ripard
2021-06-16 9:14 ` Maxime Ripard
2021-06-16 10:14 ` Andre Przywara
2021-06-16 10:14 ` Andre Przywara
2021-06-16 13:47 ` Maxime Ripard
2021-06-16 13:47 ` Maxime Ripard
2021-07-22 23:17 ` Andre Przywara
2021-07-22 23:17 ` Andre Przywara
2021-07-26 14:59 ` Maxime Ripard
2021-07-26 14:59 ` Maxime Ripard
2021-07-29 8:04 ` Icenowy Zheng
2021-07-29 8:04 ` Icenowy Zheng
2021-07-29 8:04 ` Icenowy Zheng
2021-07-29 10:32 ` Maxime Ripard
2021-07-29 10:32 ` Maxime Ripard
2021-07-29 13:04 ` Icenowy Zheng
2021-07-29 13:04 ` Icenowy Zheng
2021-06-15 11:06 ` [PATCH v7 07/19] rtc: sun6i: Add Allwinner H616 support Andre Przywara
2021-06-15 11:06 ` Andre Przywara
2021-06-15 11:06 ` [PATCH v7 08/19] dt-bindings: net: sun8i-emac: Add H616 compatible string Andre Przywara
2021-06-15 11:06 ` Andre Przywara
2021-06-15 11:06 ` [PATCH v7 09/19] net: stmmac: dwmac-sun8i: Prepare for second EMAC clock register Andre Przywara
2021-06-15 11:06 ` Andre Przywara
2021-06-15 11:06 ` [PATCH v7 10/19] dt-bindings: usb: Add H616 compatible string Andre Przywara
2021-06-15 11:06 ` Andre Przywara
2021-06-15 11:06 ` Andre Przywara
2021-06-15 11:06 ` [PATCH v7 11/19] dt-bindings: usb: sunxi-musb: " Andre Przywara
2021-06-15 11:06 ` Andre Przywara
2021-06-15 11:06 ` Andre Przywara [this message]
2021-06-15 11:06 ` [PATCH v7 12/19] phy: sun4i-usb: Rework HCI PHY (aka. "pmu_unk1") handling Andre Przywara
2021-06-15 11:06 ` Andre Przywara
2021-06-15 11:06 ` [PATCH v7 13/19] phy: sun4i-usb: Allow reset line to be shared Andre Przywara
2021-06-15 11:06 ` Andre Przywara
2021-06-15 11:06 ` Andre Przywara
2021-06-15 11:25 ` Philipp Zabel
2021-06-15 11:25 ` Philipp Zabel
2021-06-15 11:25 ` Philipp Zabel
2021-06-15 11:25 ` Philipp Zabel
2021-06-15 11:06 ` [PATCH v7 14/19] phy: sun4i-usb: Introduce port2 SIDDQ quirk Andre Przywara
2021-06-15 11:06 ` Andre Przywara
2021-06-15 11:06 ` Andre Przywara
2021-06-21 4:36 ` Vinod Koul
2021-06-21 4:36 ` Vinod Koul
2021-06-21 4:36 ` Vinod Koul
2021-06-21 9:14 ` Andre Przywara
2021-06-21 9:14 ` Andre Przywara
2021-06-21 9:14 ` Andre Przywara
2021-06-15 11:06 ` [PATCH v7 15/19] phy: sun4i-usb: Add support for the H616 USB PHY Andre Przywara
2021-06-15 11:06 ` Andre Przywara
2021-06-15 11:06 ` Andre Przywara
2021-07-12 16:50 ` Evgeny Boger
2021-07-12 16:50 ` Evgeny Boger
2021-07-12 16:50 ` Evgeny Boger
2021-06-15 11:06 ` [PATCH v7 16/19] arm64: dts: allwinner: Add Allwinner H616 .dtsi file Andre Przywara
2021-06-15 11:06 ` Andre Przywara
2021-06-16 9:23 ` Maxime Ripard
2021-06-16 9:23 ` Maxime Ripard
2021-06-16 10:06 ` Andre Przywara
2021-06-16 10:06 ` Andre Przywara
2021-06-17 15:42 ` Maxime Ripard
2021-06-17 15:42 ` Maxime Ripard
2021-06-17 15:47 ` Jernej Škrabec
2021-06-17 15:47 ` Jernej Škrabec
2021-06-15 11:06 ` [PATCH v7 17/19] dt-bindings: arm: sunxi: Add two H616 board compatible strings Andre Przywara
2021-06-15 11:06 ` Andre Przywara
2021-06-16 17:38 ` Rob Herring
2021-06-16 17:38 ` Rob Herring
2021-06-15 11:06 ` [PATCH v7 18/19] arm64: dts: allwinner: h616: Add OrangePi Zero 2 board support Andre Przywara
2021-06-15 11:06 ` Andre Przywara
2021-06-15 11:06 ` [PATCH v7 19/19] arm64: dts: allwinner: h616: Add X96 Mate TV box support Andre Przywara
2021-06-15 11:06 ` Andre Przywara
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210615110636.23403-13-andre.przywara@arm.com \
--to=andre.przywara@arm.com \
--cc=icenowy@aosc.io \
--cc=jernej.skrabec@gmail.com \
--cc=kishon@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-phy@lists.infradead.org \
--cc=linux-sunxi@googlegroups.com \
--cc=linux-sunxi@lists.linux.dev \
--cc=linux-usb@vger.kernel.org \
--cc=megous@megous.com \
--cc=mripard@kernel.org \
--cc=robh@kernel.org \
--cc=samuel@sholland.org \
--cc=vkoul@kernel.org \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.