From: Dmitry Osipenko <digetx@gmail.com>
To: Thierry Reding <thierry.reding@gmail.com>,
Jonathan Hunter <jonathanh@nvidia.com>,
Zhang Rui <rui.zhang@intel.com>,
Daniel Lezcano <daniel.lezcano@linaro.org>,
Amit Kucheria <amitk@kernel.org>,
Andreas Westman Dorcsak <hedmoo@yahoo.com>,
Maxim Schwalm <maxim.schwalm@gmail.com>,
Svyatoslav Ryhel <clamor95@gmail.com>,
Ihor Didenko <tailormoon@rambler.ru>,
Ion Agorria <ion@agorria.com>,
Matt Merhar <mattmerhar@protonmail.com>,
Peter Geis <pgwipeout@gmail.com>
Cc: linux-pm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-tegra@vger.kernel.org
Subject: [PATCH v4 0/6] Add driver for NVIDIA Tegra30 SoC Thermal sensor
Date: Wed, 16 Jun 2021 22:04:11 +0300 [thread overview]
Message-ID: <20210616190417.32214-1-digetx@gmail.com> (raw)
Hi,
This series adds support for the thermal sensor that is found on NVIDIA
Tegra30 SoC. Sensor monitors temperature and voltage of the SoC, it also
emits signals to the power management and clock controllers that are
performing the emergency shut down and the CPU frequency throttling
when a pre-programmed temperature levels are reached.
Changelog:
v4: - Removed DIV2 CPU frequency throttling and cooling device part as was
suggested by Daniel Lezcano since we need to notify cpufreq about the
updated frequency and change the thermal pressure. The thermal pressure
change should co-exists with the cpufreq_cooling. This all needs some
more thought, so the DIV2 mitigation will come sometime later.
- Added ack from Thierry Reding.
- Changed default TZ trips in the device-tree to the silicon temperature
levels, instead of the average device levels.
v3: - No code changes. CC'ed linux-pm, which was previously missed by accident.
Not sure how much that is important for the thermal patches, but won't
hurt to re-send since only DT binding was reviewed so far.
v2: - Made a very minor improvement to one error message, it now prints
number of channel at which error occurred.
- Added r-b from Rob Herring to the binding.
Dmitry Osipenko (6):
dt-bindings: thermal: Add binding for Tegra30 thermal sensor
thermal: thermal_of: Stop zone device before unregistering it
thermal/drivers/tegra: Add driver for Tegra30 thermal sensor
ARM: tegra_defconfig: Enable CONFIG_TEGRA30_TSENSOR
ARM: multi_v7_defconfig: Enable CONFIG_TEGRA30_TSENSOR
ARM: tegra: Add SoC thermal sensor to Tegra30 device-trees
.../thermal/nvidia,tegra30-tsensor.yaml | 73 ++
arch/arm/boot/dts/tegra30.dtsi | 87 ++-
arch/arm/configs/multi_v7_defconfig | 1 +
arch/arm/configs/tegra_defconfig | 1 +
drivers/thermal/tegra/Kconfig | 7 +
drivers/thermal/tegra/Makefile | 1 +
drivers/thermal/tegra/tegra30-tsensor.c | 673 ++++++++++++++++++
drivers/thermal/thermal_of.c | 3 +
8 files changed, 842 insertions(+), 4 deletions(-)
create mode 100644 Documentation/devicetree/bindings/thermal/nvidia,tegra30-tsensor.yaml
create mode 100644 drivers/thermal/tegra/tegra30-tsensor.c
--
2.30.2
next reply other threads:[~2021-06-16 19:05 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-16 19:04 Dmitry Osipenko [this message]
2021-06-16 19:04 ` [PATCH v4 1/6] dt-bindings: thermal: Add binding for Tegra30 thermal sensor Dmitry Osipenko
2021-06-21 9:46 ` [thermal: thermal/next] " thermal-bot for Dmitry Osipenko
2021-07-04 18:02 ` thermal-bot for Dmitry Osipenko
2021-06-16 19:04 ` [PATCH v4 2/6] thermal: thermal_of: Stop zone device before unregistering it Dmitry Osipenko
2021-06-21 9:46 ` [thermal: thermal/next] thermal/core/thermal_of: " thermal-bot for Dmitry Osipenko
2021-07-04 18:02 ` thermal-bot for Dmitry Osipenko
2021-06-16 19:04 ` [PATCH v4 3/6] thermal/drivers/tegra: Add driver for Tegra30 thermal sensor Dmitry Osipenko
2021-06-21 9:46 ` [thermal: thermal/next] " thermal-bot for Dmitry Osipenko
2021-09-09 14:38 ` thermal-bot for Dmitry Osipenko
2021-06-16 19:04 ` [PATCH v4 4/6] ARM: tegra_defconfig: Enable CONFIG_TEGRA30_TSENSOR Dmitry Osipenko
2021-06-16 19:04 ` [PATCH v4 5/6] ARM: multi_v7_defconfig: " Dmitry Osipenko
2021-06-16 19:04 ` [PATCH v4 6/6] ARM: tegra: Add SoC thermal sensor to Tegra30 device-trees Dmitry Osipenko
2021-06-21 17:13 ` [PATCH v4 0/6] Add driver for NVIDIA Tegra30 SoC Thermal sensor Daniel Lezcano
2021-06-21 17:26 ` Dmitry Osipenko
2021-06-21 18:16 ` Daniel Lezcano
2021-06-21 18:25 ` Dmitry Osipenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210616190417.32214-1-digetx@gmail.com \
--to=digetx@gmail.com \
--cc=amitk@kernel.org \
--cc=clamor95@gmail.com \
--cc=daniel.lezcano@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=hedmoo@yahoo.com \
--cc=ion@agorria.com \
--cc=jonathanh@nvidia.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=mattmerhar@protonmail.com \
--cc=maxim.schwalm@gmail.com \
--cc=pgwipeout@gmail.com \
--cc=rui.zhang@intel.com \
--cc=tailormoon@rambler.ru \
--cc=thierry.reding@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.