From: Mikko Perttunen <mperttunen@nvidia.com> To: thierry.reding@gmail.com, jonathanh@nvidia.com Cc: linux-tegra@vger.kernel.org, linux-arm-kernel@lists.infradead.org, Mikko Perttunen <mperttunen@nvidia.com> Subject: [PATCH v2] soc: tegra: Add Tegra186 ARI driver Date: Thu, 17 Jun 2021 15:13:07 +0300 [thread overview] Message-ID: <20210617121307.792386-1-mperttunen@nvidia.com> (raw) Add a driver to hook into panic notifiers and print machine check status for debugging. Status information is retrieved via SMC. This is supported by upstream ARM Trusted Firmware. Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> --- v2: * Changed to use panic notifier instead of serror hook --- drivers/soc/tegra/Makefile | 1 + drivers/soc/tegra/ari-tegra186.c | 80 ++++++++++++++++++++++++++++++++ 2 files changed, 81 insertions(+) create mode 100644 drivers/soc/tegra/ari-tegra186.c diff --git a/drivers/soc/tegra/Makefile b/drivers/soc/tegra/Makefile index 9c809c1814bd..054e862b63d8 100644 --- a/drivers/soc/tegra/Makefile +++ b/drivers/soc/tegra/Makefile @@ -7,3 +7,4 @@ obj-$(CONFIG_SOC_TEGRA_PMC) += pmc.o obj-$(CONFIG_SOC_TEGRA_POWERGATE_BPMP) += powergate-bpmp.o obj-$(CONFIG_SOC_TEGRA20_VOLTAGE_COUPLER) += regulators-tegra20.o obj-$(CONFIG_SOC_TEGRA30_VOLTAGE_COUPLER) += regulators-tegra30.o +obj-$(CONFIG_ARCH_TEGRA_186_SOC) += ari-tegra186.o diff --git a/drivers/soc/tegra/ari-tegra186.c b/drivers/soc/tegra/ari-tegra186.c new file mode 100644 index 000000000000..02577853ec49 --- /dev/null +++ b/drivers/soc/tegra/ari-tegra186.c @@ -0,0 +1,80 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2021, NVIDIA CORPORATION. All rights reserved. + */ + +#include <linux/arm-smccc.h> +#include <linux/kernel.h> +#include <linux/of.h> +#include <linux/panic_notifier.h> + +#define SMC_SIP_INVOKE_MCE 0xc2ffff00 +#define MCE_SMC_READ_MCA 12 + +#define MCA_ARI_CMD_RD_SERR 1 + +#define MCA_ARI_RW_SUBIDX_STAT 1 +#define SERR_STATUS_VAL BIT_ULL(63) + +#define MCA_ARI_RW_SUBIDX_ADDR 2 +#define MCA_ARI_RW_SUBIDX_MSC1 3 +#define MCA_ARI_RW_SUBIDX_MSC2 4 + +static const char * const bank_names[] = { + "SYS:DPMU", "ROC:IOB", "ROC:MCB", "ROC:CCE", "ROC:CQX", "ROC:CTU", +}; + +static void read_uncore_mca(u8 cmd, u8 idx, u8 subidx, u8 inst, u64 *data) +{ + struct arm_smccc_res res; + + arm_smccc_smc(SMC_SIP_INVOKE_MCE | MCE_SMC_READ_MCA, + ((u64)inst << 24) | ((u64)idx << 16) | + ((u64)subidx << 8) | ((u64)cmd << 0), + 0, 0, 0, 0, 0, 0, &res); + + *data = res.a2; +} + +static int tegra186_ari_panic_handler(struct notifier_block *nb, + unsigned long code, void *unused) +{ + u64 status; + int i; + + for (i = 0; i < ARRAY_SIZE(bank_names); i++) { + read_uncore_mca(MCA_ARI_CMD_RD_SERR, i, MCA_ARI_RW_SUBIDX_STAT, + 0, &status); + + if (status & SERR_STATUS_VAL) { + u64 addr, misc1, misc2; + + read_uncore_mca(MCA_ARI_CMD_RD_SERR, i, + MCA_ARI_RW_SUBIDX_ADDR, 0, &addr); + read_uncore_mca(MCA_ARI_CMD_RD_SERR, i, + MCA_ARI_RW_SUBIDX_MSC1, 0, &misc1); + read_uncore_mca(MCA_ARI_CMD_RD_SERR, i, + MCA_ARI_RW_SUBIDX_MSC2, 0, &misc2); + + pr_crit("Machine Check Error in %s\n" + " status=0x%llx addr=0x%llx\n" + " msc1=0x%llx msc2=0x%llx\n", + bank_names[i], status, addr, misc1, misc2); + } + } + + return NOTIFY_DONE; +} + +static struct notifier_block tegra186_ari_panic_nb = { + .notifier_call = tegra186_ari_panic_handler, +}; + +static int __init tegra186_ari_init(void) +{ + if (of_machine_is_compatible("nvidia,tegra186")) + atomic_notifier_chain_register(&panic_notifier_list, &tegra186_ari_panic_nb); + + return 0; +} +early_initcall(tegra186_ari_init); -- 2.30.1
WARNING: multiple messages have this Message-ID (diff)
From: Mikko Perttunen <mperttunen@nvidia.com> To: thierry.reding@gmail.com, jonathanh@nvidia.com Cc: linux-tegra@vger.kernel.org, linux-arm-kernel@lists.infradead.org, Mikko Perttunen <mperttunen@nvidia.com> Subject: [PATCH v2] soc: tegra: Add Tegra186 ARI driver Date: Thu, 17 Jun 2021 15:13:07 +0300 [thread overview] Message-ID: <20210617121307.792386-1-mperttunen@nvidia.com> (raw) Add a driver to hook into panic notifiers and print machine check status for debugging. Status information is retrieved via SMC. This is supported by upstream ARM Trusted Firmware. Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> --- v2: * Changed to use panic notifier instead of serror hook --- drivers/soc/tegra/Makefile | 1 + drivers/soc/tegra/ari-tegra186.c | 80 ++++++++++++++++++++++++++++++++ 2 files changed, 81 insertions(+) create mode 100644 drivers/soc/tegra/ari-tegra186.c diff --git a/drivers/soc/tegra/Makefile b/drivers/soc/tegra/Makefile index 9c809c1814bd..054e862b63d8 100644 --- a/drivers/soc/tegra/Makefile +++ b/drivers/soc/tegra/Makefile @@ -7,3 +7,4 @@ obj-$(CONFIG_SOC_TEGRA_PMC) += pmc.o obj-$(CONFIG_SOC_TEGRA_POWERGATE_BPMP) += powergate-bpmp.o obj-$(CONFIG_SOC_TEGRA20_VOLTAGE_COUPLER) += regulators-tegra20.o obj-$(CONFIG_SOC_TEGRA30_VOLTAGE_COUPLER) += regulators-tegra30.o +obj-$(CONFIG_ARCH_TEGRA_186_SOC) += ari-tegra186.o diff --git a/drivers/soc/tegra/ari-tegra186.c b/drivers/soc/tegra/ari-tegra186.c new file mode 100644 index 000000000000..02577853ec49 --- /dev/null +++ b/drivers/soc/tegra/ari-tegra186.c @@ -0,0 +1,80 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2021, NVIDIA CORPORATION. All rights reserved. + */ + +#include <linux/arm-smccc.h> +#include <linux/kernel.h> +#include <linux/of.h> +#include <linux/panic_notifier.h> + +#define SMC_SIP_INVOKE_MCE 0xc2ffff00 +#define MCE_SMC_READ_MCA 12 + +#define MCA_ARI_CMD_RD_SERR 1 + +#define MCA_ARI_RW_SUBIDX_STAT 1 +#define SERR_STATUS_VAL BIT_ULL(63) + +#define MCA_ARI_RW_SUBIDX_ADDR 2 +#define MCA_ARI_RW_SUBIDX_MSC1 3 +#define MCA_ARI_RW_SUBIDX_MSC2 4 + +static const char * const bank_names[] = { + "SYS:DPMU", "ROC:IOB", "ROC:MCB", "ROC:CCE", "ROC:CQX", "ROC:CTU", +}; + +static void read_uncore_mca(u8 cmd, u8 idx, u8 subidx, u8 inst, u64 *data) +{ + struct arm_smccc_res res; + + arm_smccc_smc(SMC_SIP_INVOKE_MCE | MCE_SMC_READ_MCA, + ((u64)inst << 24) | ((u64)idx << 16) | + ((u64)subidx << 8) | ((u64)cmd << 0), + 0, 0, 0, 0, 0, 0, &res); + + *data = res.a2; +} + +static int tegra186_ari_panic_handler(struct notifier_block *nb, + unsigned long code, void *unused) +{ + u64 status; + int i; + + for (i = 0; i < ARRAY_SIZE(bank_names); i++) { + read_uncore_mca(MCA_ARI_CMD_RD_SERR, i, MCA_ARI_RW_SUBIDX_STAT, + 0, &status); + + if (status & SERR_STATUS_VAL) { + u64 addr, misc1, misc2; + + read_uncore_mca(MCA_ARI_CMD_RD_SERR, i, + MCA_ARI_RW_SUBIDX_ADDR, 0, &addr); + read_uncore_mca(MCA_ARI_CMD_RD_SERR, i, + MCA_ARI_RW_SUBIDX_MSC1, 0, &misc1); + read_uncore_mca(MCA_ARI_CMD_RD_SERR, i, + MCA_ARI_RW_SUBIDX_MSC2, 0, &misc2); + + pr_crit("Machine Check Error in %s\n" + " status=0x%llx addr=0x%llx\n" + " msc1=0x%llx msc2=0x%llx\n", + bank_names[i], status, addr, misc1, misc2); + } + } + + return NOTIFY_DONE; +} + +static struct notifier_block tegra186_ari_panic_nb = { + .notifier_call = tegra186_ari_panic_handler, +}; + +static int __init tegra186_ari_init(void) +{ + if (of_machine_is_compatible("nvidia,tegra186")) + atomic_notifier_chain_register(&panic_notifier_list, &tegra186_ari_panic_nb); + + return 0; +} +early_initcall(tegra186_ari_init); -- 2.30.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2021-06-17 12:13 UTC|newest] Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-06-17 12:13 Mikko Perttunen [this message] 2021-06-17 12:13 ` [PATCH v2] soc: tegra: Add Tegra186 ARI driver Mikko Perttunen 2021-06-18 12:03 ` Thierry Reding 2021-06-18 12:03 ` Thierry Reding 2021-06-18 12:32 ` Mikko Perttunen 2021-06-18 12:32 ` Mikko Perttunen 2021-10-07 18:47 ` Thierry Reding 2021-10-07 18:47 ` Thierry Reding
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20210617121307.792386-1-mperttunen@nvidia.com \ --to=mperttunen@nvidia.com \ --cc=jonathanh@nvidia.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-tegra@vger.kernel.org \ --cc=thierry.reding@gmail.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.