From: Jacky Bai <ping.bai@nxp.com> To: robh+dt@kernel.org, shawnguo@kernel.org, sboyd@kernel.org, s.hauer@pengutronix.de, linus.walleij@linaro.org, aisheng.dong@nxp.com Cc: festevam@gmail.com, kernel@pengutronix.de, linux-imx@nxp.com, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org Subject: [PATCH v2 00/11] Add imx8ulp basic dtsi support Date: Fri, 18 Jun 2021 14:54:12 +0800 [thread overview] Message-ID: <20210618065423.3424938-1-ping.bai@nxp.com> (raw) i.MX 8ULP is part of the ULP family with emphasis on extreme low-power techniques using the 28 nm fully depleted silicon on insulator process. Like i.MX 7ULP, i.MX 8ULP continues to be based on asymmetric architecture, however will add a third DSP domain for advanced voice/audio capability and a Graphics domain where it is possible to access graphics resources from the application side or the realtime side. This patchset adds the basic dtsi support for i.MX8ULP, and also update the dt-bindings docs for i.MX8ULP. Jacky Bai (11): dt-bindings: gpio: gpio-vf610: Add imx8ulp compatible string dt-bindings: i2c: imx-lpi2c: Add imx8ulp compatible string dt-bindings: mmc: imx-esdhc: Add imx8ulp compatible string dt-bindings: serial: fsl-lpuart: Add imx8ulp compatible string dt-bindings: spi: fsl-lpspi: Add imx8ulp compatible string dt-bindings: timer: tpm-timer: Add imx8ulp compatible string dt-bindings: watchdog: imx7ulp-wdt: Add imx8ulp compatible string dt-bindings: arm: fsl: Add binding for imx8ulp evk dt-bindings: clock: Add imx8ulp clock support arm64: dts: imx8ulp: Add the basic dtsi file for imx8ulp arm64: dts: imx8ulp: Add the basic dts for imx8ulp evk board .../devicetree/bindings/arm/fsl.yaml | 6 + .../bindings/clock/imx8ulp-clock.yaml | 72 ++ .../devicetree/bindings/gpio/gpio-vf610.yaml | 3 + .../bindings/i2c/i2c-imx-lpi2c.yaml | 4 +- .../bindings/mmc/fsl-imx-esdhc.yaml | 4 + .../bindings/serial/fsl-lpuart.yaml | 4 +- .../bindings/spi/spi-fsl-lpspi.yaml | 11 +- .../bindings/timer/nxp,tpm-timer.yaml | 6 +- .../bindings/watchdog/fsl-imx7ulp-wdt.yaml | 7 +- arch/arm64/boot/dts/freescale/Makefile | 1 + arch/arm64/boot/dts/freescale/imx8ulp-evk.dts | 148 +++ .../boot/dts/freescale/imx8ulp-pinfunc.h | 978 ++++++++++++++++++ arch/arm64/boot/dts/freescale/imx8ulp.dtsi | 474 +++++++++ include/dt-bindings/clock/imx8ulp-clock.h | 261 +++++ 14 files changed, 1970 insertions(+), 9 deletions(-) create mode 100644 Documentation/devicetree/bindings/clock/imx8ulp-clock.yaml create mode 100644 arch/arm64/boot/dts/freescale/imx8ulp-evk.dts create mode 100755 arch/arm64/boot/dts/freescale/imx8ulp-pinfunc.h create mode 100644 arch/arm64/boot/dts/freescale/imx8ulp.dtsi create mode 100644 include/dt-bindings/clock/imx8ulp-clock.h -- 2.26.2
WARNING: multiple messages have this Message-ID (diff)
From: Jacky Bai <ping.bai@nxp.com> To: robh+dt@kernel.org, shawnguo@kernel.org, sboyd@kernel.org, s.hauer@pengutronix.de, linus.walleij@linaro.org, aisheng.dong@nxp.com Cc: festevam@gmail.com, kernel@pengutronix.de, linux-imx@nxp.com, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org Subject: [PATCH v2 00/11] Add imx8ulp basic dtsi support Date: Fri, 18 Jun 2021 14:54:12 +0800 [thread overview] Message-ID: <20210618065423.3424938-1-ping.bai@nxp.com> (raw) i.MX 8ULP is part of the ULP family with emphasis on extreme low-power techniques using the 28 nm fully depleted silicon on insulator process. Like i.MX 7ULP, i.MX 8ULP continues to be based on asymmetric architecture, however will add a third DSP domain for advanced voice/audio capability and a Graphics domain where it is possible to access graphics resources from the application side or the realtime side. This patchset adds the basic dtsi support for i.MX8ULP, and also update the dt-bindings docs for i.MX8ULP. Jacky Bai (11): dt-bindings: gpio: gpio-vf610: Add imx8ulp compatible string dt-bindings: i2c: imx-lpi2c: Add imx8ulp compatible string dt-bindings: mmc: imx-esdhc: Add imx8ulp compatible string dt-bindings: serial: fsl-lpuart: Add imx8ulp compatible string dt-bindings: spi: fsl-lpspi: Add imx8ulp compatible string dt-bindings: timer: tpm-timer: Add imx8ulp compatible string dt-bindings: watchdog: imx7ulp-wdt: Add imx8ulp compatible string dt-bindings: arm: fsl: Add binding for imx8ulp evk dt-bindings: clock: Add imx8ulp clock support arm64: dts: imx8ulp: Add the basic dtsi file for imx8ulp arm64: dts: imx8ulp: Add the basic dts for imx8ulp evk board .../devicetree/bindings/arm/fsl.yaml | 6 + .../bindings/clock/imx8ulp-clock.yaml | 72 ++ .../devicetree/bindings/gpio/gpio-vf610.yaml | 3 + .../bindings/i2c/i2c-imx-lpi2c.yaml | 4 +- .../bindings/mmc/fsl-imx-esdhc.yaml | 4 + .../bindings/serial/fsl-lpuart.yaml | 4 +- .../bindings/spi/spi-fsl-lpspi.yaml | 11 +- .../bindings/timer/nxp,tpm-timer.yaml | 6 +- .../bindings/watchdog/fsl-imx7ulp-wdt.yaml | 7 +- arch/arm64/boot/dts/freescale/Makefile | 1 + arch/arm64/boot/dts/freescale/imx8ulp-evk.dts | 148 +++ .../boot/dts/freescale/imx8ulp-pinfunc.h | 978 ++++++++++++++++++ arch/arm64/boot/dts/freescale/imx8ulp.dtsi | 474 +++++++++ include/dt-bindings/clock/imx8ulp-clock.h | 261 +++++ 14 files changed, 1970 insertions(+), 9 deletions(-) create mode 100644 Documentation/devicetree/bindings/clock/imx8ulp-clock.yaml create mode 100644 arch/arm64/boot/dts/freescale/imx8ulp-evk.dts create mode 100755 arch/arm64/boot/dts/freescale/imx8ulp-pinfunc.h create mode 100644 arch/arm64/boot/dts/freescale/imx8ulp.dtsi create mode 100644 include/dt-bindings/clock/imx8ulp-clock.h -- 2.26.2 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2021-06-18 6:44 UTC|newest] Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-06-18 6:54 Jacky Bai [this message] 2021-06-18 6:54 ` [PATCH v2 00/11] Add imx8ulp basic dtsi support Jacky Bai 2021-06-18 6:54 ` [PATCH v2 01/11] dt-bindings: gpio: gpio-vf610: Add imx8ulp compatible string Jacky Bai 2021-06-18 6:54 ` Jacky Bai 2021-06-18 6:54 ` [PATCH v2 02/11] dt-bindings: i2c: imx-lpi2c: " Jacky Bai 2021-06-18 6:54 ` Jacky Bai 2021-06-18 6:54 ` [PATCH v2 03/11] dt-bindings: mmc: imx-esdhc: " Jacky Bai 2021-06-18 6:54 ` Jacky Bai 2021-06-18 6:54 ` [PATCH v2 04/11] dt-bindings: serial: fsl-lpuart: " Jacky Bai 2021-06-18 6:54 ` Jacky Bai 2021-06-18 6:54 ` [PATCH v2 05/11] dt-bindings: spi: fsl-lpspi: " Jacky Bai 2021-06-18 6:54 ` Jacky Bai 2021-06-18 6:54 ` [PATCH v2 06/11] dt-bindings: timer: tpm-timer: " Jacky Bai 2021-06-18 6:54 ` Jacky Bai 2021-06-18 6:54 ` [PATCH v2 07/11] dt-bindings: watchdog: imx7ulp-wdt: " Jacky Bai 2021-06-18 6:54 ` Jacky Bai 2021-06-18 6:54 ` [PATCH v2 08/11] dt-bindings: arm: fsl: Add binding for imx8ulp evk Jacky Bai 2021-06-18 6:54 ` Jacky Bai 2021-06-18 6:54 ` [PATCH v2 09/11] dt-bindings: clock: Add imx8ulp clock support Jacky Bai 2021-06-18 6:54 ` Jacky Bai 2021-06-24 21:36 ` Rob Herring 2021-06-24 21:36 ` Rob Herring 2021-06-25 0:30 ` Jacky Bai 2021-06-25 0:30 ` Jacky Bai 2021-06-18 6:54 ` [PATCH v2 10/11] arm64: dts: imx8ulp: Add the basic dtsi file for imx8ulp Jacky Bai 2021-06-18 6:54 ` [PATCH v2 11/11] arm64: dts: imx8ulp: Add the basic dts for imx8ulp evk board Jacky Bai 2021-06-18 6:54 ` Jacky Bai
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20210618065423.3424938-1-ping.bai@nxp.com \ --to=ping.bai@nxp.com \ --cc=aisheng.dong@nxp.com \ --cc=devicetree@vger.kernel.org \ --cc=festevam@gmail.com \ --cc=kernel@pengutronix.de \ --cc=linus.walleij@linaro.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-imx@nxp.com \ --cc=robh+dt@kernel.org \ --cc=s.hauer@pengutronix.de \ --cc=sboyd@kernel.org \ --cc=shawnguo@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.