All of lore.kernel.org
 help / color / mirror / Atom feed
From: Vinod Koul <vkoul@kernel.org>
To: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: linux-arm-msm@vger.kernel.org, Vinod Koul <vkoul@kernel.org>,
	Andy Gross <agross@kernel.org>,
	Matthias Kaehlcke <mka@chromium.org>,
	Douglas Anderson <dianders@chromium.org>,
	Sumit Semwal <sumit.semwal@linaro.org>,
	linux-kernel@vger.kernel.org
Subject: [PATCH v2 3/3] soc: qcom: geni: Add support for gpi dma
Date: Fri, 18 Jun 2021 19:48:39 +0530	[thread overview]
Message-ID: <20210618141839.3777270-4-vkoul@kernel.org> (raw)
In-Reply-To: <20210618141839.3777270-1-vkoul@kernel.org>

GPI DMA is one of the DMA modes supported on geni, this adds support to
enable that mode

Signed-off-by: Vinod Koul <vkoul@kernel.org>
---
 drivers/soc/qcom/qcom-geni-se.c | 32 +++++++++++++++++++++++++++++++-
 include/linux/qcom-geni-se.h    |  5 +++--
 2 files changed, 34 insertions(+), 3 deletions(-)

diff --git a/drivers/soc/qcom/qcom-geni-se.c b/drivers/soc/qcom/qcom-geni-se.c
index 08d645b90ed3..40a0a1f88070 100644
--- a/drivers/soc/qcom/qcom-geni-se.c
+++ b/drivers/soc/qcom/qcom-geni-se.c
@@ -307,6 +307,32 @@ static void geni_se_select_dma_mode(struct geni_se *se)
 		writel_relaxed(val, se->base + SE_GENI_DMA_MODE_EN);
 }
 
+static void geni_se_select_gpi_mode(struct geni_se *se)
+{
+	unsigned int gpi_event_en;
+	unsigned int m_irq_en;
+	unsigned int s_irq_en;
+
+	geni_se_irq_clear(se);
+	writel(0, se->base + SE_IRQ_EN);
+
+	s_irq_en = readl_relaxed(se->base + SE_GENI_S_IRQ_EN);
+	s_irq_en &= ~S_CMD_DONE_EN;
+	writel(s_irq_en, se->base + SE_GENI_S_IRQ_EN);
+
+	m_irq_en = readl(se->base + SE_GENI_M_IRQ_EN);
+	m_irq_en &= ~(M_CMD_DONE_EN | M_TX_FIFO_WATERMARK_EN |
+		      M_RX_FIFO_WATERMARK_EN | M_RX_FIFO_LAST_EN);
+	writel(m_irq_en, se->base + SE_GENI_M_IRQ_EN);
+
+	writel(GENI_DMA_MODE_EN, se->base + SE_GENI_DMA_MODE_EN);
+
+	gpi_event_en = readl(se->base + SE_GSI_EVENT_EN);
+	gpi_event_en |= (DMA_RX_EVENT_EN | DMA_TX_EVENT_EN |
+			 GENI_M_EVENT_EN | GENI_S_EVENT_EN);
+	writel(gpi_event_en, se->base + SE_GSI_EVENT_EN);
+}
+
 /**
  * geni_se_select_mode() - Select the serial engine transfer mode
  * @se:		Pointer to the concerned serial engine.
@@ -314,7 +340,8 @@ static void geni_se_select_dma_mode(struct geni_se *se)
  */
 void geni_se_select_mode(struct geni_se *se, enum geni_se_xfer_mode mode)
 {
-	WARN_ON(mode != GENI_SE_FIFO && mode != GENI_SE_DMA);
+	WARN_ON(mode != GENI_SE_FIFO && mode != GENI_SE_DMA &&
+		mode != GENI_GPI_DMA);
 
 	switch (mode) {
 	case GENI_SE_FIFO:
@@ -323,6 +350,9 @@ void geni_se_select_mode(struct geni_se *se, enum geni_se_xfer_mode mode)
 	case GENI_SE_DMA:
 		geni_se_select_dma_mode(se);
 		break;
+	case GENI_GPI_DMA:
+		geni_se_select_gpi_mode(se);
+		break;
 	case GENI_SE_INVALID:
 	default:
 		break;
diff --git a/include/linux/qcom-geni-se.h b/include/linux/qcom-geni-se.h
index 5fda675c5cfe..336b682392b1 100644
--- a/include/linux/qcom-geni-se.h
+++ b/include/linux/qcom-geni-se.h
@@ -11,8 +11,9 @@
 /* Transfer mode supported by GENI Serial Engines */
 enum geni_se_xfer_mode {
 	GENI_SE_INVALID,
-	GENI_SE_FIFO,
-	GENI_SE_DMA,
+	GENI_SE_FIFO, /* FIFO mode */
+	GENI_GPI_DMA, /* GSI aka GPI DMA mode */
+	GENI_SE_DMA,  /* SE DMA mode */
 };
 
 /* Protocols supported by GENI Serial Engines */
-- 
2.31.1


  parent reply	other threads:[~2021-06-18 14:19 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-06-18 14:18 [PATCH v2 0/3] soc: qcom: geni: add support for gpi dma Vinod Koul
2021-06-18 14:18 ` [PATCH v2 1/3] soc: qcom: geni: move GENI_IF_DISABLE_RO to common header Vinod Koul
2021-06-18 17:03   ` Bjorn Andersson
2021-06-22 12:13     ` Vinod Koul
2021-06-18 14:18 ` [PATCH v2 2/3] soc: qcom: geni: move struct geni_wrapper to header Vinod Koul
2021-06-18 17:10   ` Bjorn Andersson
2021-06-18 14:18 ` Vinod Koul [this message]
2021-06-18 17:23   ` [PATCH v2 3/3] soc: qcom: geni: Add support for gpi dma Bjorn Andersson
2021-06-22 12:15     ` Vinod Koul
2021-06-18 16:59 ` [PATCH v2 0/3] soc: qcom: geni: add " Bjorn Andersson
2021-06-20 11:06   ` Vinod Koul

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210618141839.3777270-4-vkoul@kernel.org \
    --to=vkoul@kernel.org \
    --cc=agross@kernel.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=dianders@chromium.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mka@chromium.org \
    --cc=sumit.semwal@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.