All of lore.kernel.org
 help / color / mirror / Atom feed
From: Antoine Tenart <atenart@kernel.org>
To: davem@davemloft.net, kuba@kernel.org, dsahern@kernel.org
Cc: Antoine Tenart <atenart@kernel.org>,
	netdev@vger.kernel.org, Stephen Suryaputra <ssuryaextr@gmail.com>,
	Paolo Abeni <pabeni@redhat.com>
Subject: [PATCH net] vrf: do not push non-ND strict packets with a source LLA through packet taps again
Date: Fri, 18 Jun 2021 17:15:53 +0200	[thread overview]
Message-ID: <20210618151553.59456-1-atenart@kernel.org> (raw)

Non-ND strict packets with a source LLA go through the packet taps
again, while non-ND strict packets with other source addresses do not,
and we can see a clone of those packets on the vrf interface (we should
not). This is due to a series of changes:

Commit 6f12fa775530[1] made non-ND strict packets not being pushed again
in the packet taps. This changed with commit 205704c618af[2] for those
packets having a source LLA, as they need a lookup with the orig_iif.

The issue now is those packets do not skip the 'vrf_ip6_rcv' function to
the end (as the ones without a source LLA) and go through the check to
call packet taps again. This check was changed by commit 6f12fa775530[1]
and do not exclude non-strict packets anymore. Packets matching
'need_strict && !is_ndisc && is_ll_src' are now being sent through the
packet taps again. This can be seen by dumping packets on the vrf
interface.

Fix this by having the same code path for all non-ND strict packets and
selectively lookup with the orig_iif for those with a source LLA. This
has the effect to revert to the pre-205704c618af[2] condition, which
should also be easier to maintain.

[1] 6f12fa775530 ("vrf: mark skb for multicast or link-local as enslaved to VRF")
[2] 205704c618af ("vrf: packets with lladdr src needs dst at input with orig_iif when needs strict")

Fixes: 205704c618af ("vrf: packets with lladdr src needs dst at input with orig_iif when needs strict")
Cc: Stephen Suryaputra <ssuryaextr@gmail.com>
Reported-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Antoine Tenart <atenart@kernel.org>
---
 drivers/net/vrf.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/net/vrf.c b/drivers/net/vrf.c
index 28a6c4cfe9b8..414afcb0a23f 100644
--- a/drivers/net/vrf.c
+++ b/drivers/net/vrf.c
@@ -1366,22 +1366,22 @@ static struct sk_buff *vrf_ip6_rcv(struct net_device *vrf_dev,
 	int orig_iif = skb->skb_iif;
 	bool need_strict = rt6_need_strict(&ipv6_hdr(skb)->daddr);
 	bool is_ndisc = ipv6_ndisc_frame(skb);
-	bool is_ll_src;
 
 	/* loopback, multicast & non-ND link-local traffic; do not push through
 	 * packet taps again. Reset pkt_type for upper layers to process skb.
-	 * for packets with lladdr src, however, skip so that the dst can be
-	 * determine at input using original ifindex in the case that daddr
-	 * needs strict
+	 * For strict packets with a source LLA, determine the dst using the
+	 * original ifindex.
 	 */
-	is_ll_src = ipv6_addr_type(&ipv6_hdr(skb)->saddr) & IPV6_ADDR_LINKLOCAL;
-	if (skb->pkt_type == PACKET_LOOPBACK ||
-	    (need_strict && !is_ndisc && !is_ll_src)) {
+	if (skb->pkt_type == PACKET_LOOPBACK || (need_strict && !is_ndisc)) {
 		skb->dev = vrf_dev;
 		skb->skb_iif = vrf_dev->ifindex;
 		IP6CB(skb)->flags |= IP6SKB_L3SLAVE;
+
 		if (skb->pkt_type == PACKET_LOOPBACK)
 			skb->pkt_type = PACKET_HOST;
+		else if (ipv6_addr_type(&ipv6_hdr(skb)->saddr) & IPV6_ADDR_LINKLOCAL)
+			vrf_ip6_input_dst(skb, vrf_dev, orig_iif);
+
 		goto out;
 	}
 
-- 
2.31.1


             reply	other threads:[~2021-06-18 15:15 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-06-18 15:15 Antoine Tenart [this message]
2021-06-19  1:18 ` [PATCH net] vrf: do not push non-ND strict packets with a source LLA through packet taps again David Ahern
2021-06-20 12:12   ` Antoine Tenart
2021-06-21  3:20     ` David Ahern
2021-06-21 19:00 ` patchwork-bot+netdevbpf

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210618151553.59456-1-atenart@kernel.org \
    --to=atenart@kernel.org \
    --cc=davem@davemloft.net \
    --cc=dsahern@kernel.org \
    --cc=kuba@kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=ssuryaextr@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.