All of lore.kernel.org
 help / color / mirror / Atom feed
From: Brian Foster <bfoster@redhat.com>
To: linux-xfs@vger.kernel.org
Subject: [PATCH v2 1/2] xfs: hold buffer across unpin and potential shutdown processing
Date: Mon, 21 Jun 2021 09:16:43 -0400	[thread overview]
Message-ID: <20210621131644.128177-2-bfoster@redhat.com> (raw)
In-Reply-To: <20210621131644.128177-1-bfoster@redhat.com>

The special processing used to simulate a buffer I/O failure on fs
shutdown has a difficult to reproduce race that can result in a use
after free of the associated buffer. Consider a buffer that has been
committed to the on-disk log and thus is AIL resident. The buffer
lands on the writeback delwri queue, but is subsequently locked,
committed and pinned by another transaction before submitted for
I/O. At this point, the buffer is stuck on the delwri queue as it
cannot be submitted for I/O until it is unpinned. A log checkpoint
I/O failure occurs sometime later, which aborts the bli. The unpin
handler is called with the aborted log item, drops the bli reference
count, the pin count, and falls into the I/O failure simulation
path.

The potential problem here is that once the pin count falls to zero
in ->iop_unpin(), xfsaild is free to retry delwri submission of the
buffer at any time, before the unpin handler even completes. If
delwri queue submission wins the race to the buffer lock, it
observes the shutdown state and simulates the I/O failure itself.
This releases both the bli and delwri queue holds and frees the
buffer while xfs_buf_item_unpin() sits on xfs_buf_lock() waiting to
run through the same failure sequence. This problem is rare and
requires many iterations of fstest generic/019 (which simulates disk
I/O failures) to reproduce.

To avoid this problem, grab a hold on the buffer before the log item
is unpinned if the associated item has been aborted and will require
a simulated I/O failure. The hold is already required for the
simulated I/O failure, so the ordering simply guarantees the unpin
handler access to the buffer before it is unpinned and thus
processed by the AIL. This particular ordering is required so long
as the AIL does not acquire a reference on the bli, which is the
long term solution to this problem.

Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
---
 fs/xfs/xfs_buf_item.c | 37 +++++++++++++++++++++----------------
 1 file changed, 21 insertions(+), 16 deletions(-)

diff --git a/fs/xfs/xfs_buf_item.c b/fs/xfs/xfs_buf_item.c
index 1cb087b320b1..464587c5a2cb 100644
--- a/fs/xfs/xfs_buf_item.c
+++ b/fs/xfs/xfs_buf_item.c
@@ -474,17 +474,8 @@ xfs_buf_item_pin(
 }
 
 /*
- * This is called to unpin the buffer associated with the buf log
- * item which was previously pinned with a call to xfs_buf_item_pin().
- *
- * Also drop the reference to the buf item for the current transaction.
- * If the XFS_BLI_STALE flag is set and we are the last reference,
- * then free up the buf log item and unlock the buffer.
- *
- * If the remove flag is set we are called from uncommit in the
- * forced-shutdown path.  If that is true and the reference count on
- * the log item is going to drop to zero we need to free the item's
- * descriptor in the transaction.
+ * This is called to unpin the buffer associated with the buf log item which
+ * was previously pinned with a call to xfs_buf_item_pin().
  */
 STATIC void
 xfs_buf_item_unpin(
@@ -501,12 +492,26 @@ xfs_buf_item_unpin(
 
 	trace_xfs_buf_item_unpin(bip);
 
+	/*
+	 * Drop the bli ref associated with the pin and grab the hold required
+	 * for the I/O simulation failure in the abort case. We have to do this
+	 * before the pin count drops because the AIL doesn't acquire a bli
+	 * reference. Therefore if the refcount drops to zero, the bli could
+	 * still be AIL resident and the buffer submitted for I/O (and freed on
+	 * completion) at any point before we return. This can be removed once
+	 * the AIL properly holds a reference on the bli.
+	 */
 	freed = atomic_dec_and_test(&bip->bli_refcount);
-
+	if (freed && !stale && remove)
+		xfs_buf_hold(bp);
 	if (atomic_dec_and_test(&bp->b_pin_count))
 		wake_up_all(&bp->b_waiters);
 
-	if (freed && stale) {
+	 /* nothing to do but drop the pin count if the bli is active */
+	if (!freed)
+		return;
+
+	if (stale) {
 		ASSERT(bip->bli_flags & XFS_BLI_STALE);
 		ASSERT(xfs_buf_islocked(bp));
 		ASSERT(bp->b_flags & XBF_STALE);
@@ -549,13 +554,13 @@ xfs_buf_item_unpin(
 			ASSERT(bp->b_log_item == NULL);
 		}
 		xfs_buf_relse(bp);
-	} else if (freed && remove) {
+	} else if (remove) {
 		/*
 		 * The buffer must be locked and held by the caller to simulate
-		 * an async I/O failure.
+		 * an async I/O failure. We acquired the hold for this case
+		 * before the buffer was unpinned.
 		 */
 		xfs_buf_lock(bp);
-		xfs_buf_hold(bp);
 		bp->b_flags |= XBF_ASYNC;
 		xfs_buf_ioend_fail(bp);
 	}
-- 
2.26.3


  reply	other threads:[~2021-06-21 13:16 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-06-21 13:16 [PATCH v2 0/2] xfs: fix buffer use after free on unpin abort Brian Foster
2021-06-21 13:16 ` Brian Foster [this message]
2021-06-21 13:16 ` [PATCH v2 2/2] xfs: remove dead stale buf unpin handling code Brian Foster
2021-06-21 16:57 ` [PATCH v2 0/2] xfs: fix buffer use after free on unpin abort Darrick J. Wong

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210621131644.128177-2-bfoster@redhat.com \
    --to=bfoster@redhat.com \
    --cc=linux-xfs@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.