All of lore.kernel.org
 help / color / mirror / Atom feed
From: Javed Hasan <jhasan@marvell.com>
To: <martin.petersen@oracle.com>
Cc: <linux-scsi@vger.kernel.org>,
	<GR-QLogic-Storage-Upstream@marvell.com>, <jhasan@marvell.com>
Subject: [PATCH] qedf: Added check to synchronize abort and flush
Date: Thu, 24 Jun 2021 10:18:02 -0700	[thread overview]
Message-ID: <20210624171802.598-1-jhasan@marvell.com> (raw)

 -Issue
  Race condition between qedf_cleanup_fcport() and
  qedf_process_error_detect()->qedf_initiate_abts().

 Above race condition leads to below call trace.

 [2069091.203145] BUG: unable to handle kernel NULL pointer dereference at 0000000000000030
 [2069091.213100] IP: [<ffffffffc0666cc6>] qedf_process_error_detect+0x96/0x130 [qedf]
 [2069091.223391] PGD 1943049067 PUD 194304e067 PMD 0
 [2069091.233420] Oops: 0000 [#1] SMP
 [2069091.361820] CPU: 1 PID: 14751 Comm: kworker/1:46 Kdump: loaded Tainted: P           OE  ------------   3.10.0-1160.25.1.el7.x86_64 #1
 [2069091.388474] Hardware name: HPE Synergy 480 Gen10/Synergy 480 Gen10 Compute Module, BIOS I42 04/08/2020
 [2069091.402148] Workqueue: qedf_io_wq qedf_fp_io_handler [qedf]
 [2069091.415780] task: ffff9bb9f5190000 ti: ffff9bacaef9c000 task.ti: ffff9bacaef9c000
 [2069091.429590] RIP: 0010:[<ffffffffc0666cc6>]  [<ffffffffc0666cc6>] qedf_process_error_detect+0x96/0x130 [qedf]
 [2069091.443666] RSP: 0018:ffff9bacaef9fdb8  EFLAGS: 00010246
 [2069091.457692] RAX: 0000000000000000 RBX: ffff9bbbbbfb18a0 RCX: ffffffffc0672310
 [2069091.471997] RDX: 00000000000005de RSI: ffffffffc066e7f0 RDI: ffff9beb3f4538d8
 [2069091.486130] RBP: ffff9bacaef9fdd8 R08: 0000000000006000 R09: 0000000000006000
 [2069091.500321] R10: 0000000000001551 R11: ffffb582996ffff8 R12: ffffb5829b39cc18
 [2069091.514779] R13: ffff9badab380c28 R14: ffffd5827f643900 R15: 0000000000000040
 [2069091.529472] FS:  0000000000000000(0000) GS:ffff9beb3f440000(0000) knlGS:0000000000000000
 [2069091.543926] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 [2069091.558942] CR2: 0000000000000030 CR3: 000000193b9a2000 CR4: 00000000007607e0
 [2069091.573424] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 [2069091.587876] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
 [2069091.602007] PKRU: 00000000
 [2069091.616010] Call Trace:
 [2069091.629902]  [<ffffffffc0663969>] qedf_process_cqe+0x109/0x2e0 [qedf]
 [2069091.643941]  [<ffffffffc0663b66>] qedf_fp_io_handler+0x26/0x60 [qedf]
 [2069091.657948]  [<ffffffff85ebddcf>] process_one_work+0x17f/0x440
 [2069091.672111]  [<ffffffff85ebeee6>] worker_thread+0x126/0x3c0
 [2069091.686057]  [<ffffffff85ebedc0>] ? manage_workers.isra.26+0x2a0/0x2a0
 [2069091.700033]  [<ffffffff85ec5da1>] kthread+0xd1/0xe0
 [2069091.713891]  [<ffffffff85ec5cd0>] ? insert_kthread_work+0x40/0x40

 Fix: Added check in qedf_process_error_detect().
 When flush is active, let the cmds be completed from the cleanup contex.

Signed-off-by: Javed Hasan <jhasan@marvell.com>

diff --git a/drivers/scsi/qedf/qedf_io.c b/drivers/scsi/qedf/qedf_io.c
index 6184bc485811..5096e4cb7ad2 100644
--- a/drivers/scsi/qedf/qedf_io.c
+++ b/drivers/scsi/qedf/qedf_io.c
@@ -1515,9 +1515,19 @@ void qedf_process_error_detect(struct qedf_ctx *qedf, struct fcoe_cqe *cqe,
 {
 	int rval;
 
+	if (io_req == NULL) {
+		QEDF_INFO(NULL, QEDF_LOG_IO, "io_req is NULL.\n");
+		return;
+	}
+
+	if (io_req->fcport == NULL) {
+		QEDF_INFO(NULL, QEDF_LOG_IO,  "fcport is NULL.\n");
+		return;
+	}
+
 	if (!cqe) {
 		QEDF_INFO(&qedf->dbg_ctx, QEDF_LOG_IO,
-			  "cqe is NULL for io_req %p\n", io_req);
+			"cqe is NULL for io_req %p\n", io_req);
 		return;
 	}
 
@@ -1533,6 +1543,16 @@ void qedf_process_error_detect(struct qedf_ctx *qedf, struct fcoe_cqe *cqe,
 		  le32_to_cpu(cqe->cqe_info.err_info.rx_buf_off),
 		  le32_to_cpu(cqe->cqe_info.err_info.rx_id));
 
+	/* When flush is active, let the cmds be flushed out from the cleanup context */
+	if (test_bit(QEDF_RPORT_IN_TARGET_RESET, &io_req->fcport->flags) ||
+		(test_bit(QEDF_RPORT_IN_LUN_RESET, &io_req->fcport->flags) &&
+		 io_req->sc_cmd->device->lun == (u64)io_req->fcport->lun_reset_lun)) {
+		QEDF_ERR(&qedf->dbg_ctx,
+			"Dropping EQE for xid=0x%x as fcport is flushing",
+			io_req->xid);
+		return;
+	}
+
 	if (qedf->stop_io_on_error) {
 		qedf_stop_all_io(qedf);
 		return;
-- 
2.18.2


                 reply	other threads:[~2021-06-24 17:18 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210624171802.598-1-jhasan@marvell.com \
    --to=jhasan@marvell.com \
    --cc=GR-QLogic-Storage-Upstream@marvell.com \
    --cc=linux-scsi@vger.kernel.org \
    --cc=martin.petersen@oracle.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.