[PATCH 1/2] clk: qcom: camcc-sm8250: Fix absent mmcx regulator reference

[Bryan O'Donoghue <bryan.odonoghue@linaro.org>]

The current implementation omits the necessary mmcx supply, which means if
you are running the code for this block and a prior clock driver, like say
the videocc hasn't run, then a reset will be generated the first time we
touch these registers.

Fixes: 5d66ca79b58c ("clk: qcom: Add camera clock controller driver for SM8250")
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
---
 drivers/clk/qcom/camcc-sm8250.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/clk/qcom/camcc-sm8250.c b/drivers/clk/qcom/camcc-sm8250.c
index 439eaafdcc86..c51112546bfc 100644
--- a/drivers/clk/qcom/camcc-sm8250.c
+++ b/drivers/clk/qcom/camcc-sm8250.c
@@ -2212,6 +2212,7 @@ static struct gdsc bps_gdsc = {
 	},
 	.flags = HW_CTRL | POLL_CFG_GDSCR,
 	.pwrsts = PWRSTS_OFF_ON,
+	.supply = "mmcx",
 };
 
 static struct gdsc ipe_0_gdsc = {
@@ -2221,6 +2222,7 @@ static struct gdsc ipe_0_gdsc = {
 	},
 	.flags = HW_CTRL | POLL_CFG_GDSCR,
 	.pwrsts = PWRSTS_OFF_ON,
+	.supply = "mmcx",
 };
 
 static struct gdsc sbi_gdsc = {
@@ -2230,6 +2232,7 @@ static struct gdsc sbi_gdsc = {
 	},
 	.flags = HW_CTRL | POLL_CFG_GDSCR,
 	.pwrsts = PWRSTS_OFF_ON,
+	.supply = "mmcx",
 };
 
 static struct gdsc ife_0_gdsc = {
@@ -2239,6 +2242,7 @@ static struct gdsc ife_0_gdsc = {
 	},
 	.flags = POLL_CFG_GDSCR,
 	.pwrsts = PWRSTS_OFF_ON,
+	.supply = "mmcx",
 };
 
 static struct gdsc ife_1_gdsc = {
@@ -2248,6 +2252,7 @@ static struct gdsc ife_1_gdsc = {
 	},
 	.flags = POLL_CFG_GDSCR,
 	.pwrsts = PWRSTS_OFF_ON,
+	.supply = "mmcx",
 };
 
 static struct gdsc titan_top_gdsc = {
@@ -2257,6 +2262,7 @@ static struct gdsc titan_top_gdsc = {
 	},
 	.flags = POLL_CFG_GDSCR,
 	.pwrsts = PWRSTS_OFF_ON,
+	.supply = "mmcx",
 };
 
 static struct clk_regmap *cam_cc_sm8250_clocks[] = {
-- 
2.30.1