From: Stephen Boyd <swboyd@chromium.org> To: Rob Clark <robdclark@gmail.com> Cc: linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org, dri-devel@lists.freedesktop.org, freedreno@lists.freedesktop.org Subject: [PATCH] drm/msm/dpu: Add newlines to printks Date: Wed, 7 Jul 2021 23:56:19 -0700 [thread overview] Message-ID: <20210708065619.999199-1-swboyd@chromium.org> (raw) Add some missing newlines to the various DRM printks in this file. Noticed while looking at logs. While we're here unbreak quoted strings so grepping them is easier. Signed-off-by: Stephen Boyd <swboyd@chromium.org> --- drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c | 12 +++++------- 1 file changed, 5 insertions(+), 7 deletions(-) diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c index 1c04b7cce43e..0e9d3fa1544b 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c @@ -274,20 +274,20 @@ int dpu_encoder_helper_wait_for_irq(struct dpu_encoder_phys *phys_enc, /* return EWOULDBLOCK since we know the wait isn't necessary */ if (phys_enc->enable_state == DPU_ENC_DISABLED) { - DRM_ERROR("encoder is disabled id=%u, intr=%d, irq=%d", + DRM_ERROR("encoder is disabled id=%u, intr=%d, irq=%d\n", DRMID(phys_enc->parent), intr_idx, irq->irq_idx); return -EWOULDBLOCK; } if (irq->irq_idx < 0) { - DRM_DEBUG_KMS("skip irq wait id=%u, intr=%d, irq=%s", + DRM_DEBUG_KMS("skip irq wait id=%u, intr=%d, irq=%s\n", DRMID(phys_enc->parent), intr_idx, irq->name); return 0; } - DRM_DEBUG_KMS("id=%u, intr=%d, irq=%d, pp=%d, pending_cnt=%d", + DRM_DEBUG_KMS("id=%u, intr=%d, irq=%d, pp=%d, pending_cnt=%d\n", DRMID(phys_enc->parent), intr_idx, irq->irq_idx, phys_enc->hw_pp->idx - PINGPONG_0, atomic_read(wait_info->atomic_cnt)); @@ -303,8 +303,7 @@ int dpu_encoder_helper_wait_for_irq(struct dpu_encoder_phys *phys_enc, if (irq_status) { unsigned long flags; - DRM_DEBUG_KMS("irq not triggered id=%u, intr=%d, " - "irq=%d, pp=%d, atomic_cnt=%d", + DRM_DEBUG_KMS("irq not triggered id=%u, intr=%d, irq=%d, pp=%d, atomic_cnt=%d\n", DRMID(phys_enc->parent), intr_idx, irq->irq_idx, phys_enc->hw_pp->idx - PINGPONG_0, @@ -315,8 +314,7 @@ int dpu_encoder_helper_wait_for_irq(struct dpu_encoder_phys *phys_enc, ret = 0; } else { ret = -ETIMEDOUT; - DRM_DEBUG_KMS("irq timeout id=%u, intr=%d, " - "irq=%d, pp=%d, atomic_cnt=%d", + DRM_DEBUG_KMS("irq timeout id=%u, intr=%d, irq=%d, pp=%d, atomic_cnt=%d\n", DRMID(phys_enc->parent), intr_idx, irq->irq_idx, phys_enc->hw_pp->idx - PINGPONG_0, base-commit: e9f1cbc0c4114880090c7a578117d3b9cf184ad4 -- https://chromeos.dev
WARNING: multiple messages have this Message-ID (diff)
From: Stephen Boyd <swboyd@chromium.org> To: Rob Clark <robdclark@gmail.com> Cc: linux-arm-msm@vger.kernel.org, freedreno@lists.freedesktop.org, linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org Subject: [PATCH] drm/msm/dpu: Add newlines to printks Date: Wed, 7 Jul 2021 23:56:19 -0700 [thread overview] Message-ID: <20210708065619.999199-1-swboyd@chromium.org> (raw) Add some missing newlines to the various DRM printks in this file. Noticed while looking at logs. While we're here unbreak quoted strings so grepping them is easier. Signed-off-by: Stephen Boyd <swboyd@chromium.org> --- drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c | 12 +++++------- 1 file changed, 5 insertions(+), 7 deletions(-) diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c index 1c04b7cce43e..0e9d3fa1544b 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c @@ -274,20 +274,20 @@ int dpu_encoder_helper_wait_for_irq(struct dpu_encoder_phys *phys_enc, /* return EWOULDBLOCK since we know the wait isn't necessary */ if (phys_enc->enable_state == DPU_ENC_DISABLED) { - DRM_ERROR("encoder is disabled id=%u, intr=%d, irq=%d", + DRM_ERROR("encoder is disabled id=%u, intr=%d, irq=%d\n", DRMID(phys_enc->parent), intr_idx, irq->irq_idx); return -EWOULDBLOCK; } if (irq->irq_idx < 0) { - DRM_DEBUG_KMS("skip irq wait id=%u, intr=%d, irq=%s", + DRM_DEBUG_KMS("skip irq wait id=%u, intr=%d, irq=%s\n", DRMID(phys_enc->parent), intr_idx, irq->name); return 0; } - DRM_DEBUG_KMS("id=%u, intr=%d, irq=%d, pp=%d, pending_cnt=%d", + DRM_DEBUG_KMS("id=%u, intr=%d, irq=%d, pp=%d, pending_cnt=%d\n", DRMID(phys_enc->parent), intr_idx, irq->irq_idx, phys_enc->hw_pp->idx - PINGPONG_0, atomic_read(wait_info->atomic_cnt)); @@ -303,8 +303,7 @@ int dpu_encoder_helper_wait_for_irq(struct dpu_encoder_phys *phys_enc, if (irq_status) { unsigned long flags; - DRM_DEBUG_KMS("irq not triggered id=%u, intr=%d, " - "irq=%d, pp=%d, atomic_cnt=%d", + DRM_DEBUG_KMS("irq not triggered id=%u, intr=%d, irq=%d, pp=%d, atomic_cnt=%d\n", DRMID(phys_enc->parent), intr_idx, irq->irq_idx, phys_enc->hw_pp->idx - PINGPONG_0, @@ -315,8 +314,7 @@ int dpu_encoder_helper_wait_for_irq(struct dpu_encoder_phys *phys_enc, ret = 0; } else { ret = -ETIMEDOUT; - DRM_DEBUG_KMS("irq timeout id=%u, intr=%d, " - "irq=%d, pp=%d, atomic_cnt=%d", + DRM_DEBUG_KMS("irq timeout id=%u, intr=%d, irq=%d, pp=%d, atomic_cnt=%d\n", DRMID(phys_enc->parent), intr_idx, irq->irq_idx, phys_enc->hw_pp->idx - PINGPONG_0, base-commit: e9f1cbc0c4114880090c7a578117d3b9cf184ad4 -- https://chromeos.dev
next reply other threads:[~2021-07-08 6:56 UTC|newest] Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-07-08 6:56 Stephen Boyd [this message] 2021-07-08 6:56 ` [PATCH] drm/msm/dpu: Add newlines to printks Stephen Boyd 2021-07-08 11:38 ` Dmitry Baryshkov 2021-07-08 11:38 ` Dmitry Baryshkov
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20210708065619.999199-1-swboyd@chromium.org \ --to=swboyd@chromium.org \ --cc=dri-devel@lists.freedesktop.org \ --cc=freedreno@lists.freedesktop.org \ --cc=linux-arm-msm@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=robdclark@gmail.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.