[PATCH RESEND] dt-bindings: i2c: brcm,iproc-i2c: convert to the json-schema

["Rafał Miłecki" <zajec5@gmail.com>]

From: Rafał Miłecki <rafal@milecki.pl>

This helps validating DTS files.

Introduced changes:
1. Added arm-gic.h include

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
---
RESEND: commit 11480dbfe1d5 ("ASoC: wm8750: convert to the json-schema")
is part of the 5.14-rc1 so Rob's bot should be happy this time.
---
 .../bindings/i2c/brcm,iproc-i2c.txt           | 46 ------------
 .../bindings/i2c/brcm,iproc-i2c.yaml          | 71 +++++++++++++++++++
 2 files changed, 71 insertions(+), 46 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/i2c/brcm,iproc-i2c.txt
 create mode 100644 Documentation/devicetree/bindings/i2c/brcm,iproc-i2c.yaml

diff --git a/Documentation/devicetree/bindings/i2c/brcm,iproc-i2c.txt b/Documentation/devicetree/bindings/i2c/brcm,iproc-i2c.txt
deleted file mode 100644
index d12cc33cca6c..000000000000
--- a/Documentation/devicetree/bindings/i2c/brcm,iproc-i2c.txt
+++ /dev/null
@@ -1,46 +0,0 @@
-Broadcom iProc I2C controller
-
-Required properties:
-
-- compatible:
-    Must be "brcm,iproc-i2c" or "brcm,iproc-nic-i2c"
-
-- reg:
-    Define the base and range of the I/O address space that contain the iProc
-    I2C controller registers
-
-- clock-frequency:
-    This is the I2C bus clock. Need to be either 100000 or 400000
-
-- #address-cells:
-    Always 1 (for I2C addresses)
-
-- #size-cells:
-    Always 0
-
-Optional properties:
-
-- interrupts:
-    Should contain the I2C interrupt. For certain revisions of the I2C
-    controller, I2C interrupt is unwired to the interrupt controller. In such
-    case, this property should be left unspecified, and driver will fall back
-    to polling mode
-
-- brcm,ape-hsls-addr-mask:
-    Required for "brcm,iproc-nic-i2c". Host view of address mask into the
-    'APE' co-processor. Value must be unsigned, 32-bit
-
-Example:
-	i2c0: i2c@18008000 {
-		compatible = "brcm,iproc-i2c";
-		reg = <0x18008000 0x100>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		interrupts = <GIC_SPI 85 IRQ_TYPE_NONE>;
-		clock-frequency = <100000>;
-
-		codec: wm8750@1a {
-			compatible = "wlf,wm8750";
-			reg = <0x1a>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/i2c/brcm,iproc-i2c.yaml b/Documentation/devicetree/bindings/i2c/brcm,iproc-i2c.yaml
new file mode 100644
index 000000000000..2aa75b7add7b
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/brcm,iproc-i2c.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/brcm,iproc-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom iProc I2C controller
+
+maintainers:
+  - Rafał Miłecki <rafal@milecki.pl>
+
+properties:
+  compatible:
+    enum:
+      - brcm,iproc-i2c
+      - brcm,iproc-nic-i2c
+
+  reg:
+    maxItems: 1
+
+  clock-frequency:
+    enum: [ 100000, 400000 ]
+
+  interrupts:
+    description: |
+      Should contain the I2C interrupt. For certain revisions of the I2C
+      controller, I2C interrupt is unwired to the interrupt controller. In such
+      case, this property should be left unspecified, and driver will fall back
+      to polling mode
+    maxItems: 1
+
+  brcm,ape-hsls-addr-mask:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Host view of address mask into the 'APE' co-processor
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: brcm,iproc-nic-i2c
+    then:
+      required:
+        - brcm,ape-hsls-addr-mask
+
+unevaluatedProperties: false
+
+required:
+  - reg
+  - clock-frequency
+  - '#address-cells'
+  - '#size-cells'
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    i2c@18008000 {
+        compatible = "brcm,iproc-i2c";
+        reg = <0x18008000 0x100>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        interrupts = <GIC_SPI 85 IRQ_TYPE_NONE>;
+        clock-frequency = <100000>;
+
+        wm8750@1a {
+            compatible = "wlf,wm8750";
+            reg = <0x1a>;
+        };
+    };
-- 
2.26.2