From: Alex Sierra <alex.sierra@amd.com>
To: akpm@linux-foundation.org, Felix.Kuehling@amd.com,
linux-mm@kvack.org, rcampbell@nvidia.com,
linux-ext4@vger.kernel.org, linux-xfs@vger.kernel.org
Cc: amd-gfx@lists.freedesktop.org, dri-devel@lists.freedesktop.org,
hch@lst.de, jgg@nvidia.com, jglisse@redhat.com
Subject: [PATCH v4 13/13] tools: update test_hmm script to support SP config
Date: Sat, 17 Jul 2021 14:21:35 -0500 [thread overview]
Message-ID: <20210717192135.9030-14-alex.sierra@amd.com> (raw)
In-Reply-To: <20210717192135.9030-1-alex.sierra@amd.com>
Add two more parameters to set spm_addr_dev0 & spm_addr_dev1
addresses. These two parameters configure the start SP
addresses for each device in test_hmm driver.
Consequently, this configures zone device type as generic.
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
---
tools/testing/selftests/vm/test_hmm.sh | 20 +++++++++++++++++---
1 file changed, 17 insertions(+), 3 deletions(-)
diff --git a/tools/testing/selftests/vm/test_hmm.sh b/tools/testing/selftests/vm/test_hmm.sh
index 0647b525a625..3eeabe94399f 100755
--- a/tools/testing/selftests/vm/test_hmm.sh
+++ b/tools/testing/selftests/vm/test_hmm.sh
@@ -40,7 +40,18 @@ check_test_requirements()
load_driver()
{
- modprobe $DRIVER > /dev/null 2>&1
+ if [ $# -eq 0 ]; then
+ modprobe $DRIVER > /dev/null 2>&1
+ else
+ if [ $# -eq 2 ]; then
+ modprobe $DRIVER spm_addr_dev0=$1 spm_addr_dev1=$2
+ > /dev/null 2>&1
+ else
+ echo "Missing module parameters. Make sure pass"\
+ "spm_addr_dev0 and spm_addr_dev1"
+ usage
+ fi
+ fi
if [ $? == 0 ]; then
major=$(awk "\$2==\"HMM_DMIRROR\" {print \$1}" /proc/devices)
mknod /dev/hmm_dmirror0 c $major 0
@@ -58,7 +69,7 @@ run_smoke()
{
echo "Running smoke test. Note, this test provides basic coverage."
- load_driver
+ load_driver $1 $2
$(dirname "${BASH_SOURCE[0]}")/hmm-tests
unload_driver
}
@@ -75,6 +86,9 @@ usage()
echo "# Smoke testing"
echo "./${TEST_NAME}.sh smoke"
echo
+ echo "# Smoke testing with SPM enabled"
+ echo "./${TEST_NAME}.sh smoke <spm_addr_dev0> <spm_addr_dev1>"
+ echo
exit 0
}
@@ -84,7 +98,7 @@ function run_test()
usage
else
if [ "$1" = "smoke" ]; then
- run_smoke
+ run_smoke $2 $3
else
usage
fi
--
2.32.0
WARNING: multiple messages have this Message-ID (diff)
From: Alex Sierra <alex.sierra@amd.com>
To: akpm@linux-foundation.org, Felix.Kuehling@amd.com,
linux-mm@kvack.org, rcampbell@nvidia.com,
linux-ext4@vger.kernel.org, linux-xfs@vger.kernel.org
Cc: jglisse@redhat.com, jgg@nvidia.com,
dri-devel@lists.freedesktop.org, amd-gfx@lists.freedesktop.org,
hch@lst.de
Subject: [PATCH v4 13/13] tools: update test_hmm script to support SP config
Date: Sat, 17 Jul 2021 14:21:35 -0500 [thread overview]
Message-ID: <20210717192135.9030-14-alex.sierra@amd.com> (raw)
In-Reply-To: <20210717192135.9030-1-alex.sierra@amd.com>
Add two more parameters to set spm_addr_dev0 & spm_addr_dev1
addresses. These two parameters configure the start SP
addresses for each device in test_hmm driver.
Consequently, this configures zone device type as generic.
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
---
tools/testing/selftests/vm/test_hmm.sh | 20 +++++++++++++++++---
1 file changed, 17 insertions(+), 3 deletions(-)
diff --git a/tools/testing/selftests/vm/test_hmm.sh b/tools/testing/selftests/vm/test_hmm.sh
index 0647b525a625..3eeabe94399f 100755
--- a/tools/testing/selftests/vm/test_hmm.sh
+++ b/tools/testing/selftests/vm/test_hmm.sh
@@ -40,7 +40,18 @@ check_test_requirements()
load_driver()
{
- modprobe $DRIVER > /dev/null 2>&1
+ if [ $# -eq 0 ]; then
+ modprobe $DRIVER > /dev/null 2>&1
+ else
+ if [ $# -eq 2 ]; then
+ modprobe $DRIVER spm_addr_dev0=$1 spm_addr_dev1=$2
+ > /dev/null 2>&1
+ else
+ echo "Missing module parameters. Make sure pass"\
+ "spm_addr_dev0 and spm_addr_dev1"
+ usage
+ fi
+ fi
if [ $? == 0 ]; then
major=$(awk "\$2==\"HMM_DMIRROR\" {print \$1}" /proc/devices)
mknod /dev/hmm_dmirror0 c $major 0
@@ -58,7 +69,7 @@ run_smoke()
{
echo "Running smoke test. Note, this test provides basic coverage."
- load_driver
+ load_driver $1 $2
$(dirname "${BASH_SOURCE[0]}")/hmm-tests
unload_driver
}
@@ -75,6 +86,9 @@ usage()
echo "# Smoke testing"
echo "./${TEST_NAME}.sh smoke"
echo
+ echo "# Smoke testing with SPM enabled"
+ echo "./${TEST_NAME}.sh smoke <spm_addr_dev0> <spm_addr_dev1>"
+ echo
exit 0
}
@@ -84,7 +98,7 @@ function run_test()
usage
else
if [ "$1" = "smoke" ]; then
- run_smoke
+ run_smoke $2 $3
else
usage
fi
--
2.32.0
WARNING: multiple messages have this Message-ID (diff)
From: Alex Sierra <alex.sierra@amd.com>
To: akpm@linux-foundation.org, Felix.Kuehling@amd.com,
linux-mm@kvack.org, rcampbell@nvidia.com,
linux-ext4@vger.kernel.org, linux-xfs@vger.kernel.org
Cc: jglisse@redhat.com, jgg@nvidia.com,
dri-devel@lists.freedesktop.org, amd-gfx@lists.freedesktop.org,
hch@lst.de
Subject: [PATCH v4 13/13] tools: update test_hmm script to support SP config
Date: Sat, 17 Jul 2021 14:21:35 -0500 [thread overview]
Message-ID: <20210717192135.9030-14-alex.sierra@amd.com> (raw)
In-Reply-To: <20210717192135.9030-1-alex.sierra@amd.com>
Add two more parameters to set spm_addr_dev0 & spm_addr_dev1
addresses. These two parameters configure the start SP
addresses for each device in test_hmm driver.
Consequently, this configures zone device type as generic.
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
---
tools/testing/selftests/vm/test_hmm.sh | 20 +++++++++++++++++---
1 file changed, 17 insertions(+), 3 deletions(-)
diff --git a/tools/testing/selftests/vm/test_hmm.sh b/tools/testing/selftests/vm/test_hmm.sh
index 0647b525a625..3eeabe94399f 100755
--- a/tools/testing/selftests/vm/test_hmm.sh
+++ b/tools/testing/selftests/vm/test_hmm.sh
@@ -40,7 +40,18 @@ check_test_requirements()
load_driver()
{
- modprobe $DRIVER > /dev/null 2>&1
+ if [ $# -eq 0 ]; then
+ modprobe $DRIVER > /dev/null 2>&1
+ else
+ if [ $# -eq 2 ]; then
+ modprobe $DRIVER spm_addr_dev0=$1 spm_addr_dev1=$2
+ > /dev/null 2>&1
+ else
+ echo "Missing module parameters. Make sure pass"\
+ "spm_addr_dev0 and spm_addr_dev1"
+ usage
+ fi
+ fi
if [ $? == 0 ]; then
major=$(awk "\$2==\"HMM_DMIRROR\" {print \$1}" /proc/devices)
mknod /dev/hmm_dmirror0 c $major 0
@@ -58,7 +69,7 @@ run_smoke()
{
echo "Running smoke test. Note, this test provides basic coverage."
- load_driver
+ load_driver $1 $2
$(dirname "${BASH_SOURCE[0]}")/hmm-tests
unload_driver
}
@@ -75,6 +86,9 @@ usage()
echo "# Smoke testing"
echo "./${TEST_NAME}.sh smoke"
echo
+ echo "# Smoke testing with SPM enabled"
+ echo "./${TEST_NAME}.sh smoke <spm_addr_dev0> <spm_addr_dev1>"
+ echo
exit 0
}
@@ -84,7 +98,7 @@ function run_test()
usage
else
if [ "$1" = "smoke" ]; then
- run_smoke
+ run_smoke $2 $3
else
usage
fi
--
2.32.0
_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx
next prev parent reply other threads:[~2021-07-17 19:22 UTC|newest]
Thread overview: 64+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-07-17 19:21 [PATCH v4 00/13] Support DEVICE_GENERIC memory in migrate_vma_* Alex Sierra
2021-07-17 19:21 ` Alex Sierra
2021-07-17 19:21 ` Alex Sierra
2021-07-17 19:21 ` [PATCH v4 01/13] ext4/xfs: add page refcount helper Alex Sierra
2021-07-17 19:21 ` Alex Sierra
2021-07-17 19:21 ` Alex Sierra
2021-07-17 19:21 ` [PATCH v4 02/13] mm: remove extra ZONE_DEVICE struct page refcount Alex Sierra
2021-07-17 19:21 ` Alex Sierra
2021-07-17 19:21 ` Alex Sierra
2021-07-17 19:21 ` [PATCH v4 03/13] kernel: resource: lookup_resource as exported symbol Alex Sierra
2021-07-17 19:21 ` Alex Sierra
2021-07-17 19:21 ` Alex Sierra
2021-07-19 9:16 ` Christoph Hellwig
2021-07-19 9:16 ` Christoph Hellwig
2021-07-17 19:21 ` [PATCH v4 04/13] drm/amdkfd: add SPM support for SVM Alex Sierra
2021-07-17 19:21 ` Alex Sierra
2021-07-17 19:21 ` Alex Sierra
2021-07-17 19:21 ` [PATCH v4 05/13] drm/amdkfd: generic type as sys mem on migration to ram Alex Sierra
2021-07-17 19:21 ` Alex Sierra
2021-07-17 19:21 ` Alex Sierra
2021-07-19 9:17 ` Christoph Hellwig
2021-07-19 9:17 ` Christoph Hellwig
2021-07-17 19:21 ` [PATCH v4 06/13] include/linux/mm.h: helpers to check zone device generic type Alex Sierra
2021-07-17 19:21 ` Alex Sierra
2021-07-17 19:21 ` Alex Sierra
2021-07-19 20:47 ` Zeng, Oak
2021-07-19 20:47 ` Zeng, Oak
2021-07-19 20:47 ` Zeng, Oak
2021-07-17 19:21 ` [PATCH v4 07/13] mm: add generic type support to migrate_vma helpers Alex Sierra
2021-07-17 19:21 ` Alex Sierra
2021-07-17 19:21 ` Alex Sierra
2021-07-17 19:21 ` [PATCH v4 08/13] mm: call pgmap->ops->page_free for DEVICE_GENERIC pages Alex Sierra
2021-07-17 19:21 ` Alex Sierra
2021-07-17 19:21 ` Alex Sierra
2021-07-19 9:18 ` Christoph Hellwig
2021-07-19 9:18 ` Christoph Hellwig
2021-07-17 19:21 ` [PATCH v4 09/13] lib: test_hmm add ioctl to get zone device type Alex Sierra
2021-07-17 19:21 ` Alex Sierra
2021-07-17 19:21 ` Alex Sierra
2021-07-17 19:21 ` [PATCH v4 10/13] lib: test_hmm add module param for " Alex Sierra
2021-07-17 19:21 ` Alex Sierra
2021-07-17 19:21 ` Alex Sierra
2021-07-22 12:23 ` Jason Gunthorpe
2021-07-22 12:23 ` Jason Gunthorpe
2021-07-22 12:23 ` Jason Gunthorpe
2021-07-22 16:59 ` Sierra Guiza, Alejandro (Alex)
2021-07-22 16:59 ` Sierra Guiza, Alejandro (Alex)
2021-07-22 16:59 ` Sierra Guiza, Alejandro (Alex)
2021-07-22 17:26 ` Jason Gunthorpe
2021-07-22 17:26 ` Jason Gunthorpe
2021-07-22 17:26 ` Jason Gunthorpe
2021-07-28 23:45 ` Sierra Guiza, Alejandro (Alex)
2021-07-28 23:45 ` Sierra Guiza, Alejandro (Alex)
2021-07-28 23:45 ` Sierra Guiza, Alejandro (Alex)
2021-07-30 19:11 ` Felix Kuehling
2021-07-17 19:21 ` [PATCH v4 11/13] lib: add support for device generic type in test_hmm Alex Sierra
2021-07-17 19:21 ` Alex Sierra
2021-07-17 19:21 ` Alex Sierra
2021-07-17 19:21 ` [PATCH v4 12/13] tools: update hmm-test to support device generic type Alex Sierra
2021-07-17 19:21 ` Alex Sierra
2021-07-17 19:21 ` Alex Sierra
2021-07-17 19:21 ` Alex Sierra [this message]
2021-07-17 19:21 ` [PATCH v4 13/13] tools: update test_hmm script to support SP config Alex Sierra
2021-07-17 19:21 ` Alex Sierra
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210717192135.9030-14-alex.sierra@amd.com \
--to=alex.sierra@amd.com \
--cc=Felix.Kuehling@amd.com \
--cc=akpm@linux-foundation.org \
--cc=amd-gfx@lists.freedesktop.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=hch@lst.de \
--cc=jgg@nvidia.com \
--cc=jglisse@redhat.com \
--cc=linux-ext4@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=linux-xfs@vger.kernel.org \
--cc=rcampbell@nvidia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.