From: Claudiu Beznea <claudiu.beznea@microchip.com> To: <stern@rowland.harvard.edu>, <gregkh@linuxfoundation.org>, <nicolas.ferre@microchip.com>, <alexandre.belloni@bootlin.com>, <ludovic.desroches@microchip.com> Cc: <linux-usb@vger.kernel.org>, <linux-arm-kernel@lists.infradead.org>, <linux-kernel@vger.kernel.org>, Claudiu Beznea <claudiu.beznea@microchip.com> Subject: [PATCH v2] usb: host: ohci-at91: suspend/resume ports after/before OHCI accesses Date: Wed, 21 Jul 2021 16:29:05 +0300 [thread overview] Message-ID: <20210721132905.1970713-1-claudiu.beznea@microchip.com> (raw) On SAMA7G5 suspending ports will cut the access to OHCI registers and any subsequent access to them will lead to CPU being blocked trying to access that memory. Same thing happens on resume: if OHCI memory is accessed before resuming ports the CPU will block on that access. The OCHI memory is accessed on suspend/resume though ohci_suspend()/ohci_resume(). Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> --- Changes in v2: - rebase on top of v5.14-rc2 - collected tag drivers/usb/host/ohci-at91.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c index 9bbd7ddd0003..a24aea3d2759 100644 --- a/drivers/usb/host/ohci-at91.c +++ b/drivers/usb/host/ohci-at91.c @@ -611,8 +611,6 @@ ohci_hcd_at91_drv_suspend(struct device *dev) if (ohci_at91->wakeup) enable_irq_wake(hcd->irq); - ohci_at91_port_suspend(ohci_at91->sfr_regmap, 1); - ret = ohci_suspend(hcd, ohci_at91->wakeup); if (ret) { if (ohci_at91->wakeup) @@ -632,7 +630,10 @@ ohci_hcd_at91_drv_suspend(struct device *dev) /* flush the writes */ (void) ohci_readl (ohci, &ohci->regs->control); msleep(1); + ohci_at91_port_suspend(ohci_at91->sfr_regmap, 1); at91_stop_clock(ohci_at91); + } else { + ohci_at91_port_suspend(ohci_at91->sfr_regmap, 1); } return ret; @@ -644,6 +645,8 @@ ohci_hcd_at91_drv_resume(struct device *dev) struct usb_hcd *hcd = dev_get_drvdata(dev); struct ohci_at91_priv *ohci_at91 = hcd_to_ohci_at91_priv(hcd); + ohci_at91_port_suspend(ohci_at91->sfr_regmap, 0); + if (ohci_at91->wakeup) disable_irq_wake(hcd->irq); else @@ -651,8 +654,6 @@ ohci_hcd_at91_drv_resume(struct device *dev) ohci_resume(hcd, false); - ohci_at91_port_suspend(ohci_at91->sfr_regmap, 0); - return 0; } -- 2.25.1
WARNING: multiple messages have this Message-ID (diff)
From: Claudiu Beznea <claudiu.beznea@microchip.com> To: <stern@rowland.harvard.edu>, <gregkh@linuxfoundation.org>, <nicolas.ferre@microchip.com>, <alexandre.belloni@bootlin.com>, <ludovic.desroches@microchip.com> Cc: <linux-usb@vger.kernel.org>, <linux-arm-kernel@lists.infradead.org>, <linux-kernel@vger.kernel.org>, Claudiu Beznea <claudiu.beznea@microchip.com> Subject: [PATCH v2] usb: host: ohci-at91: suspend/resume ports after/before OHCI accesses Date: Wed, 21 Jul 2021 16:29:05 +0300 [thread overview] Message-ID: <20210721132905.1970713-1-claudiu.beznea@microchip.com> (raw) On SAMA7G5 suspending ports will cut the access to OHCI registers and any subsequent access to them will lead to CPU being blocked trying to access that memory. Same thing happens on resume: if OHCI memory is accessed before resuming ports the CPU will block on that access. The OCHI memory is accessed on suspend/resume though ohci_suspend()/ohci_resume(). Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> --- Changes in v2: - rebase on top of v5.14-rc2 - collected tag drivers/usb/host/ohci-at91.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c index 9bbd7ddd0003..a24aea3d2759 100644 --- a/drivers/usb/host/ohci-at91.c +++ b/drivers/usb/host/ohci-at91.c @@ -611,8 +611,6 @@ ohci_hcd_at91_drv_suspend(struct device *dev) if (ohci_at91->wakeup) enable_irq_wake(hcd->irq); - ohci_at91_port_suspend(ohci_at91->sfr_regmap, 1); - ret = ohci_suspend(hcd, ohci_at91->wakeup); if (ret) { if (ohci_at91->wakeup) @@ -632,7 +630,10 @@ ohci_hcd_at91_drv_suspend(struct device *dev) /* flush the writes */ (void) ohci_readl (ohci, &ohci->regs->control); msleep(1); + ohci_at91_port_suspend(ohci_at91->sfr_regmap, 1); at91_stop_clock(ohci_at91); + } else { + ohci_at91_port_suspend(ohci_at91->sfr_regmap, 1); } return ret; @@ -644,6 +645,8 @@ ohci_hcd_at91_drv_resume(struct device *dev) struct usb_hcd *hcd = dev_get_drvdata(dev); struct ohci_at91_priv *ohci_at91 = hcd_to_ohci_at91_priv(hcd); + ohci_at91_port_suspend(ohci_at91->sfr_regmap, 0); + if (ohci_at91->wakeup) disable_irq_wake(hcd->irq); else @@ -651,8 +654,6 @@ ohci_hcd_at91_drv_resume(struct device *dev) ohci_resume(hcd, false); - ohci_at91_port_suspend(ohci_at91->sfr_regmap, 0); - return 0; } -- 2.25.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2021-07-21 13:31 UTC|newest] Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-07-21 13:29 Claudiu Beznea [this message] 2021-07-21 13:29 ` [PATCH v2] usb: host: ohci-at91: suspend/resume ports after/before OHCI accesses Claudiu Beznea
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20210721132905.1970713-1-claudiu.beznea@microchip.com \ --to=claudiu.beznea@microchip.com \ --cc=alexandre.belloni@bootlin.com \ --cc=gregkh@linuxfoundation.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-usb@vger.kernel.org \ --cc=ludovic.desroches@microchip.com \ --cc=nicolas.ferre@microchip.com \ --cc=stern@rowland.harvard.edu \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.