All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jisheng Zhang <jszhang3@mail.ustc.edu.cn>
To: Paul Walmsley <paul.walmsley@sifive.com>,
	Palmer Dabbelt <palmer@dabbelt.com>,
	Albert Ou <aou@eecs.berkeley.edu>
Cc: linux-riscv@lists.infradead.org, linux-kernel@vger.kernel.org,
	Andreas Schwab <schwab@linux-m68k.org>,
	Atish Patra <atishp@atishpatra.org>
Subject: [PATCH] riscv: stacktrace: pin the task's stack in get_wchan
Date: Fri, 23 Jul 2021 08:22:26 +0800	[thread overview]
Message-ID: <20210723082226.7b7b4707@xhacker> (raw)

From: Jisheng Zhang <jszhang@kernel.org>

Pin the task's stack before calling walk_stackframe() in get_wchan().
This can fix the panic as reported by Andreas when CONFIG_VMAP_STACK=y:

[   65.609696] Unable to handle kernel paging request at virtual address ffffffd0003bbde8
[   65.610460] Oops [#1]
[   65.610626] Modules linked in: virtio_blk virtio_mmio rtc_goldfish btrfs blake2b_generic libcrc32c xor raid6_pq sg dm_multipath dm_mod scsi_dh_rdac scsi_dh_emc scsi_dh_alua efivarfs
[   65.611670] CPU: 2 PID: 1 Comm: systemd Not tainted 5.14.0-rc1-1.g34fe32a-default #1 openSUSE Tumbleweed (unreleased) c62f7109153e5a0897ee58ba52393ad99b070fd2
[   65.612334] Hardware name: riscv-virtio,qemu (DT)
[   65.613008] epc : get_wchan+0x5c/0x88
[   65.613334]  ra : get_wchan+0x42/0x88
[   65.613625] epc : ffffffff800048a4 ra : ffffffff8000488a sp : ffffffd00021bb90
[   65.614008]  gp : ffffffff817709f8 tp : ffffffe07fe91b80 t0 : 00000000000001f8
[   65.614411]  t1 : 0000000000020000 t2 : 0000000000000000 s0 : ffffffd00021bbd0
[   65.614818]  s1 : ffffffd0003bbdf0 a0 : 0000000000000001 a1 : 0000000000000002
[   65.615237]  a2 : ffffffff81618008 a3 : 0000000000000000 a4 : 0000000000000000
[   65.615637]  a5 : ffffffd0003bc000 a6 : 0000000000000002 a7 : ffffffe27d370000
[   65.616022]  s2 : ffffffd0003bbd90 s3 : ffffffff8071a81e s4 : 0000000000003fff
[   65.616407]  s5 : ffffffffffffc000 s6 : 0000000000000000 s7 : ffffffff81618008
[   65.616845]  s8 : 0000000000000001 s9 : 0000000180000040 s10: 0000000000000000
[   65.617248]  s11: 000000000000016b t3 : 000000ff00000000 t4 : 0c6aec92de5e3fd7
[   65.617672]  t5 : fff78f60608fcfff t6 : 0000000000000078
[   65.618088] status: 0000000000000120 badaddr: ffffffd0003bbde8 cause: 000000000000000d
[   65.618621] [<ffffffff800048a4>] get_wchan+0x5c/0x88
[   65.619008] [<ffffffff8022da88>] do_task_stat+0x7a2/0xa46
[   65.619325] [<ffffffff8022e87e>] proc_tgid_stat+0xe/0x16
[   65.619637] [<ffffffff80227dd6>] proc_single_show+0x46/0x96
[   65.619979] [<ffffffff801ccb1e>] seq_read_iter+0x190/0x31e
[   65.620341] [<ffffffff801ccd70>] seq_read+0xc4/0x104
[   65.620633] [<ffffffff801a6bfe>] vfs_read+0x6a/0x112
[   65.620922] [<ffffffff801a701c>] ksys_read+0x54/0xbe
[   65.621206] [<ffffffff801a7094>] sys_read+0xe/0x16
[   65.621474] [<ffffffff8000303e>] ret_from_syscall+0x0/0x2
[   65.622169] ---[ end trace f24856ed2b8789c5 ]---
[   65.622832] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b

Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
---
 arch/riscv/kernel/stacktrace.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/arch/riscv/kernel/stacktrace.c b/arch/riscv/kernel/stacktrace.c
index ff467b98c3e3..ac7593607fa6 100644
--- a/arch/riscv/kernel/stacktrace.c
+++ b/arch/riscv/kernel/stacktrace.c
@@ -132,8 +132,12 @@ unsigned long get_wchan(struct task_struct *task)
 {
 	unsigned long pc = 0;
 
-	if (likely(task && task != current && !task_is_running(task)))
+	if (likely(task && task != current && !task_is_running(task))) {
+		if (!try_get_task_stack(task))
+			return 0;
 		walk_stackframe(task, NULL, save_wchan, &pc);
+		put_task_stack(task);
+	}
 	return pc;
 }
 
-- 
2.32.0



WARNING: multiple messages have this Message-ID (diff)
From: Jisheng Zhang <jszhang3@mail.ustc.edu.cn>
To: Paul Walmsley <paul.walmsley@sifive.com>,
	Palmer Dabbelt <palmer@dabbelt.com>,
	Albert Ou <aou@eecs.berkeley.edu>
Cc: linux-riscv@lists.infradead.org, linux-kernel@vger.kernel.org,
	Andreas Schwab <schwab@linux-m68k.org>,
	Atish Patra <atishp@atishpatra.org>
Subject: [PATCH] riscv: stacktrace: pin the task's stack in get_wchan
Date: Fri, 23 Jul 2021 08:22:26 +0800	[thread overview]
Message-ID: <20210723082226.7b7b4707@xhacker> (raw)

From: Jisheng Zhang <jszhang@kernel.org>

Pin the task's stack before calling walk_stackframe() in get_wchan().
This can fix the panic as reported by Andreas when CONFIG_VMAP_STACK=y:

[   65.609696] Unable to handle kernel paging request at virtual address ffffffd0003bbde8
[   65.610460] Oops [#1]
[   65.610626] Modules linked in: virtio_blk virtio_mmio rtc_goldfish btrfs blake2b_generic libcrc32c xor raid6_pq sg dm_multipath dm_mod scsi_dh_rdac scsi_dh_emc scsi_dh_alua efivarfs
[   65.611670] CPU: 2 PID: 1 Comm: systemd Not tainted 5.14.0-rc1-1.g34fe32a-default #1 openSUSE Tumbleweed (unreleased) c62f7109153e5a0897ee58ba52393ad99b070fd2
[   65.612334] Hardware name: riscv-virtio,qemu (DT)
[   65.613008] epc : get_wchan+0x5c/0x88
[   65.613334]  ra : get_wchan+0x42/0x88
[   65.613625] epc : ffffffff800048a4 ra : ffffffff8000488a sp : ffffffd00021bb90
[   65.614008]  gp : ffffffff817709f8 tp : ffffffe07fe91b80 t0 : 00000000000001f8
[   65.614411]  t1 : 0000000000020000 t2 : 0000000000000000 s0 : ffffffd00021bbd0
[   65.614818]  s1 : ffffffd0003bbdf0 a0 : 0000000000000001 a1 : 0000000000000002
[   65.615237]  a2 : ffffffff81618008 a3 : 0000000000000000 a4 : 0000000000000000
[   65.615637]  a5 : ffffffd0003bc000 a6 : 0000000000000002 a7 : ffffffe27d370000
[   65.616022]  s2 : ffffffd0003bbd90 s3 : ffffffff8071a81e s4 : 0000000000003fff
[   65.616407]  s5 : ffffffffffffc000 s6 : 0000000000000000 s7 : ffffffff81618008
[   65.616845]  s8 : 0000000000000001 s9 : 0000000180000040 s10: 0000000000000000
[   65.617248]  s11: 000000000000016b t3 : 000000ff00000000 t4 : 0c6aec92de5e3fd7
[   65.617672]  t5 : fff78f60608fcfff t6 : 0000000000000078
[   65.618088] status: 0000000000000120 badaddr: ffffffd0003bbde8 cause: 000000000000000d
[   65.618621] [<ffffffff800048a4>] get_wchan+0x5c/0x88
[   65.619008] [<ffffffff8022da88>] do_task_stat+0x7a2/0xa46
[   65.619325] [<ffffffff8022e87e>] proc_tgid_stat+0xe/0x16
[   65.619637] [<ffffffff80227dd6>] proc_single_show+0x46/0x96
[   65.619979] [<ffffffff801ccb1e>] seq_read_iter+0x190/0x31e
[   65.620341] [<ffffffff801ccd70>] seq_read+0xc4/0x104
[   65.620633] [<ffffffff801a6bfe>] vfs_read+0x6a/0x112
[   65.620922] [<ffffffff801a701c>] ksys_read+0x54/0xbe
[   65.621206] [<ffffffff801a7094>] sys_read+0xe/0x16
[   65.621474] [<ffffffff8000303e>] ret_from_syscall+0x0/0x2
[   65.622169] ---[ end trace f24856ed2b8789c5 ]---
[   65.622832] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b

Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
---
 arch/riscv/kernel/stacktrace.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/arch/riscv/kernel/stacktrace.c b/arch/riscv/kernel/stacktrace.c
index ff467b98c3e3..ac7593607fa6 100644
--- a/arch/riscv/kernel/stacktrace.c
+++ b/arch/riscv/kernel/stacktrace.c
@@ -132,8 +132,12 @@ unsigned long get_wchan(struct task_struct *task)
 {
 	unsigned long pc = 0;
 
-	if (likely(task && task != current && !task_is_running(task)))
+	if (likely(task && task != current && !task_is_running(task))) {
+		if (!try_get_task_stack(task))
+			return 0;
 		walk_stackframe(task, NULL, save_wchan, &pc);
+		put_task_stack(task);
+	}
 	return pc;
 }
 
-- 
2.32.0



_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

             reply	other threads:[~2021-07-23  0:29 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-07-23  0:22 Jisheng Zhang [this message]
2021-07-23  0:22 ` [PATCH] riscv: stacktrace: pin the task's stack in get_wchan Jisheng Zhang
2021-07-24  0:58 ` Palmer Dabbelt
2021-07-24  0:58   ` Palmer Dabbelt

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210723082226.7b7b4707@xhacker \
    --to=jszhang3@mail.ustc.edu.cn \
    --cc=aou@eecs.berkeley.edu \
    --cc=atishp@atishpatra.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-riscv@lists.infradead.org \
    --cc=palmer@dabbelt.com \
    --cc=paul.walmsley@sifive.com \
    --cc=schwab@linux-m68k.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.