From: Martin Kepplinger <martin.kepplinger@puri.sm> To: laurent.pinchart@ideasonboard.com, shawnguo@kernel.org Cc: devicetree@vger.kernel.org, festevam@gmail.com, kernel@pengutronix.de, kernel@puri.sm, krzk@kernel.org, linux-arm-kernel@lists.infradead.org, linux-imx@nxp.com, linux-kernel@vger.kernel.org, linux-media@vger.kernel.org, linux-staging@lists.linux.dev, m.felsch@pengutronix.de, mchehab@kernel.org, phone-devel@vger.kernel.org, robh@kernel.org, slongerbeam@gmail.com, Martin Kepplinger <martin.kepplinger@puri.sm> Subject: [PATCH v9 0/3] media: imx: add support for imx8mq MIPI RX Date: Mon, 26 Jul 2021 10:21:14 +0200 [thread overview] Message-ID: <20210726082117.2423597-1-martin.kepplinger@puri.sm> (raw) hi, This patch series adds a driver for the i.MX8MQ CSI MIPI receiver / controller. It includes the driver, the dt-bindings and the DT addition to the SoC dtsi. I test it using libcamera. Thanks to Laurent who helped a lot. I'm happy for any feedback, martin revision history ---------------- v9: (thank you Laurent) * improve getting the esc clock rate for hs_settle v8: (thank you Laurent) * calculate hs_settle for any clk rate and mode * add reviewed-by tag https://lore.kernel.org/linux-media/20210723101217.1954805-1-martin.kepplinger@puri.sm/T/ v7: (thank you Laurent and Rob) * fix the binding example (include the reset driver) * use pm_runtime_resume_and_get() * fix some logic in init_cfg() * add some useful code comments and fix minor bits found by Laurent in v6 https://lore.kernel.org/linux-media/20210716102244.581182-1-martin.kepplinger@puri.sm/T/#t v6: (thank you Laurent and Rob) * add reviewed-by tag to binding * statically allocate clk_bulk_data * fix how the hs_settle value is applied * remove s_power calls * remove the link_setup() callback implementation and make the link immutable * more cleanups according to Laurents' review from v5 https://lore.kernel.org/linux-media/20210714111931.324485-1-martin.kepplinger@puri.sm/ v5: (thank you Laurent) * fix reset usage by using the already supported reset controller driver * remove clko2 (totally unrelated clock / had been included by accident) * rename pxl clock to ui https://lore.kernel.org/linux-media/20210618095753.114557-1-martin.kepplinger@puri.sm/ v4: (thank you Rob and Marco) * create fsl,mipi-phy-gpr custom dt property instead of confusing "phy" * add imx8mq-specific compatibile to imx8mq.dtsi for future use https://lore.kernel.org/linux-media/20210614121522.2944593-1-martin.kepplinger@puri.sm/ v3: (thank you, Rob and Laurent) among minor other things according to v2 review, changes include: * better describe the clocks * rename DT property "phy-reset" to "reset" and "phy-gpr" to "phy" https://lore.kernel.org/linux-media/20210608104128.1616028-1-martin.kepplinger@puri.sm/T/#t v2: (thank you, Dan and Guido) among fixes according to v1 reviews, changes include: * remove status property from dt-bindings example * define a few bits in order to have less magic values * use "imx8mq_mipi_csi_" as local function prefix * read DT properties only during probe() * remove dead code (log_status) * add imx8mq_mipi_csi_release_icc() * fix imx8mq_mipi_csi_init_icc() https://lore.kernel.org/linux-media/20210531112326.90094-1-martin.kepplinger@puri.sm/ v1: https://lore.kernel.org/linux-media/20210527075407.3180744-1-martin.kepplinger@puri.sm/T/#t Martin Kepplinger (3): dt-bindings: media: document the nxp,imx8mq-mipi-csi2 receiver phy and controller media: imx: add a driver for i.MX8MQ mipi csi rx phy and controller arm64: dts: imx8mq: add mipi csi phy and csi bridge descriptions .../bindings/media/nxp,imx8mq-mipi-csi2.yaml | 174 ++++ arch/arm64/boot/dts/freescale/imx8mq.dtsi | 104 ++ drivers/staging/media/imx/Makefile | 1 + drivers/staging/media/imx/imx8mq-mipi-csi2.c | 976 ++++++++++++++++++ 4 files changed, 1255 insertions(+) create mode 100644 Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml create mode 100644 drivers/staging/media/imx/imx8mq-mipi-csi2.c -- 2.30.2
WARNING: multiple messages have this Message-ID (diff)
From: Martin Kepplinger <martin.kepplinger@puri.sm> To: laurent.pinchart@ideasonboard.com, shawnguo@kernel.org Cc: devicetree@vger.kernel.org, festevam@gmail.com, kernel@pengutronix.de, kernel@puri.sm, krzk@kernel.org, linux-arm-kernel@lists.infradead.org, linux-imx@nxp.com, linux-kernel@vger.kernel.org, linux-media@vger.kernel.org, linux-staging@lists.linux.dev, m.felsch@pengutronix.de, mchehab@kernel.org, phone-devel@vger.kernel.org, robh@kernel.org, slongerbeam@gmail.com, Martin Kepplinger <martin.kepplinger@puri.sm> Subject: [PATCH v9 0/3] media: imx: add support for imx8mq MIPI RX Date: Mon, 26 Jul 2021 10:21:14 +0200 [thread overview] Message-ID: <20210726082117.2423597-1-martin.kepplinger@puri.sm> (raw) hi, This patch series adds a driver for the i.MX8MQ CSI MIPI receiver / controller. It includes the driver, the dt-bindings and the DT addition to the SoC dtsi. I test it using libcamera. Thanks to Laurent who helped a lot. I'm happy for any feedback, martin revision history ---------------- v9: (thank you Laurent) * improve getting the esc clock rate for hs_settle v8: (thank you Laurent) * calculate hs_settle for any clk rate and mode * add reviewed-by tag https://lore.kernel.org/linux-media/20210723101217.1954805-1-martin.kepplinger@puri.sm/T/ v7: (thank you Laurent and Rob) * fix the binding example (include the reset driver) * use pm_runtime_resume_and_get() * fix some logic in init_cfg() * add some useful code comments and fix minor bits found by Laurent in v6 https://lore.kernel.org/linux-media/20210716102244.581182-1-martin.kepplinger@puri.sm/T/#t v6: (thank you Laurent and Rob) * add reviewed-by tag to binding * statically allocate clk_bulk_data * fix how the hs_settle value is applied * remove s_power calls * remove the link_setup() callback implementation and make the link immutable * more cleanups according to Laurents' review from v5 https://lore.kernel.org/linux-media/20210714111931.324485-1-martin.kepplinger@puri.sm/ v5: (thank you Laurent) * fix reset usage by using the already supported reset controller driver * remove clko2 (totally unrelated clock / had been included by accident) * rename pxl clock to ui https://lore.kernel.org/linux-media/20210618095753.114557-1-martin.kepplinger@puri.sm/ v4: (thank you Rob and Marco) * create fsl,mipi-phy-gpr custom dt property instead of confusing "phy" * add imx8mq-specific compatibile to imx8mq.dtsi for future use https://lore.kernel.org/linux-media/20210614121522.2944593-1-martin.kepplinger@puri.sm/ v3: (thank you, Rob and Laurent) among minor other things according to v2 review, changes include: * better describe the clocks * rename DT property "phy-reset" to "reset" and "phy-gpr" to "phy" https://lore.kernel.org/linux-media/20210608104128.1616028-1-martin.kepplinger@puri.sm/T/#t v2: (thank you, Dan and Guido) among fixes according to v1 reviews, changes include: * remove status property from dt-bindings example * define a few bits in order to have less magic values * use "imx8mq_mipi_csi_" as local function prefix * read DT properties only during probe() * remove dead code (log_status) * add imx8mq_mipi_csi_release_icc() * fix imx8mq_mipi_csi_init_icc() https://lore.kernel.org/linux-media/20210531112326.90094-1-martin.kepplinger@puri.sm/ v1: https://lore.kernel.org/linux-media/20210527075407.3180744-1-martin.kepplinger@puri.sm/T/#t Martin Kepplinger (3): dt-bindings: media: document the nxp,imx8mq-mipi-csi2 receiver phy and controller media: imx: add a driver for i.MX8MQ mipi csi rx phy and controller arm64: dts: imx8mq: add mipi csi phy and csi bridge descriptions .../bindings/media/nxp,imx8mq-mipi-csi2.yaml | 174 ++++ arch/arm64/boot/dts/freescale/imx8mq.dtsi | 104 ++ drivers/staging/media/imx/Makefile | 1 + drivers/staging/media/imx/imx8mq-mipi-csi2.c | 976 ++++++++++++++++++ 4 files changed, 1255 insertions(+) create mode 100644 Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml create mode 100644 drivers/staging/media/imx/imx8mq-mipi-csi2.c -- 2.30.2 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2021-07-26 8:21 UTC|newest] Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-07-26 8:21 Martin Kepplinger [this message] 2021-07-26 8:21 ` [PATCH v9 0/3] media: imx: add support for imx8mq MIPI RX Martin Kepplinger 2021-07-26 8:21 ` [PATCH v9 1/3] dt-bindings: media: document the nxp,imx8mq-mipi-csi2 receiver phy and controller Martin Kepplinger 2021-07-26 8:21 ` [PATCH v9 1/3] dt-bindings: media: document the nxp, imx8mq-mipi-csi2 " Martin Kepplinger 2021-07-26 8:21 ` [PATCH v9 2/3] media: imx: add a driver for i.MX8MQ mipi csi rx " Martin Kepplinger 2021-07-26 8:21 ` Martin Kepplinger 2021-07-28 5:02 ` Dafna Hirschfeld 2021-07-28 5:02 ` Dafna Hirschfeld 2021-07-28 5:51 ` Laurent Pinchart 2021-07-28 5:51 ` Laurent Pinchart 2021-07-26 8:21 ` [PATCH v9 3/3] arm64: dts: imx8mq: add mipi csi phy and csi bridge descriptions Martin Kepplinger 2021-07-26 8:21 ` Martin Kepplinger 2021-08-04 9:08 ` Shawn Guo 2021-08-04 9:08 ` Shawn Guo 2021-07-27 1:00 ` [PATCH v9 0/3] media: imx: add support for imx8mq MIPI RX Laurent Pinchart 2021-07-27 1:00 ` Laurent Pinchart 2021-08-04 9:09 ` Shawn Guo 2021-08-04 9:09 ` Shawn Guo
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20210726082117.2423597-1-martin.kepplinger@puri.sm \ --to=martin.kepplinger@puri.sm \ --cc=devicetree@vger.kernel.org \ --cc=festevam@gmail.com \ --cc=kernel@pengutronix.de \ --cc=kernel@puri.sm \ --cc=krzk@kernel.org \ --cc=laurent.pinchart@ideasonboard.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-imx@nxp.com \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-media@vger.kernel.org \ --cc=linux-staging@lists.linux.dev \ --cc=m.felsch@pengutronix.de \ --cc=mchehab@kernel.org \ --cc=phone-devel@vger.kernel.org \ --cc=robh@kernel.org \ --cc=shawnguo@kernel.org \ --cc=slongerbeam@gmail.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.