From: Arnd Bergmann <arnd@kernel.org>
To: Russell King <linux@armlinux.org.uk>
Cc: Arnd Bergmann <arnd@arndb.de>,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, linux-arch@vger.kernel.org,
linux-mm@kvack.org, Alexander Viro <viro@zeniv.linux.org.uk>,
Linus Walleij <linus.walleij@linaro.org>
Subject: [PATCH v5 08/10] ARM: uaccess: add __{get,put}_kernel_nofault
Date: Mon, 26 Jul 2021 16:11:39 +0200 [thread overview]
Message-ID: <20210726141141.2839385-9-arnd@kernel.org> (raw)
In-Reply-To: <20210726141141.2839385-1-arnd@kernel.org>
From: Arnd Bergmann <arnd@arndb.de>
These mimic the behavior of get_user and put_user, except
for domain switching, address limit checking and handling
of mismatched sizes, none of which are relevant here.
To work with pre-Armv6 kernels, this has to avoid TUSER()
inside of the new macros, the new approach passes the "t"
string along with the opcode, which is a bit uglier but
avoids duplicating more code.
As there is no __get_user_asm_dword(), I work around it
by copying 32 bit at a time, which is possible because
the output size is known.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
arch/arm/include/asm/uaccess.h | 123 ++++++++++++++++++++++-----------
1 file changed, 83 insertions(+), 40 deletions(-)
diff --git a/arch/arm/include/asm/uaccess.h b/arch/arm/include/asm/uaccess.h
index a13d90206472..4f60638755c4 100644
--- a/arch/arm/include/asm/uaccess.h
+++ b/arch/arm/include/asm/uaccess.h
@@ -308,11 +308,11 @@ static inline void set_fs(mm_segment_t fs)
#define __get_user(x, ptr) \
({ \
long __gu_err = 0; \
- __get_user_err((x), (ptr), __gu_err); \
+ __get_user_err((x), (ptr), __gu_err, TUSER()); \
__gu_err; \
})
-#define __get_user_err(x, ptr, err) \
+#define __get_user_err(x, ptr, err, __t) \
do { \
unsigned long __gu_addr = (unsigned long)(ptr); \
unsigned long __gu_val; \
@@ -321,18 +321,19 @@ do { \
might_fault(); \
__ua_flags = uaccess_save_and_enable(); \
switch (sizeof(*(ptr))) { \
- case 1: __get_user_asm_byte(__gu_val, __gu_addr, err); break; \
- case 2: __get_user_asm_half(__gu_val, __gu_addr, err); break; \
- case 4: __get_user_asm_word(__gu_val, __gu_addr, err); break; \
+ case 1: __get_user_asm_byte(__gu_val, __gu_addr, err, __t); break; \
+ case 2: __get_user_asm_half(__gu_val, __gu_addr, err, __t); break; \
+ case 4: __get_user_asm_word(__gu_val, __gu_addr, err, __t); break; \
default: (__gu_val) = __get_user_bad(); \
} \
uaccess_restore(__ua_flags); \
(x) = (__typeof__(*(ptr)))__gu_val; \
} while (0)
+#endif
#define __get_user_asm(x, addr, err, instr) \
__asm__ __volatile__( \
- "1: " TUSER(instr) " %1, [%2], #0\n" \
+ "1: " instr " %1, [%2], #0\n" \
"2:\n" \
" .pushsection .text.fixup,\"ax\"\n" \
" .align 2\n" \
@@ -348,40 +349,38 @@ do { \
: "r" (addr), "i" (-EFAULT) \
: "cc")
-#define __get_user_asm_byte(x, addr, err) \
- __get_user_asm(x, addr, err, ldrb)
+#define __get_user_asm_byte(x, addr, err, __t) \
+ __get_user_asm(x, addr, err, "ldrb" __t)
#if __LINUX_ARM_ARCH__ >= 6
-#define __get_user_asm_half(x, addr, err) \
- __get_user_asm(x, addr, err, ldrh)
+#define __get_user_asm_half(x, addr, err, __t) \
+ __get_user_asm(x, addr, err, "ldrh" __t)
#else
#ifndef __ARMEB__
-#define __get_user_asm_half(x, __gu_addr, err) \
+#define __get_user_asm_half(x, __gu_addr, err, __t) \
({ \
unsigned long __b1, __b2; \
- __get_user_asm_byte(__b1, __gu_addr, err); \
- __get_user_asm_byte(__b2, __gu_addr + 1, err); \
+ __get_user_asm_byte(__b1, __gu_addr, err, __t); \
+ __get_user_asm_byte(__b2, __gu_addr + 1, err, __t); \
(x) = __b1 | (__b2 << 8); \
})
#else
-#define __get_user_asm_half(x, __gu_addr, err) \
+#define __get_user_asm_half(x, __gu_addr, err, __t) \
({ \
unsigned long __b1, __b2; \
- __get_user_asm_byte(__b1, __gu_addr, err); \
- __get_user_asm_byte(__b2, __gu_addr + 1, err); \
+ __get_user_asm_byte(__b1, __gu_addr, err, __t); \
+ __get_user_asm_byte(__b2, __gu_addr + 1, err, __t); \
(x) = (__b1 << 8) | __b2; \
})
#endif
#endif /* __LINUX_ARM_ARCH__ >= 6 */
-#define __get_user_asm_word(x, addr, err) \
- __get_user_asm(x, addr, err, ldr)
-#endif
-
+#define __get_user_asm_word(x, addr, err, __t) \
+ __get_user_asm(x, addr, err, "ldr" __t)
#define __put_user_switch(x, ptr, __err, __fn) \
do { \
@@ -425,7 +424,7 @@ do { \
#define __put_user_nocheck(x, __pu_ptr, __err, __size) \
do { \
unsigned long __pu_addr = (unsigned long)__pu_ptr; \
- __put_user_nocheck_##__size(x, __pu_addr, __err); \
+ __put_user_nocheck_##__size(x, __pu_addr, __err, TUSER());\
} while (0)
#define __put_user_nocheck_1 __put_user_asm_byte
@@ -433,9 +432,11 @@ do { \
#define __put_user_nocheck_4 __put_user_asm_word
#define __put_user_nocheck_8 __put_user_asm_dword
+#endif /* !CONFIG_CPU_SPECTRE */
+
#define __put_user_asm(x, __pu_addr, err, instr) \
__asm__ __volatile__( \
- "1: " TUSER(instr) " %1, [%2], #0\n" \
+ "1: " instr " %1, [%2], #0\n" \
"2:\n" \
" .pushsection .text.fixup,\"ax\"\n" \
" .align 2\n" \
@@ -450,36 +451,36 @@ do { \
: "r" (x), "r" (__pu_addr), "i" (-EFAULT) \
: "cc")
-#define __put_user_asm_byte(x, __pu_addr, err) \
- __put_user_asm(x, __pu_addr, err, strb)
+#define __put_user_asm_byte(x, __pu_addr, err, __t) \
+ __put_user_asm(x, __pu_addr, err, "strb" __t)
#if __LINUX_ARM_ARCH__ >= 6
-#define __put_user_asm_half(x, __pu_addr, err) \
- __put_user_asm(x, __pu_addr, err, strh)
+#define __put_user_asm_half(x, __pu_addr, err, __t) \
+ __put_user_asm(x, __pu_addr, err, "strh" __t)
#else
#ifndef __ARMEB__
-#define __put_user_asm_half(x, __pu_addr, err) \
+#define __put_user_asm_half(x, __pu_addr, err, __t) \
({ \
unsigned long __temp = (__force unsigned long)(x); \
- __put_user_asm_byte(__temp, __pu_addr, err); \
- __put_user_asm_byte(__temp >> 8, __pu_addr + 1, err); \
+ __put_user_asm_byte(__temp, __pu_addr, err, __t); \
+ __put_user_asm_byte(__temp >> 8, __pu_addr + 1, err, __t);\
})
#else
-#define __put_user_asm_half(x, __pu_addr, err) \
+#define __put_user_asm_half(x, __pu_addr, err, __t) \
({ \
unsigned long __temp = (__force unsigned long)(x); \
- __put_user_asm_byte(__temp >> 8, __pu_addr, err); \
- __put_user_asm_byte(__temp, __pu_addr + 1, err); \
+ __put_user_asm_byte(__temp >> 8, __pu_addr, err, __t); \
+ __put_user_asm_byte(__temp, __pu_addr + 1, err, __t); \
})
#endif
#endif /* __LINUX_ARM_ARCH__ >= 6 */
-#define __put_user_asm_word(x, __pu_addr, err) \
- __put_user_asm(x, __pu_addr, err, str)
+#define __put_user_asm_word(x, __pu_addr, err, __t) \
+ __put_user_asm(x, __pu_addr, err, "str" __t)
#ifndef __ARMEB__
#define __reg_oper0 "%R2"
@@ -489,12 +490,12 @@ do { \
#define __reg_oper1 "%R2"
#endif
-#define __put_user_asm_dword(x, __pu_addr, err) \
+#define __put_user_asm_dword(x, __pu_addr, err, __t) \
__asm__ __volatile__( \
- ARM( "1: " TUSER(str) " " __reg_oper1 ", [%1], #4\n" ) \
- ARM( "2: " TUSER(str) " " __reg_oper0 ", [%1]\n" ) \
- THUMB( "1: " TUSER(str) " " __reg_oper1 ", [%1]\n" ) \
- THUMB( "2: " TUSER(str) " " __reg_oper0 ", [%1, #4]\n" ) \
+ ARM( "1: str" __t " " __reg_oper1 ", [%1], #4\n" ) \
+ ARM( "2: str" __t " " __reg_oper0 ", [%1]\n" ) \
+ THUMB( "1: str" __t " " __reg_oper1 ", [%1]\n" ) \
+ THUMB( "2: str" __t " " __reg_oper0 ", [%1, #4]\n" ) \
"3:\n" \
" .pushsection .text.fixup,\"ax\"\n" \
" .align 2\n" \
@@ -510,7 +511,49 @@ do { \
: "r" (x), "i" (-EFAULT) \
: "cc")
-#endif /* !CONFIG_CPU_SPECTRE */
+#define HAVE_GET_KERNEL_NOFAULT
+
+#define __get_kernel_nofault(dst, src, type, err_label) \
+do { \
+ const type *__pk_ptr = (src); \
+ unsigned long __src = (unsigned long)(__pk_ptr); \
+ type __val; \
+ int __err = 0; \
+ switch (sizeof(type)) { \
+ case 1: __get_user_asm_byte(__val, __src, __err, ""); break; \
+ case 2: __get_user_asm_half(__val, __src, __err, ""); break; \
+ case 4: __get_user_asm_word(__val, __src, __err, ""); break; \
+ case 8: { \
+ u32 *__v32 = (u32*)&__val; \
+ __get_user_asm_word(__v32[0], __src, __err, ""); \
+ if (__err) \
+ break; \
+ __get_user_asm_word(__v32[1], __src+4, __err, ""); \
+ break; \
+ } \
+ default: __err = __get_user_bad(); break; \
+ } \
+ *(type *)(dst) = __val; \
+ if (__err) \
+ goto err_label; \
+} while (0)
+
+#define __put_kernel_nofault(dst, src, type, err_label) \
+do { \
+ const type *__pk_ptr = (dst); \
+ unsigned long __dst = (unsigned long)__pk_ptr; \
+ int __err = 0; \
+ type __val = *(type *)src; \
+ switch (sizeof(type)) { \
+ case 1: __put_user_asm_byte(__val, __dst, __err, ""); break; \
+ case 2: __put_user_asm_half(__val, __dst, __err, ""); break; \
+ case 4: __put_user_asm_word(__val, __dst, __err, ""); break; \
+ case 8: __put_user_asm_dword(__val, __dst, __err, ""); break; \
+ default: __err = __put_user_bad(); break; \
+ } \
+ if (__err) \
+ goto err_label; \
+} while (0)
#ifdef CONFIG_MMU
extern unsigned long __must_check
--
2.29.2
WARNING: multiple messages have this Message-ID (diff)
From: Arnd Bergmann <arnd@kernel.org>
To: Russell King <linux@armlinux.org.uk>
Cc: Arnd Bergmann <arnd@arndb.de>,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, linux-arch@vger.kernel.org,
linux-mm@kvack.org, Alexander Viro <viro@zeniv.linux.org.uk>,
Linus Walleij <linus.walleij@linaro.org>
Subject: [PATCH v5 08/10] ARM: uaccess: add __{get,put}_kernel_nofault
Date: Mon, 26 Jul 2021 16:11:39 +0200 [thread overview]
Message-ID: <20210726141141.2839385-9-arnd@kernel.org> (raw)
In-Reply-To: <20210726141141.2839385-1-arnd@kernel.org>
From: Arnd Bergmann <arnd@arndb.de>
These mimic the behavior of get_user and put_user, except
for domain switching, address limit checking and handling
of mismatched sizes, none of which are relevant here.
To work with pre-Armv6 kernels, this has to avoid TUSER()
inside of the new macros, the new approach passes the "t"
string along with the opcode, which is a bit uglier but
avoids duplicating more code.
As there is no __get_user_asm_dword(), I work around it
by copying 32 bit at a time, which is possible because
the output size is known.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
arch/arm/include/asm/uaccess.h | 123 ++++++++++++++++++++++-----------
1 file changed, 83 insertions(+), 40 deletions(-)
diff --git a/arch/arm/include/asm/uaccess.h b/arch/arm/include/asm/uaccess.h
index a13d90206472..4f60638755c4 100644
--- a/arch/arm/include/asm/uaccess.h
+++ b/arch/arm/include/asm/uaccess.h
@@ -308,11 +308,11 @@ static inline void set_fs(mm_segment_t fs)
#define __get_user(x, ptr) \
({ \
long __gu_err = 0; \
- __get_user_err((x), (ptr), __gu_err); \
+ __get_user_err((x), (ptr), __gu_err, TUSER()); \
__gu_err; \
})
-#define __get_user_err(x, ptr, err) \
+#define __get_user_err(x, ptr, err, __t) \
do { \
unsigned long __gu_addr = (unsigned long)(ptr); \
unsigned long __gu_val; \
@@ -321,18 +321,19 @@ do { \
might_fault(); \
__ua_flags = uaccess_save_and_enable(); \
switch (sizeof(*(ptr))) { \
- case 1: __get_user_asm_byte(__gu_val, __gu_addr, err); break; \
- case 2: __get_user_asm_half(__gu_val, __gu_addr, err); break; \
- case 4: __get_user_asm_word(__gu_val, __gu_addr, err); break; \
+ case 1: __get_user_asm_byte(__gu_val, __gu_addr, err, __t); break; \
+ case 2: __get_user_asm_half(__gu_val, __gu_addr, err, __t); break; \
+ case 4: __get_user_asm_word(__gu_val, __gu_addr, err, __t); break; \
default: (__gu_val) = __get_user_bad(); \
} \
uaccess_restore(__ua_flags); \
(x) = (__typeof__(*(ptr)))__gu_val; \
} while (0)
+#endif
#define __get_user_asm(x, addr, err, instr) \
__asm__ __volatile__( \
- "1: " TUSER(instr) " %1, [%2], #0\n" \
+ "1: " instr " %1, [%2], #0\n" \
"2:\n" \
" .pushsection .text.fixup,\"ax\"\n" \
" .align 2\n" \
@@ -348,40 +349,38 @@ do { \
: "r" (addr), "i" (-EFAULT) \
: "cc")
-#define __get_user_asm_byte(x, addr, err) \
- __get_user_asm(x, addr, err, ldrb)
+#define __get_user_asm_byte(x, addr, err, __t) \
+ __get_user_asm(x, addr, err, "ldrb" __t)
#if __LINUX_ARM_ARCH__ >= 6
-#define __get_user_asm_half(x, addr, err) \
- __get_user_asm(x, addr, err, ldrh)
+#define __get_user_asm_half(x, addr, err, __t) \
+ __get_user_asm(x, addr, err, "ldrh" __t)
#else
#ifndef __ARMEB__
-#define __get_user_asm_half(x, __gu_addr, err) \
+#define __get_user_asm_half(x, __gu_addr, err, __t) \
({ \
unsigned long __b1, __b2; \
- __get_user_asm_byte(__b1, __gu_addr, err); \
- __get_user_asm_byte(__b2, __gu_addr + 1, err); \
+ __get_user_asm_byte(__b1, __gu_addr, err, __t); \
+ __get_user_asm_byte(__b2, __gu_addr + 1, err, __t); \
(x) = __b1 | (__b2 << 8); \
})
#else
-#define __get_user_asm_half(x, __gu_addr, err) \
+#define __get_user_asm_half(x, __gu_addr, err, __t) \
({ \
unsigned long __b1, __b2; \
- __get_user_asm_byte(__b1, __gu_addr, err); \
- __get_user_asm_byte(__b2, __gu_addr + 1, err); \
+ __get_user_asm_byte(__b1, __gu_addr, err, __t); \
+ __get_user_asm_byte(__b2, __gu_addr + 1, err, __t); \
(x) = (__b1 << 8) | __b2; \
})
#endif
#endif /* __LINUX_ARM_ARCH__ >= 6 */
-#define __get_user_asm_word(x, addr, err) \
- __get_user_asm(x, addr, err, ldr)
-#endif
-
+#define __get_user_asm_word(x, addr, err, __t) \
+ __get_user_asm(x, addr, err, "ldr" __t)
#define __put_user_switch(x, ptr, __err, __fn) \
do { \
@@ -425,7 +424,7 @@ do { \
#define __put_user_nocheck(x, __pu_ptr, __err, __size) \
do { \
unsigned long __pu_addr = (unsigned long)__pu_ptr; \
- __put_user_nocheck_##__size(x, __pu_addr, __err); \
+ __put_user_nocheck_##__size(x, __pu_addr, __err, TUSER());\
} while (0)
#define __put_user_nocheck_1 __put_user_asm_byte
@@ -433,9 +432,11 @@ do { \
#define __put_user_nocheck_4 __put_user_asm_word
#define __put_user_nocheck_8 __put_user_asm_dword
+#endif /* !CONFIG_CPU_SPECTRE */
+
#define __put_user_asm(x, __pu_addr, err, instr) \
__asm__ __volatile__( \
- "1: " TUSER(instr) " %1, [%2], #0\n" \
+ "1: " instr " %1, [%2], #0\n" \
"2:\n" \
" .pushsection .text.fixup,\"ax\"\n" \
" .align 2\n" \
@@ -450,36 +451,36 @@ do { \
: "r" (x), "r" (__pu_addr), "i" (-EFAULT) \
: "cc")
-#define __put_user_asm_byte(x, __pu_addr, err) \
- __put_user_asm(x, __pu_addr, err, strb)
+#define __put_user_asm_byte(x, __pu_addr, err, __t) \
+ __put_user_asm(x, __pu_addr, err, "strb" __t)
#if __LINUX_ARM_ARCH__ >= 6
-#define __put_user_asm_half(x, __pu_addr, err) \
- __put_user_asm(x, __pu_addr, err, strh)
+#define __put_user_asm_half(x, __pu_addr, err, __t) \
+ __put_user_asm(x, __pu_addr, err, "strh" __t)
#else
#ifndef __ARMEB__
-#define __put_user_asm_half(x, __pu_addr, err) \
+#define __put_user_asm_half(x, __pu_addr, err, __t) \
({ \
unsigned long __temp = (__force unsigned long)(x); \
- __put_user_asm_byte(__temp, __pu_addr, err); \
- __put_user_asm_byte(__temp >> 8, __pu_addr + 1, err); \
+ __put_user_asm_byte(__temp, __pu_addr, err, __t); \
+ __put_user_asm_byte(__temp >> 8, __pu_addr + 1, err, __t);\
})
#else
-#define __put_user_asm_half(x, __pu_addr, err) \
+#define __put_user_asm_half(x, __pu_addr, err, __t) \
({ \
unsigned long __temp = (__force unsigned long)(x); \
- __put_user_asm_byte(__temp >> 8, __pu_addr, err); \
- __put_user_asm_byte(__temp, __pu_addr + 1, err); \
+ __put_user_asm_byte(__temp >> 8, __pu_addr, err, __t); \
+ __put_user_asm_byte(__temp, __pu_addr + 1, err, __t); \
})
#endif
#endif /* __LINUX_ARM_ARCH__ >= 6 */
-#define __put_user_asm_word(x, __pu_addr, err) \
- __put_user_asm(x, __pu_addr, err, str)
+#define __put_user_asm_word(x, __pu_addr, err, __t) \
+ __put_user_asm(x, __pu_addr, err, "str" __t)
#ifndef __ARMEB__
#define __reg_oper0 "%R2"
@@ -489,12 +490,12 @@ do { \
#define __reg_oper1 "%R2"
#endif
-#define __put_user_asm_dword(x, __pu_addr, err) \
+#define __put_user_asm_dword(x, __pu_addr, err, __t) \
__asm__ __volatile__( \
- ARM( "1: " TUSER(str) " " __reg_oper1 ", [%1], #4\n" ) \
- ARM( "2: " TUSER(str) " " __reg_oper0 ", [%1]\n" ) \
- THUMB( "1: " TUSER(str) " " __reg_oper1 ", [%1]\n" ) \
- THUMB( "2: " TUSER(str) " " __reg_oper0 ", [%1, #4]\n" ) \
+ ARM( "1: str" __t " " __reg_oper1 ", [%1], #4\n" ) \
+ ARM( "2: str" __t " " __reg_oper0 ", [%1]\n" ) \
+ THUMB( "1: str" __t " " __reg_oper1 ", [%1]\n" ) \
+ THUMB( "2: str" __t " " __reg_oper0 ", [%1, #4]\n" ) \
"3:\n" \
" .pushsection .text.fixup,\"ax\"\n" \
" .align 2\n" \
@@ -510,7 +511,49 @@ do { \
: "r" (x), "i" (-EFAULT) \
: "cc")
-#endif /* !CONFIG_CPU_SPECTRE */
+#define HAVE_GET_KERNEL_NOFAULT
+
+#define __get_kernel_nofault(dst, src, type, err_label) \
+do { \
+ const type *__pk_ptr = (src); \
+ unsigned long __src = (unsigned long)(__pk_ptr); \
+ type __val; \
+ int __err = 0; \
+ switch (sizeof(type)) { \
+ case 1: __get_user_asm_byte(__val, __src, __err, ""); break; \
+ case 2: __get_user_asm_half(__val, __src, __err, ""); break; \
+ case 4: __get_user_asm_word(__val, __src, __err, ""); break; \
+ case 8: { \
+ u32 *__v32 = (u32*)&__val; \
+ __get_user_asm_word(__v32[0], __src, __err, ""); \
+ if (__err) \
+ break; \
+ __get_user_asm_word(__v32[1], __src+4, __err, ""); \
+ break; \
+ } \
+ default: __err = __get_user_bad(); break; \
+ } \
+ *(type *)(dst) = __val; \
+ if (__err) \
+ goto err_label; \
+} while (0)
+
+#define __put_kernel_nofault(dst, src, type, err_label) \
+do { \
+ const type *__pk_ptr = (dst); \
+ unsigned long __dst = (unsigned long)__pk_ptr; \
+ int __err = 0; \
+ type __val = *(type *)src; \
+ switch (sizeof(type)) { \
+ case 1: __put_user_asm_byte(__val, __dst, __err, ""); break; \
+ case 2: __put_user_asm_half(__val, __dst, __err, ""); break; \
+ case 4: __put_user_asm_word(__val, __dst, __err, ""); break; \
+ case 8: __put_user_asm_dword(__val, __dst, __err, ""); break; \
+ default: __err = __put_user_bad(); break; \
+ } \
+ if (__err) \
+ goto err_label; \
+} while (0)
#ifdef CONFIG_MMU
extern unsigned long __must_check
--
2.29.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2021-07-26 14:12 UTC|newest]
Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-07-26 14:11 [PATCH v5 00/10] ARM: remove set_fs callers and implementation Arnd Bergmann
2021-07-26 14:11 ` Arnd Bergmann
2021-07-26 14:11 ` [PATCH v5 01/10] mm/maccess: fix unaligned copy_{from,to}_kernel_nofault Arnd Bergmann
2021-07-26 14:11 ` [PATCH v5 01/10] mm/maccess: fix unaligned copy_{from, to}_kernel_nofault Arnd Bergmann
2021-07-26 14:11 ` [PATCH v5 02/10] ARM: traps: use get_kernel_nofault instead of set_fs() Arnd Bergmann
2021-07-26 14:11 ` Arnd Bergmann
2021-07-26 14:11 ` [PATCH v5 03/10] ARM: oabi-compat: add epoll_pwait handler Arnd Bergmann
2021-07-26 14:11 ` Arnd Bergmann
2021-07-26 14:11 ` [PATCH v5 04/10] ARM: syscall: always store thread_info->abi_syscall Arnd Bergmann
2021-07-26 14:11 ` Arnd Bergmann
2023-08-03 23:17 ` Kees Cook
2023-08-03 23:17 ` Kees Cook
2023-08-04 8:13 ` Kees Cook
2023-08-04 8:13 ` Kees Cook
2023-08-09 19:42 ` Arnd Bergmann
2023-08-09 19:42 ` Arnd Bergmann
2021-07-26 14:11 ` [PATCH v5 05/10] ARM: oabi-compat: rework epoll_wait/epoll_pwait emulation Arnd Bergmann
2021-07-26 14:11 ` Arnd Bergmann
2021-07-26 14:11 ` [PATCH v5 06/10] ARM: oabi-compat: rework sys_semtimedop emulation Arnd Bergmann
2021-07-26 14:11 ` Arnd Bergmann
2021-07-26 14:11 ` [PATCH v5 07/10] ARM: oabi-compat: rework fcntl64() emulation Arnd Bergmann
2021-07-26 14:11 ` Arnd Bergmann
2021-07-26 14:11 ` Arnd Bergmann [this message]
2021-07-26 14:11 ` [PATCH v5 08/10] ARM: uaccess: add __{get,put}_kernel_nofault Arnd Bergmann
2022-01-12 17:29 ` Daniel Thompson
2022-01-12 17:29 ` Daniel Thompson
2022-01-12 18:08 ` Russell King (Oracle)
2022-01-12 18:08 ` Russell King (Oracle)
2022-01-13 9:47 ` Daniel Thompson
2022-01-13 9:47 ` Daniel Thompson
2022-01-13 11:14 ` Arnd Bergmann
2022-01-13 11:14 ` Arnd Bergmann
2022-02-01 17:29 ` Daniel Thompson
2022-02-01 17:29 ` Daniel Thompson
2021-07-26 14:11 ` [PATCH v5 09/10] ARM: uaccess: remove set_fs() implementation Arnd Bergmann
2021-07-26 14:11 ` Arnd Bergmann
2021-07-26 14:11 ` [PATCH v5 10/10] ARM: oabi-compat: fix oabi epoll sparse warning Arnd Bergmann
2021-07-26 14:11 ` Arnd Bergmann
2021-08-11 6:39 ` [PATCH v5 00/10] ARM: remove set_fs callers and implementation Christoph Hellwig
2021-08-11 6:39 ` Christoph Hellwig
2021-08-11 7:31 ` Arnd Bergmann
2021-08-11 7:31 ` Arnd Bergmann
2021-08-11 7:31 ` Arnd Bergmann
2022-07-05 13:07 [PATCH v5 08/10] ARM: uaccess: add __{get,put}_kernel_nofault Chen Zhongjin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210726141141.2839385-9-arnd@kernel.org \
--to=arnd@kernel.org \
--cc=arnd@arndb.de \
--cc=linus.walleij@linaro.org \
--cc=linux-arch@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=linux@armlinux.org.uk \
--cc=viro@zeniv.linux.org.uk \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.