All of lore.kernel.org
 help / color / mirror / Atom feed
From: Peter Geis <pgwipeout@gmail.com>
To: Rob Herring <robh+dt@kernel.org>,
	Heiko Stuebner <heiko@sntech.de>,
	Kishon Vijay Abraham I <kishon@ti.com>,
	Vinod Koul <vkoul@kernel.org>
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org,
	linux-phy@lists.infradead.org, Peter Geis <pgwipeout@gmail.com>
Subject: [RFC PATCH 7/9] phy: phy-rockchip-inno-usb2: add rk3568 support
Date: Wed, 28 Jul 2021 08:26:04 -0400	[thread overview]
Message-ID: <20210728122606.697619-8-pgwipeout@gmail.com> (raw)
In-Reply-To: <20210728122606.697619-1-pgwipeout@gmail.com>

The rk3568 usb2phy is a standalone device with a single muxed interrupt.
Add support for the registers to the usb2phy driver.

Signed-off-by: Peter Geis <pgwipeout@gmail.com>
---
 drivers/phy/rockchip/phy-rockchip-inno-usb2.c | 65 +++++++++++++++++++
 1 file changed, 65 insertions(+)

diff --git a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
index fdeb2e7c937a..74420c439a07 100644
--- a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
+++ b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
@@ -1100,6 +1100,7 @@ static int rockchip_usb2phy_otg_port_init(struct rockchip_usb2phy *rphy,
 	if (ret) {
 		dev_err(rphy->dev, "failed to init irq for host port\n");
 		goto out;
+	}
 
 	if (!IS_ERR(rphy->edev)) {
 		rport->event_nb.notifier_call = rockchip_otg_event;
@@ -1509,6 +1510,69 @@ static const struct rockchip_usb2phy_cfg rk3399_phy_cfgs[] = {
 	{ /* sentinel */ }
 };
 
+static const struct rockchip_usb2phy_cfg rk3568_phy_cfgs[] = {
+	{
+		.reg = 0xfe8a0000,
+		.num_ports	= 2,
+		.clkout_ctl	= { 0x0008, 4, 4, 1, 0 },
+		.port_cfgs	= {
+			[USB2PHY_PORT_OTG] = {
+				.phy_sus	= { 0x0000, 8, 0, 0, 0x1d1 },
+				.bvalid_det_en	= { 0x0080, 2, 2, 0, 1 },
+				.bvalid_det_st	= { 0x0084, 2, 2, 0, 1 },
+				.bvalid_det_clr = { 0x0088, 2, 2, 0, 1 },
+				.utmi_avalid	= { 0x00c0, 10, 10, 0, 1 },
+				.utmi_bvalid	= { 0x00c0, 9, 9, 0, 1 },
+			},
+			[USB2PHY_PORT_HOST] = {
+				/* Select suspend control from controller */
+				.phy_sus	= { 0x0004, 8, 0, 0x1d2, 0x1d2 },
+				.ls_det_en	= { 0x0080, 1, 1, 0, 1 },
+				.ls_det_st	= { 0x0084, 1, 1, 0, 1 },
+				.ls_det_clr	= { 0x0088, 1, 1, 0, 1 },
+				.utmi_ls	= { 0x00c0, 17, 16, 0, 1 },
+				.utmi_hstdet	= { 0x00c0, 19, 19, 0, 1 }
+			}
+		},
+		.chg_det = {
+			.opmode		= { 0x0000, 3, 0, 5, 1 },
+			.cp_det		= { 0x00c0, 24, 24, 0, 1 },
+			.dcp_det	= { 0x00c0, 23, 23, 0, 1 },
+			.dp_det		= { 0x00c0, 25, 25, 0, 1 },
+			.idm_sink_en	= { 0x0008, 8, 8, 0, 1 },
+			.idp_sink_en	= { 0x0008, 7, 7, 0, 1 },
+			.idp_src_en	= { 0x0008, 9, 9, 0, 1 },
+			.rdm_pdwn_en	= { 0x0008, 10, 10, 0, 1 },
+			.vdm_src_en	= { 0x0008, 12, 12, 0, 1 },
+			.vdp_src_en	= { 0x0008, 11, 11, 0, 1 },
+		},
+	},
+	{
+		.reg = 0xfe8b0000,
+		.num_ports	= 2,
+		.clkout_ctl	= { 0x0008, 4, 4, 1, 0 },
+		.port_cfgs	= {
+			[USB2PHY_PORT_OTG] = {
+				.phy_sus	= { 0x0000, 8, 0, 0x1d2, 0x1d1 },
+				.ls_det_en	= { 0x0080, 0, 0, 0, 1 },
+				.ls_det_st	= { 0x0084, 0, 0, 0, 1 },
+				.ls_det_clr	= { 0x0088, 0, 0, 0, 1 },
+				.utmi_ls	= { 0x00c0, 5, 4, 0, 1 },
+				.utmi_hstdet	= { 0x00c0, 7, 7, 0, 1 }
+			},
+			[USB2PHY_PORT_HOST] = {
+				.phy_sus	= { 0x0004, 8, 0, 0x1d2, 0x1d1 },
+				.ls_det_en	= { 0x0080, 1, 1, 0, 1 },
+				.ls_det_st	= { 0x0084, 1, 1, 0, 1 },
+				.ls_det_clr	= { 0x0088, 1, 1, 0, 1 },
+				.utmi_ls	= { 0x00c0, 17, 16, 0, 1 },
+				.utmi_hstdet	= { 0x00c0, 19, 19, 0, 1 }
+			}
+		},
+	},
+	{ /* sentinel */ }
+};
+
 static const struct rockchip_usb2phy_cfg rv1108_phy_cfgs[] = {
 	{
 		.reg = 0x100,
@@ -1558,6 +1622,7 @@ static const struct of_device_id rockchip_usb2phy_dt_match[] = {
 	{ .compatible = "rockchip,rk3328-usb2phy", .data = &rk3328_phy_cfgs },
 	{ .compatible = "rockchip,rk3366-usb2phy", .data = &rk3366_phy_cfgs },
 	{ .compatible = "rockchip,rk3399-usb2phy", .data = &rk3399_phy_cfgs },
+	{ .compatible = "rockchip,rk3568-usb2phy", .data = &rk3568_phy_cfgs },
 	{ .compatible = "rockchip,rv1108-usb2phy", .data = &rv1108_phy_cfgs },
 	{}
 };
-- 
2.25.1


WARNING: multiple messages have this Message-ID (diff)
From: Peter Geis <pgwipeout@gmail.com>
To: Rob Herring <robh+dt@kernel.org>,
	Heiko Stuebner <heiko@sntech.de>,
	Kishon Vijay Abraham I <kishon@ti.com>,
	Vinod Koul <vkoul@kernel.org>
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org,
	linux-phy@lists.infradead.org, Peter Geis <pgwipeout@gmail.com>
Subject: [RFC PATCH 7/9] phy: phy-rockchip-inno-usb2: add rk3568 support
Date: Wed, 28 Jul 2021 08:26:04 -0400	[thread overview]
Message-ID: <20210728122606.697619-8-pgwipeout@gmail.com> (raw)
In-Reply-To: <20210728122606.697619-1-pgwipeout@gmail.com>

The rk3568 usb2phy is a standalone device with a single muxed interrupt.
Add support for the registers to the usb2phy driver.

Signed-off-by: Peter Geis <pgwipeout@gmail.com>
---
 drivers/phy/rockchip/phy-rockchip-inno-usb2.c | 65 +++++++++++++++++++
 1 file changed, 65 insertions(+)

diff --git a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
index fdeb2e7c937a..74420c439a07 100644
--- a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
+++ b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
@@ -1100,6 +1100,7 @@ static int rockchip_usb2phy_otg_port_init(struct rockchip_usb2phy *rphy,
 	if (ret) {
 		dev_err(rphy->dev, "failed to init irq for host port\n");
 		goto out;
+	}
 
 	if (!IS_ERR(rphy->edev)) {
 		rport->event_nb.notifier_call = rockchip_otg_event;
@@ -1509,6 +1510,69 @@ static const struct rockchip_usb2phy_cfg rk3399_phy_cfgs[] = {
 	{ /* sentinel */ }
 };
 
+static const struct rockchip_usb2phy_cfg rk3568_phy_cfgs[] = {
+	{
+		.reg = 0xfe8a0000,
+		.num_ports	= 2,
+		.clkout_ctl	= { 0x0008, 4, 4, 1, 0 },
+		.port_cfgs	= {
+			[USB2PHY_PORT_OTG] = {
+				.phy_sus	= { 0x0000, 8, 0, 0, 0x1d1 },
+				.bvalid_det_en	= { 0x0080, 2, 2, 0, 1 },
+				.bvalid_det_st	= { 0x0084, 2, 2, 0, 1 },
+				.bvalid_det_clr = { 0x0088, 2, 2, 0, 1 },
+				.utmi_avalid	= { 0x00c0, 10, 10, 0, 1 },
+				.utmi_bvalid	= { 0x00c0, 9, 9, 0, 1 },
+			},
+			[USB2PHY_PORT_HOST] = {
+				/* Select suspend control from controller */
+				.phy_sus	= { 0x0004, 8, 0, 0x1d2, 0x1d2 },
+				.ls_det_en	= { 0x0080, 1, 1, 0, 1 },
+				.ls_det_st	= { 0x0084, 1, 1, 0, 1 },
+				.ls_det_clr	= { 0x0088, 1, 1, 0, 1 },
+				.utmi_ls	= { 0x00c0, 17, 16, 0, 1 },
+				.utmi_hstdet	= { 0x00c0, 19, 19, 0, 1 }
+			}
+		},
+		.chg_det = {
+			.opmode		= { 0x0000, 3, 0, 5, 1 },
+			.cp_det		= { 0x00c0, 24, 24, 0, 1 },
+			.dcp_det	= { 0x00c0, 23, 23, 0, 1 },
+			.dp_det		= { 0x00c0, 25, 25, 0, 1 },
+			.idm_sink_en	= { 0x0008, 8, 8, 0, 1 },
+			.idp_sink_en	= { 0x0008, 7, 7, 0, 1 },
+			.idp_src_en	= { 0x0008, 9, 9, 0, 1 },
+			.rdm_pdwn_en	= { 0x0008, 10, 10, 0, 1 },
+			.vdm_src_en	= { 0x0008, 12, 12, 0, 1 },
+			.vdp_src_en	= { 0x0008, 11, 11, 0, 1 },
+		},
+	},
+	{
+		.reg = 0xfe8b0000,
+		.num_ports	= 2,
+		.clkout_ctl	= { 0x0008, 4, 4, 1, 0 },
+		.port_cfgs	= {
+			[USB2PHY_PORT_OTG] = {
+				.phy_sus	= { 0x0000, 8, 0, 0x1d2, 0x1d1 },
+				.ls_det_en	= { 0x0080, 0, 0, 0, 1 },
+				.ls_det_st	= { 0x0084, 0, 0, 0, 1 },
+				.ls_det_clr	= { 0x0088, 0, 0, 0, 1 },
+				.utmi_ls	= { 0x00c0, 5, 4, 0, 1 },
+				.utmi_hstdet	= { 0x00c0, 7, 7, 0, 1 }
+			},
+			[USB2PHY_PORT_HOST] = {
+				.phy_sus	= { 0x0004, 8, 0, 0x1d2, 0x1d1 },
+				.ls_det_en	= { 0x0080, 1, 1, 0, 1 },
+				.ls_det_st	= { 0x0084, 1, 1, 0, 1 },
+				.ls_det_clr	= { 0x0088, 1, 1, 0, 1 },
+				.utmi_ls	= { 0x00c0, 17, 16, 0, 1 },
+				.utmi_hstdet	= { 0x00c0, 19, 19, 0, 1 }
+			}
+		},
+	},
+	{ /* sentinel */ }
+};
+
 static const struct rockchip_usb2phy_cfg rv1108_phy_cfgs[] = {
 	{
 		.reg = 0x100,
@@ -1558,6 +1622,7 @@ static const struct of_device_id rockchip_usb2phy_dt_match[] = {
 	{ .compatible = "rockchip,rk3328-usb2phy", .data = &rk3328_phy_cfgs },
 	{ .compatible = "rockchip,rk3366-usb2phy", .data = &rk3366_phy_cfgs },
 	{ .compatible = "rockchip,rk3399-usb2phy", .data = &rk3399_phy_cfgs },
+	{ .compatible = "rockchip,rk3568-usb2phy", .data = &rk3568_phy_cfgs },
 	{ .compatible = "rockchip,rv1108-usb2phy", .data = &rv1108_phy_cfgs },
 	{}
 };
-- 
2.25.1


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

WARNING: multiple messages have this Message-ID (diff)
From: Peter Geis <pgwipeout@gmail.com>
To: Rob Herring <robh+dt@kernel.org>,
	Heiko Stuebner <heiko@sntech.de>,
	Kishon Vijay Abraham I <kishon@ti.com>,
	Vinod Koul <vkoul@kernel.org>
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org,
	linux-phy@lists.infradead.org, Peter Geis <pgwipeout@gmail.com>
Subject: [RFC PATCH 7/9] phy: phy-rockchip-inno-usb2: add rk3568 support
Date: Wed, 28 Jul 2021 08:26:04 -0400	[thread overview]
Message-ID: <20210728122606.697619-8-pgwipeout@gmail.com> (raw)
In-Reply-To: <20210728122606.697619-1-pgwipeout@gmail.com>

The rk3568 usb2phy is a standalone device with a single muxed interrupt.
Add support for the registers to the usb2phy driver.

Signed-off-by: Peter Geis <pgwipeout@gmail.com>
---
 drivers/phy/rockchip/phy-rockchip-inno-usb2.c | 65 +++++++++++++++++++
 1 file changed, 65 insertions(+)

diff --git a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
index fdeb2e7c937a..74420c439a07 100644
--- a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
+++ b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
@@ -1100,6 +1100,7 @@ static int rockchip_usb2phy_otg_port_init(struct rockchip_usb2phy *rphy,
 	if (ret) {
 		dev_err(rphy->dev, "failed to init irq for host port\n");
 		goto out;
+	}
 
 	if (!IS_ERR(rphy->edev)) {
 		rport->event_nb.notifier_call = rockchip_otg_event;
@@ -1509,6 +1510,69 @@ static const struct rockchip_usb2phy_cfg rk3399_phy_cfgs[] = {
 	{ /* sentinel */ }
 };
 
+static const struct rockchip_usb2phy_cfg rk3568_phy_cfgs[] = {
+	{
+		.reg = 0xfe8a0000,
+		.num_ports	= 2,
+		.clkout_ctl	= { 0x0008, 4, 4, 1, 0 },
+		.port_cfgs	= {
+			[USB2PHY_PORT_OTG] = {
+				.phy_sus	= { 0x0000, 8, 0, 0, 0x1d1 },
+				.bvalid_det_en	= { 0x0080, 2, 2, 0, 1 },
+				.bvalid_det_st	= { 0x0084, 2, 2, 0, 1 },
+				.bvalid_det_clr = { 0x0088, 2, 2, 0, 1 },
+				.utmi_avalid	= { 0x00c0, 10, 10, 0, 1 },
+				.utmi_bvalid	= { 0x00c0, 9, 9, 0, 1 },
+			},
+			[USB2PHY_PORT_HOST] = {
+				/* Select suspend control from controller */
+				.phy_sus	= { 0x0004, 8, 0, 0x1d2, 0x1d2 },
+				.ls_det_en	= { 0x0080, 1, 1, 0, 1 },
+				.ls_det_st	= { 0x0084, 1, 1, 0, 1 },
+				.ls_det_clr	= { 0x0088, 1, 1, 0, 1 },
+				.utmi_ls	= { 0x00c0, 17, 16, 0, 1 },
+				.utmi_hstdet	= { 0x00c0, 19, 19, 0, 1 }
+			}
+		},
+		.chg_det = {
+			.opmode		= { 0x0000, 3, 0, 5, 1 },
+			.cp_det		= { 0x00c0, 24, 24, 0, 1 },
+			.dcp_det	= { 0x00c0, 23, 23, 0, 1 },
+			.dp_det		= { 0x00c0, 25, 25, 0, 1 },
+			.idm_sink_en	= { 0x0008, 8, 8, 0, 1 },
+			.idp_sink_en	= { 0x0008, 7, 7, 0, 1 },
+			.idp_src_en	= { 0x0008, 9, 9, 0, 1 },
+			.rdm_pdwn_en	= { 0x0008, 10, 10, 0, 1 },
+			.vdm_src_en	= { 0x0008, 12, 12, 0, 1 },
+			.vdp_src_en	= { 0x0008, 11, 11, 0, 1 },
+		},
+	},
+	{
+		.reg = 0xfe8b0000,
+		.num_ports	= 2,
+		.clkout_ctl	= { 0x0008, 4, 4, 1, 0 },
+		.port_cfgs	= {
+			[USB2PHY_PORT_OTG] = {
+				.phy_sus	= { 0x0000, 8, 0, 0x1d2, 0x1d1 },
+				.ls_det_en	= { 0x0080, 0, 0, 0, 1 },
+				.ls_det_st	= { 0x0084, 0, 0, 0, 1 },
+				.ls_det_clr	= { 0x0088, 0, 0, 0, 1 },
+				.utmi_ls	= { 0x00c0, 5, 4, 0, 1 },
+				.utmi_hstdet	= { 0x00c0, 7, 7, 0, 1 }
+			},
+			[USB2PHY_PORT_HOST] = {
+				.phy_sus	= { 0x0004, 8, 0, 0x1d2, 0x1d1 },
+				.ls_det_en	= { 0x0080, 1, 1, 0, 1 },
+				.ls_det_st	= { 0x0084, 1, 1, 0, 1 },
+				.ls_det_clr	= { 0x0088, 1, 1, 0, 1 },
+				.utmi_ls	= { 0x00c0, 17, 16, 0, 1 },
+				.utmi_hstdet	= { 0x00c0, 19, 19, 0, 1 }
+			}
+		},
+	},
+	{ /* sentinel */ }
+};
+
 static const struct rockchip_usb2phy_cfg rv1108_phy_cfgs[] = {
 	{
 		.reg = 0x100,
@@ -1558,6 +1622,7 @@ static const struct of_device_id rockchip_usb2phy_dt_match[] = {
 	{ .compatible = "rockchip,rk3328-usb2phy", .data = &rk3328_phy_cfgs },
 	{ .compatible = "rockchip,rk3366-usb2phy", .data = &rk3366_phy_cfgs },
 	{ .compatible = "rockchip,rk3399-usb2phy", .data = &rk3399_phy_cfgs },
+	{ .compatible = "rockchip,rk3568-usb2phy", .data = &rk3568_phy_cfgs },
 	{ .compatible = "rockchip,rv1108-usb2phy", .data = &rv1108_phy_cfgs },
 	{}
 };
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

WARNING: multiple messages have this Message-ID (diff)
From: Peter Geis <pgwipeout@gmail.com>
To: Rob Herring <robh+dt@kernel.org>,
	Heiko Stuebner <heiko@sntech.de>,
	Kishon Vijay Abraham I <kishon@ti.com>,
	Vinod Koul <vkoul@kernel.org>
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org,
	linux-phy@lists.infradead.org, Peter Geis <pgwipeout@gmail.com>
Subject: [RFC PATCH 7/9] phy: phy-rockchip-inno-usb2: add rk3568 support
Date: Wed, 28 Jul 2021 08:26:04 -0400	[thread overview]
Message-ID: <20210728122606.697619-8-pgwipeout@gmail.com> (raw)
In-Reply-To: <20210728122606.697619-1-pgwipeout@gmail.com>

The rk3568 usb2phy is a standalone device with a single muxed interrupt.
Add support for the registers to the usb2phy driver.

Signed-off-by: Peter Geis <pgwipeout@gmail.com>
---
 drivers/phy/rockchip/phy-rockchip-inno-usb2.c | 65 +++++++++++++++++++
 1 file changed, 65 insertions(+)

diff --git a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
index fdeb2e7c937a..74420c439a07 100644
--- a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
+++ b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
@@ -1100,6 +1100,7 @@ static int rockchip_usb2phy_otg_port_init(struct rockchip_usb2phy *rphy,
 	if (ret) {
 		dev_err(rphy->dev, "failed to init irq for host port\n");
 		goto out;
+	}
 
 	if (!IS_ERR(rphy->edev)) {
 		rport->event_nb.notifier_call = rockchip_otg_event;
@@ -1509,6 +1510,69 @@ static const struct rockchip_usb2phy_cfg rk3399_phy_cfgs[] = {
 	{ /* sentinel */ }
 };
 
+static const struct rockchip_usb2phy_cfg rk3568_phy_cfgs[] = {
+	{
+		.reg = 0xfe8a0000,
+		.num_ports	= 2,
+		.clkout_ctl	= { 0x0008, 4, 4, 1, 0 },
+		.port_cfgs	= {
+			[USB2PHY_PORT_OTG] = {
+				.phy_sus	= { 0x0000, 8, 0, 0, 0x1d1 },
+				.bvalid_det_en	= { 0x0080, 2, 2, 0, 1 },
+				.bvalid_det_st	= { 0x0084, 2, 2, 0, 1 },
+				.bvalid_det_clr = { 0x0088, 2, 2, 0, 1 },
+				.utmi_avalid	= { 0x00c0, 10, 10, 0, 1 },
+				.utmi_bvalid	= { 0x00c0, 9, 9, 0, 1 },
+			},
+			[USB2PHY_PORT_HOST] = {
+				/* Select suspend control from controller */
+				.phy_sus	= { 0x0004, 8, 0, 0x1d2, 0x1d2 },
+				.ls_det_en	= { 0x0080, 1, 1, 0, 1 },
+				.ls_det_st	= { 0x0084, 1, 1, 0, 1 },
+				.ls_det_clr	= { 0x0088, 1, 1, 0, 1 },
+				.utmi_ls	= { 0x00c0, 17, 16, 0, 1 },
+				.utmi_hstdet	= { 0x00c0, 19, 19, 0, 1 }
+			}
+		},
+		.chg_det = {
+			.opmode		= { 0x0000, 3, 0, 5, 1 },
+			.cp_det		= { 0x00c0, 24, 24, 0, 1 },
+			.dcp_det	= { 0x00c0, 23, 23, 0, 1 },
+			.dp_det		= { 0x00c0, 25, 25, 0, 1 },
+			.idm_sink_en	= { 0x0008, 8, 8, 0, 1 },
+			.idp_sink_en	= { 0x0008, 7, 7, 0, 1 },
+			.idp_src_en	= { 0x0008, 9, 9, 0, 1 },
+			.rdm_pdwn_en	= { 0x0008, 10, 10, 0, 1 },
+			.vdm_src_en	= { 0x0008, 12, 12, 0, 1 },
+			.vdp_src_en	= { 0x0008, 11, 11, 0, 1 },
+		},
+	},
+	{
+		.reg = 0xfe8b0000,
+		.num_ports	= 2,
+		.clkout_ctl	= { 0x0008, 4, 4, 1, 0 },
+		.port_cfgs	= {
+			[USB2PHY_PORT_OTG] = {
+				.phy_sus	= { 0x0000, 8, 0, 0x1d2, 0x1d1 },
+				.ls_det_en	= { 0x0080, 0, 0, 0, 1 },
+				.ls_det_st	= { 0x0084, 0, 0, 0, 1 },
+				.ls_det_clr	= { 0x0088, 0, 0, 0, 1 },
+				.utmi_ls	= { 0x00c0, 5, 4, 0, 1 },
+				.utmi_hstdet	= { 0x00c0, 7, 7, 0, 1 }
+			},
+			[USB2PHY_PORT_HOST] = {
+				.phy_sus	= { 0x0004, 8, 0, 0x1d2, 0x1d1 },
+				.ls_det_en	= { 0x0080, 1, 1, 0, 1 },
+				.ls_det_st	= { 0x0084, 1, 1, 0, 1 },
+				.ls_det_clr	= { 0x0088, 1, 1, 0, 1 },
+				.utmi_ls	= { 0x00c0, 17, 16, 0, 1 },
+				.utmi_hstdet	= { 0x00c0, 19, 19, 0, 1 }
+			}
+		},
+	},
+	{ /* sentinel */ }
+};
+
 static const struct rockchip_usb2phy_cfg rv1108_phy_cfgs[] = {
 	{
 		.reg = 0x100,
@@ -1558,6 +1622,7 @@ static const struct of_device_id rockchip_usb2phy_dt_match[] = {
 	{ .compatible = "rockchip,rk3328-usb2phy", .data = &rk3328_phy_cfgs },
 	{ .compatible = "rockchip,rk3366-usb2phy", .data = &rk3366_phy_cfgs },
 	{ .compatible = "rockchip,rk3399-usb2phy", .data = &rk3399_phy_cfgs },
+	{ .compatible = "rockchip,rk3568-usb2phy", .data = &rk3568_phy_cfgs },
 	{ .compatible = "rockchip,rv1108-usb2phy", .data = &rv1108_phy_cfgs },
 	{}
 };
-- 
2.25.1


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

  parent reply	other threads:[~2021-07-28 12:26 UTC|newest]

Thread overview: 64+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-07-28 12:25 [RFC PATCH 0/9] phy-rockchip-inno-usb2: support rk356x usb2phy Peter Geis
2021-07-28 12:25 ` Peter Geis
2021-07-28 12:25 ` Peter Geis
2021-07-28 12:25 ` Peter Geis
2021-07-28 12:25 ` [RFC PATCH 1/9] dt-bindings: soc: rockchip: add rk3568-usb2phy-grf Peter Geis
2021-07-28 12:25   ` Peter Geis
2021-07-28 12:25   ` Peter Geis
2021-07-28 12:25   ` Peter Geis
2021-07-28 14:36   ` Johan Jonker
2021-07-28 14:36     ` Johan Jonker
2021-07-28 14:36     ` Johan Jonker
2021-07-28 14:36     ` Johan Jonker
2021-07-28 15:20     ` Peter Geis
2021-07-28 15:20       ` Peter Geis
2021-07-28 15:20       ` Peter Geis
2021-07-28 15:20       ` Peter Geis
2021-07-28 12:25 ` [RFC PATCH 2/9] dt-bindings: phy: phy-rockchip-inno-usb2: add rk3568 documentation Peter Geis
2021-07-28 12:25   ` Peter Geis
2021-07-28 12:25   ` Peter Geis
2021-07-28 12:25   ` Peter Geis
2021-07-28 15:14   ` Johan Jonker
2021-07-28 15:14     ` Johan Jonker
2021-07-28 15:14     ` Johan Jonker
2021-07-28 15:14     ` Johan Jonker
2021-07-28 15:19     ` Peter Geis
2021-07-28 15:19       ` Peter Geis
2021-07-28 15:19       ` Peter Geis
2021-07-28 15:19       ` Peter Geis
2021-07-28 12:26 ` [RFC PATCH 3/9] dt-bindings: usb: generic-ohci: increase maximum clocks Peter Geis
2021-07-28 12:26   ` Peter Geis
2021-07-28 12:26   ` Peter Geis
2021-07-28 12:26   ` Peter Geis
2021-07-28 14:59   ` Heiko Stübner
2021-07-28 14:59     ` Heiko Stübner
2021-07-28 14:59     ` Heiko Stübner
2021-07-28 14:59     ` Heiko Stübner
2021-07-28 15:20     ` Peter Geis
2021-07-28 15:20       ` Peter Geis
2021-07-28 15:20       ` Peter Geis
2021-07-28 15:20       ` Peter Geis
2021-07-28 12:26 ` [RFC PATCH 4/9] phy: phy-rockchip-inno-usb2: support #address_cells = 2 Peter Geis
2021-07-28 12:26   ` Peter Geis
2021-07-28 12:26   ` Peter Geis
2021-07-28 12:26   ` Peter Geis
2021-07-28 12:26 ` [RFC PATCH 5/9] phy: phy-rockchip-inno-usb2: support standalone phy nodes Peter Geis
2021-07-28 12:26   ` Peter Geis
2021-07-28 12:26   ` Peter Geis
2021-07-28 12:26   ` Peter Geis
2021-07-28 12:26 ` [RFC PATCH 6/9] phy: phy-rockchip-inno-usb2: support muxed interrupts Peter Geis
2021-07-28 12:26   ` Peter Geis
2021-07-28 12:26   ` Peter Geis
2021-07-28 12:26   ` Peter Geis
2021-07-28 12:26 ` Peter Geis [this message]
2021-07-28 12:26   ` [RFC PATCH 7/9] phy: phy-rockchip-inno-usb2: add rk3568 support Peter Geis
2021-07-28 12:26   ` Peter Geis
2021-07-28 12:26   ` Peter Geis
2021-07-28 12:26 ` [RFC PATCH 8/9] arm64: dts: rockchip: add usb2 nodes to rk3568 device tree Peter Geis
2021-07-28 12:26   ` Peter Geis
2021-07-28 12:26   ` Peter Geis
2021-07-28 12:26   ` Peter Geis
2021-07-28 12:26 ` [RFC PATCH 9/9] arm64: dts: rockchip: add Quartz64-A usb2 support Peter Geis
2021-07-28 12:26   ` Peter Geis
2021-07-28 12:26   ` Peter Geis
2021-07-28 12:26   ` Peter Geis

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210728122606.697619-8-pgwipeout@gmail.com \
    --to=pgwipeout@gmail.com \
    --cc=devicetree@vger.kernel.org \
    --cc=heiko@sntech.de \
    --cc=kishon@ti.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-phy@lists.infradead.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=robh+dt@kernel.org \
    --cc=vkoul@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.