From: "Fabio M. De Francesco" <fmdefrancesco@gmail.com>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Larry Finger <Larry.Finger@lwfinger.net>,
linux-staging@lists.linux.dev, linux-kernel@vger.kernel.org
Cc: "Fabio M. De Francesco" <fmdefrancesco@gmail.com>
Subject: [PATCH] staging: r8188eu: include: Remove unused const definitions
Date: Mon, 2 Aug 2021 03:10:25 +0200 [thread overview]
Message-ID: <20210802011025.23887-1-fmdefrancesco@gmail.com> (raw)
Remove unused const definitions. Issues detected by sparse. Remove the
'#ifdef' and '#endif' preprocessor directives that surround them.
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
---
.../staging/r8188eu/include/rtw_mp_ioctl.h | 77 -------------------
1 file changed, 77 deletions(-)
diff --git a/drivers/staging/r8188eu/include/rtw_mp_ioctl.h b/drivers/staging/r8188eu/include/rtw_mp_ioctl.h
index e856fd0ad036..0376ddbf6011 100644
--- a/drivers/staging/r8188eu/include/rtw_mp_ioctl.h
+++ b/drivers/staging/r8188eu/include/rtw_mp_ioctl.h
@@ -135,83 +135,6 @@ int rtl8188eu_oid_rt_set_power_down_hdl(struct oid_par_priv *poid_par_priv);
int rtl8188eu_oid_rt_get_power_mode_hdl(struct oid_par_priv *poid_par_priv);
int rtl8188eu_oid_rt_pro_trigger_gpio_hdl(struct oid_par_priv *poid_par_priv);
-#ifdef _RTW_MP_IOCTL_C_
-
-static const struct oid_obj_priv rtl8188eu_oid_rtl_seg_81_80_00[] = {
- {1, &oid_null_function}, /* 0x00 OID_RT_PRO_RESET_DUT */
- {1, &rtl8188eu_oid_rt_pro_set_data_rate_hdl}, /* 0x01 */
- {1, &rtl8188eu_oid_rt_pro_start_test_hdl}, /* 0x02 */
- {1, &rtl8188eu_oid_rt_pro_stop_test_hdl}, /* 0x03 */
- {1, &oid_null_function}, /* 0x04 OID_RT_PRO_SET_PREAMBLE */
- {1, &oid_null_function}, /* 0x05 OID_RT_PRO_SET_SCRAMBLER */
- {1, &oid_null_function}, /* 0x06 OID_RT_PRO_SET_FILTER_BB */
- {1, &oid_null_function},/* 0x07 OID_RT_PRO_SET_MANUAL_DIVERSITY_BB */
- {1, &rtl8188eu_oid_rt_pro_set_channel_direct_call_hdl}, /* 0x08 */
- {1, &oid_null_function},/* 0x09 OID_RT_PRO_SET_SLEEP_MODE_DIRECT_CALL */
- {1, &oid_null_function},/* 0x0A OID_RT_PRO_SET_WAKE_MODE_DIRECT_CALL */
- {1, &rtl8188eu_oid_rt_pro_set_continuous_tx_hdl}, /* 0x0B OID_RT_PRO_SET_TX_CONTINUOUS_DIRECT_CALL */
- {1, &rtl8188eu_oid_rt_pro_set_single_carrier_tx_hdl},/* 0x0C OID_RT_PRO_SET_SINGLE_CARRIER_TX_CONTINUOUS */
- {1, &oid_null_function}, /* 0x0D OID_RT_PRO_SET_TX_ANTENNA_BB */
- {1, &rtl8188eu_oid_rt_pro_set_antenna_bb_hdl}, /* 0x0E */
- {1, &oid_null_function}, /* 0x0F OID_RT_PRO_SET_CR_SCRAMBLER */
- {1, &oid_null_function}, /* 0x10 OID_RT_PRO_SET_CR_NEW_FILTER */
- {1, &rtl8188eu_oid_rt_pro_set_tx_power_control_hdl},/* 0x11 OID_RT_PRO_SET_TX_POWER_CONTROL */
- {1, &oid_null_function}, /* 0x12 OID_RT_PRO_SET_CR_TX_CONFIG */
- {1, &oid_null_function}, /* 0x13 OID_RT_PRO_GET_TX_POWER_CONTROL */
- {1, &oid_null_function}, /* 0x14 OID_RT_PRO_GET_CR_SIGNAL_QUALITY */
- {1, &oid_null_function}, /* 0x15 OID_RT_PRO_SET_CR_SETPOINT */
- {1, &oid_null_function}, /* 0x16 OID_RT_PRO_SET_INTEGRATOR */
- {1, &oid_null_function}, /* 0x17 OID_RT_PRO_SET_SIGNAL_QUALITY */
- {1, &oid_null_function}, /* 0x18 OID_RT_PRO_GET_INTEGRATOR */
- {1, &oid_null_function}, /* 0x19 OID_RT_PRO_GET_SIGNAL_QUALITY */
- {1, &oid_null_function}, /* 0x1A OID_RT_PRO_QUERY_EEPROM_TYPE */
- {1, &oid_null_function}, /* 0x1B OID_RT_PRO_WRITE_MAC_ADDRESS */
- {1, &oid_null_function}, /* 0x1C OID_RT_PRO_READ_MAC_ADDRESS */
- {1, &oid_null_function}, /* 0x1D OID_RT_PRO_WRITE_CIS_DATA */
- {1, &oid_null_function}, /* 0x1E OID_RT_PRO_READ_CIS_DATA */
- {1, &oid_null_function} /* 0x1F OID_RT_PRO_WRITE_POWER_CONTROL */
-};
-
-static const struct oid_obj_priv rtl8188eu_oid_rtl_seg_81_80_20[] = {
- {1, &oid_null_function}, /* 0x20 OID_RT_PRO_READ_POWER_CONTROL */
- {1, &oid_null_function}, /* 0x21 OID_RT_PRO_WRITE_EEPROM */
- {1, &oid_null_function}, /* 0x22 OID_RT_PRO_READ_EEPROM */
- {1, &rtl8188eu_oid_rt_pro_reset_tx_packet_sent_hdl}, /* 0x23 */
- {1, &rtl8188eu_oid_rt_pro_query_tx_packet_sent_hdl}, /* 0x24 */
- {1, &rtl8188eu_oid_rt_pro_reset_rx_packet_received_hdl}, /* 0x25 */
- {1, &rtl8188eu_oid_rt_pro_query_rx_packet_received_hdl}, /* 0x26 */
- {1, &rtl8188eu_oid_rt_pro_query_rx_packet_crc32_error_hdl}, /* 0x27 */
- {1, &oid_null_function}, /* 0x28 OID_RT_PRO_QUERY_CURRENT_ADDRESS */
- {1, &oid_null_function}, /* 0x29 OID_RT_PRO_QUERY_PERMANENT_ADDRESS */
- {1, &oid_null_function}, /* 0x2A OID_RT_PRO_SET_PHILIPS_RF_PARAMETERS */
- {1, &rtl8188eu_oid_rt_pro_set_carrier_suppression_tx_hdl},/* 0x2B OID_RT_PRO_SET_CARRIER_SUPPRESSION_TX */
- {1, &oid_null_function}, /* 0x2C OID_RT_PRO_RECEIVE_PACKET */
- {1, &oid_null_function}, /* 0x2D OID_RT_PRO_WRITE_EEPROM_BYTE */
- {1, &oid_null_function}, /* 0x2E OID_RT_PRO_READ_EEPROM_BYTE */
- {1, &rtl8188eu_oid_rt_pro_set_modulation_hdl} /* 0x2F */
-};
-
-static const struct oid_obj_priv rtl8188eu_oid_rtl_seg_81_80_40[] = {
- {1, &oid_null_function}, /* 0x40 */
- {1, &oid_null_function}, /* 0x41 */
- {1, &oid_null_function}, /* 0x42 */
- {1, &rtl8188eu_oid_rt_pro_set_single_tone_tx_hdl}, /* 0x43 */
- {1, &oid_null_function}, /* 0x44 */
- {1, &oid_null_function} /* 0x45 */
-};
-
-static const struct oid_obj_priv rtl8188eu_oid_rtl_seg_81_80_80[] = {
- {1, &oid_null_function}, /* 0x80 OID_RT_DRIVER_OPTION */
- {1, &oid_null_function}, /* 0x81 OID_RT_RF_OFF */
- {1, &oid_null_function} /* 0x82 OID_RT_AUTH_STATUS */
-};
-
-static const struct oid_obj_priv rtl8188eu_oid_rtl_seg_81_85[] = {
- {1, &rtl8188eu_oid_rt_wireless_mode_hdl} /* 0x00 OID_RT_WIRELESS_MODE */
-};
-
-#endif /* _RTL871X_MP_IOCTL_C_ */
-
struct rwreg_param {
u32 offset;
u32 width;
--
2.32.0
next reply other threads:[~2021-08-02 1:10 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-08-02 1:10 Fabio M. De Francesco [this message]
2021-08-05 10:49 ` [PATCH] staging: r8188eu: include: Remove unused const definitions Greg Kroah-Hartman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210802011025.23887-1-fmdefrancesco@gmail.com \
--to=fmdefrancesco@gmail.com \
--cc=Larry.Finger@lwfinger.net \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-staging@lists.linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.