[PATCH v1 4/4] clk: tegra: Remove CLK_IS_CRITICAL flag from fuse clock

[Dmitry Osipenko <digetx@gmail.com>]

FUSE driver now takes care of keeping the clock enabled when necessary.
Remove the CLK_IS_CRITICAL flag from the clock.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
---
 drivers/clk/tegra/clk-tegra-periph.c | 6 +-----
 1 file changed, 1 insertion(+), 5 deletions(-)

diff --git a/drivers/clk/tegra/clk-tegra-periph.c b/drivers/clk/tegra/clk-tegra-periph.c
index 292d6269daf1..4dcf7f7cb8a0 100644
--- a/drivers/clk/tegra/clk-tegra-periph.c
+++ b/drivers/clk/tegra/clk-tegra-periph.c
@@ -777,11 +777,7 @@ static struct tegra_periph_init_data gate_clks[] = {
 	GATE("ahbdma", "hclk", 33, 0, tegra_clk_ahbdma, 0),
 	GATE("apbdma", "pclk", 34, 0, tegra_clk_apbdma, 0),
 	GATE("kbc", "clk_32k", 36, TEGRA_PERIPH_ON_APB | TEGRA_PERIPH_NO_RESET, tegra_clk_kbc, 0),
-	/*
-	 * Critical for RAM re-repair operation, which must occur on resume
-	 * from LP1 system suspend and as part of CCPLEX cluster switching.
-	 */
-	GATE("fuse", "clk_m", 39, TEGRA_PERIPH_ON_APB, tegra_clk_fuse, CLK_IS_CRITICAL),
+	GATE("fuse", "clk_m", 39, TEGRA_PERIPH_ON_APB, tegra_clk_fuse, 0),
 	GATE("fuse_burn", "clk_m", 39, TEGRA_PERIPH_ON_APB, tegra_clk_fuse_burn, 0),
 	GATE("kfuse", "clk_m", 40, TEGRA_PERIPH_ON_APB, tegra_clk_kfuse, 0),
 	GATE("apbif", "clk_m", 107, TEGRA_PERIPH_ON_APB, tegra_clk_apbif, 0),
-- 
2.32.0