[PATCH v2 0/6] PCI: Add support for J7200 and AM64

[Kishon Vijay Abraham I <kishon@ti.com>]

This series adds the compatible specific to J7200 and AM64 and
applies the erratas and configuration specific to them.

This series also includes Nadeem's patch that adds a quirk in
Cadence driver which is used by J7200 [1].

The DT binding for both J7200 and AM64 is already merged.

v1 of the patch series can be found at [2]

Changes from v1:
1) As suggested by Bjorn, used unsigned int :1, instead of bool for
structure members
2) Removed using unnecessary local variables and also fixed some
code alignment

[1] -> https://lore.kernel.org/r/20210528155626.21793-1-nadeem@cadence.com
[2] -> https://lore.kernel.org/r/20210706105035.9915-1-kishon@ti.com

Kishon Vijay Abraham I (5):
  PCI: cadence: Use bitfield for *quirk_retrain_flag* instead of bool
  PCI: j721e: Add PCIe support for J7200
  PCI: j721e: Add PCIe support for AM64
  misc: pci_endpoint_test: Do not request or allocate IRQs in probe
  misc: pci_endpoint_test: Add deviceID for AM64 and J7200

Nadeem Athani (1):
  PCI: cadence: Add quirk flag to set minimum delay in LTSSM
    Detect.Quiet state

 drivers/misc/pci_endpoint_test.c              | 27 ++++++--
 drivers/pci/controller/cadence/pci-j721e.c    | 61 +++++++++++++++++--
 .../pci/controller/cadence/pcie-cadence-ep.c  |  4 ++
 .../controller/cadence/pcie-cadence-host.c    |  3 +
 drivers/pci/controller/cadence/pcie-cadence.c | 17 ++++++
 drivers/pci/controller/cadence/pcie-cadence.h | 17 +++++-
 6 files changed, 117 insertions(+), 12 deletions(-)

-- 
2.17.1