All of lore.kernel.org
 help / color / mirror / Atom feed
From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
To: Bjorn Andersson <bjorn.andersson@linaro.org>,
	Rob Clark <robdclark@gmail.com>, Sean Paul <sean@poorly.run>,
	Abhinav Kumar <abhinavk@codeaurora.org>
Cc: Jonathan Marek <jonathan@marek.ca>,
	Stephen Boyd <sboyd@kernel.org>, David Airlie <airlied@linux.ie>,
	Daniel Vetter <daniel@ffwll.ch>,
	linux-arm-msm@vger.kernel.org, dri-devel@lists.freedesktop.org,
	freedreno@lists.freedesktop.org
Subject: [PATCH v5] drm/msm/dsi: add continuous clock support for 7nm PHY
Date: Thu,  5 Aug 2021 20:08:17 +0300	[thread overview]
Message-ID: <20210805170817.3337665-1-dmitry.baryshkov@linaro.org> (raw)

Unlike previous generations, 7nm PHYs are required to collaborate with
the host for conitnuos clock mode. Add changes neccessary to enable
continuous clock mode in the 7nm DSI PHYs.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
Changes since v4:
 - Fix the comment regarding msm_dsi_phy_set_continuous_clock()

Changes since v3:
 - Invert the DSI_LANE_CTRL_HS_REQ_SEL_PHY bit logic, as noted by
   Abhinav.

Changes since v2:
 - Really drop msm_dsi_phy_needs_hs_phy_sel()

Changes since v1:
 - Remove the need for a separate msm_dsi_phy_needs_hs_phy_sel() call
 - Fix setting continuous clock for a dual DSI case.
---
 drivers/gpu/drm/msm/dsi/dsi.h             |  3 ++-
 drivers/gpu/drm/msm/dsi/dsi.xml.h         |  1 +
 drivers/gpu/drm/msm/dsi/dsi_host.c        | 12 ++++++++----
 drivers/gpu/drm/msm/dsi/dsi_manager.c     |  4 ++--
 drivers/gpu/drm/msm/dsi/phy/dsi_phy.c     |  9 +++++++++
 drivers/gpu/drm/msm/dsi/phy/dsi_phy.h     |  1 +
 drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c | 17 +++++++++++++++++
 7 files changed, 40 insertions(+), 7 deletions(-)

diff --git a/drivers/gpu/drm/msm/dsi/dsi.h b/drivers/gpu/drm/msm/dsi/dsi.h
index 9b8e9b07eced..58e63bf34fe9 100644
--- a/drivers/gpu/drm/msm/dsi/dsi.h
+++ b/drivers/gpu/drm/msm/dsi/dsi.h
@@ -109,7 +109,7 @@ int msm_dsi_host_enable(struct mipi_dsi_host *host);
 int msm_dsi_host_disable(struct mipi_dsi_host *host);
 int msm_dsi_host_power_on(struct mipi_dsi_host *host,
 			struct msm_dsi_phy_shared_timings *phy_shared_timings,
-			bool is_dual_dsi);
+			bool is_dual_dsi, struct msm_dsi_phy *phy);
 int msm_dsi_host_power_off(struct mipi_dsi_host *host);
 int msm_dsi_host_set_display_mode(struct mipi_dsi_host *host,
 				  const struct drm_display_mode *mode);
@@ -175,6 +175,7 @@ int msm_dsi_phy_get_clk_provider(struct msm_dsi_phy *phy,
 void msm_dsi_phy_pll_save_state(struct msm_dsi_phy *phy);
 int msm_dsi_phy_pll_restore_state(struct msm_dsi_phy *phy);
 void msm_dsi_phy_snapshot(struct msm_disp_state *disp_state, struct msm_dsi_phy *phy);
+bool msm_dsi_phy_set_continuous_clock(struct msm_dsi_phy *phy, bool enable);
 
 #endif /* __DSI_CONNECTOR_H__ */
 
diff --git a/drivers/gpu/drm/msm/dsi/dsi.xml.h b/drivers/gpu/drm/msm/dsi/dsi.xml.h
index eadbcc78fd72..473c81605054 100644
--- a/drivers/gpu/drm/msm/dsi/dsi.xml.h
+++ b/drivers/gpu/drm/msm/dsi/dsi.xml.h
@@ -518,6 +518,7 @@ static inline uint32_t DSI_CLKOUT_TIMING_CTRL_T_CLK_POST(uint32_t val)
 #define DSI_LANE_STATUS_DLN0_DIRECTION				0x00010000
 
 #define REG_DSI_LANE_CTRL					0x000000a8
+#define DSI_LANE_CTRL_HS_REQ_SEL_PHY				0x01000000
 #define DSI_LANE_CTRL_CLKLN_HS_FORCE_REQUEST			0x10000000
 
 #define REG_DSI_LANE_SWAP_CTRL					0x000000ac
diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c b/drivers/gpu/drm/msm/dsi/dsi_host.c
index ed504fe5074f..3558e5cd400f 100644
--- a/drivers/gpu/drm/msm/dsi/dsi_host.c
+++ b/drivers/gpu/drm/msm/dsi/dsi_host.c
@@ -834,7 +834,7 @@ static inline enum dsi_cmd_dst_format dsi_get_cmd_fmt(
 }
 
 static void dsi_ctrl_config(struct msm_dsi_host *msm_host, bool enable,
-			struct msm_dsi_phy_shared_timings *phy_shared_timings)
+			struct msm_dsi_phy_shared_timings *phy_shared_timings, struct msm_dsi_phy *phy)
 {
 	u32 flags = msm_host->mode_flags;
 	enum mipi_dsi_pixel_format mipi_fmt = msm_host->format;
@@ -929,6 +929,10 @@ static void dsi_ctrl_config(struct msm_dsi_host *msm_host, bool enable,
 
 	if (!(flags & MIPI_DSI_CLOCK_NON_CONTINUOUS)) {
 		lane_ctrl = dsi_read(msm_host, REG_DSI_LANE_CTRL);
+
+		if (msm_dsi_phy_set_continuous_clock(phy, enable))
+			lane_ctrl &= ~DSI_LANE_CTRL_HS_REQ_SEL_PHY;
+
 		dsi_write(msm_host, REG_DSI_LANE_CTRL,
 			lane_ctrl | DSI_LANE_CTRL_CLKLN_HS_FORCE_REQUEST);
 	}
@@ -2354,7 +2358,7 @@ static void msm_dsi_sfpb_config(struct msm_dsi_host *msm_host, bool enable)
 
 int msm_dsi_host_power_on(struct mipi_dsi_host *host,
 			struct msm_dsi_phy_shared_timings *phy_shared_timings,
-			bool is_dual_dsi)
+			bool is_dual_dsi, struct msm_dsi_phy *phy)
 {
 	struct msm_dsi_host *msm_host = to_msm_dsi_host(host);
 	const struct msm_dsi_cfg_handler *cfg_hnd = msm_host->cfg_hnd;
@@ -2394,7 +2398,7 @@ int msm_dsi_host_power_on(struct mipi_dsi_host *host,
 
 	dsi_timing_setup(msm_host, is_dual_dsi);
 	dsi_sw_reset(msm_host);
-	dsi_ctrl_config(msm_host, true, phy_shared_timings);
+	dsi_ctrl_config(msm_host, true, phy_shared_timings, phy);
 
 	if (msm_host->disp_en_gpio)
 		gpiod_set_value(msm_host->disp_en_gpio, 1);
@@ -2425,7 +2429,7 @@ int msm_dsi_host_power_off(struct mipi_dsi_host *host)
 		goto unlock_ret;
 	}
 
-	dsi_ctrl_config(msm_host, false, NULL);
+	dsi_ctrl_config(msm_host, false, NULL, NULL);
 
 	if (msm_host->disp_en_gpio)
 		gpiod_set_value(msm_host->disp_en_gpio, 0);
diff --git a/drivers/gpu/drm/msm/dsi/dsi_manager.c b/drivers/gpu/drm/msm/dsi/dsi_manager.c
index 4ebfedc4a9ac..1b89fef8f805 100644
--- a/drivers/gpu/drm/msm/dsi/dsi_manager.c
+++ b/drivers/gpu/drm/msm/dsi/dsi_manager.c
@@ -381,7 +381,7 @@ static void dsi_mgr_bridge_pre_enable(struct drm_bridge *bridge)
 	if (ret)
 		goto phy_en_fail;
 
-	ret = msm_dsi_host_power_on(host, &phy_shared_timings[id], is_dual_dsi);
+	ret = msm_dsi_host_power_on(host, &phy_shared_timings[id], is_dual_dsi, msm_dsi->phy);
 	if (ret) {
 		pr_err("%s: power on host %d failed, %d\n", __func__, id, ret);
 		goto host_on_fail;
@@ -389,7 +389,7 @@ static void dsi_mgr_bridge_pre_enable(struct drm_bridge *bridge)
 
 	if (is_dual_dsi && msm_dsi1) {
 		ret = msm_dsi_host_power_on(msm_dsi1->host,
-				&phy_shared_timings[DSI_1], is_dual_dsi);
+				&phy_shared_timings[DSI_1], is_dual_dsi, msm_dsi1->phy);
 		if (ret) {
 			pr_err("%s: power on host1 failed, %d\n",
 							__func__, ret);
diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c
index 6ca6bfd4809b..723d2eeafa69 100644
--- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c
@@ -835,6 +835,15 @@ void msm_dsi_phy_set_usecase(struct msm_dsi_phy *phy,
 		phy->usecase = uc;
 }
 
+/* Returns true if we have to clear DSI_LANE_CTRL.HS_REQ_SEL_PHY */
+bool msm_dsi_phy_set_continuous_clock(struct msm_dsi_phy *phy, bool enable)
+{
+	if (!phy || !phy->cfg->ops.set_continuous_clock)
+		return false;
+
+	return phy->cfg->ops.set_continuous_clock(phy, enable);
+}
+
 int msm_dsi_phy_get_clk_provider(struct msm_dsi_phy *phy,
 	struct clk **byte_clk_provider, struct clk **pixel_clk_provider)
 {
diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h
index 5b0feef87127..43dee28450b4 100644
--- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h
@@ -24,6 +24,7 @@ struct msm_dsi_phy_ops {
 	void (*disable)(struct msm_dsi_phy *phy);
 	void (*save_pll_state)(struct msm_dsi_phy *phy);
 	int (*restore_pll_state)(struct msm_dsi_phy *phy);
+	bool (*set_continuous_clock)(struct msm_dsi_phy *phy, bool enable);
 };
 
 struct msm_dsi_phy_cfg {
diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c
index 7c23d4c47338..a78a0c45d101 100644
--- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c
@@ -932,6 +932,21 @@ static int dsi_7nm_phy_enable(struct msm_dsi_phy *phy,
 	return 0;
 }
 
+static bool dsi_7nm_set_continuous_clock(struct msm_dsi_phy *phy, bool enable)
+{
+	void __iomem *base = phy->base;
+	u32 data;
+
+	data = dsi_phy_read(base + REG_DSI_7nm_PHY_CMN_LANE_CTRL1);
+	if (enable)
+		data |= BIT(5) | BIT(6);
+	else
+		data &= ~(BIT(5) | BIT(6));
+	dsi_phy_write(base + REG_DSI_7nm_PHY_CMN_LANE_CTRL1, data);
+
+	return enable;
+}
+
 static void dsi_7nm_phy_disable(struct msm_dsi_phy *phy)
 {
 	void __iomem *base = phy->base;
@@ -972,6 +987,7 @@ const struct msm_dsi_phy_cfg dsi_phy_7nm_cfgs = {
 		.pll_init = dsi_pll_7nm_init,
 		.save_pll_state = dsi_7nm_pll_save_state,
 		.restore_pll_state = dsi_7nm_pll_restore_state,
+		.set_continuous_clock = dsi_7nm_set_continuous_clock,
 	},
 	.min_pll_rate = 600000000UL,
 #ifdef CONFIG_64BIT
@@ -998,6 +1014,7 @@ const struct msm_dsi_phy_cfg dsi_phy_7nm_8150_cfgs = {
 		.pll_init = dsi_pll_7nm_init,
 		.save_pll_state = dsi_7nm_pll_save_state,
 		.restore_pll_state = dsi_7nm_pll_restore_state,
+		.set_continuous_clock = dsi_7nm_set_continuous_clock,
 	},
 	.min_pll_rate = 1000000000UL,
 	.max_pll_rate = 3500000000UL,
-- 
2.30.2


             reply	other threads:[~2021-08-05 17:08 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-08-05 17:08 Dmitry Baryshkov [this message]
2021-08-11  0:12 ` [PATCH v5] drm/msm/dsi: add continuous clock support for 7nm PHY abhinavk

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210805170817.3337665-1-dmitry.baryshkov@linaro.org \
    --to=dmitry.baryshkov@linaro.org \
    --cc=abhinavk@codeaurora.org \
    --cc=airlied@linux.ie \
    --cc=bjorn.andersson@linaro.org \
    --cc=daniel@ffwll.ch \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=freedreno@lists.freedesktop.org \
    --cc=jonathan@marek.ca \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=robdclark@gmail.com \
    --cc=sboyd@kernel.org \
    --cc=sean@poorly.run \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.