All of lore.kernel.org
 help / color / mirror / Atom feed
From: Christian Hewitt <christianshewitt@gmail.com>
To: Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Kevin Hilman <khilman@baylibre.com>,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org
Cc: Christian Hewitt <christianshewitt@gmail.com>,
	Mathias Steiger <mathias.steiger@googlemail.com>
Subject: [PATCH] drm/meson: fix colour distortion from HDR set during vendor u-boot
Date: Fri,  6 Aug 2021 09:40:05 +0000	[thread overview]
Message-ID: <20210806094005.7136-1-christianshewitt@gmail.com> (raw)

Add support for the OSD1 HDR registers so meson DRM can handle the HDR
properties set by Amlogic u-boot on G12A and newer devices which result
in blue/green/pink colour distortion to display output.

This takes the original patch submissions from Mathias [0] and [1] with
corrections for formatting and the missing description and attribution
needed for merge.

[0] https://lore.kernel.org/linux-amlogic/59dfd7e6-fc91-3d61-04c4-94e078a3188c@baylibre.com/T/
[1] https://lore.kernel.org/linux-amlogic/CAOKfEHBx_fboUqkENEMd-OC-NSrf46nto+vDLgvgttzPe99kXg@mail.gmail.com/T/#u

Fixes: 728883948b0d ("drm/meson: Add G12A Support for VIU setup")
Suggested-by: Mathias Steiger <mathias.steiger@googlemail.com>
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Tested-by: Neil Armstrong<narmstrong@baylibre.com>
Tested-by: Philip Milev <milev.philip@gmail.com>
---
 drivers/gpu/drm/meson/meson_registers.h | 5 +++++
 drivers/gpu/drm/meson/meson_viu.c       | 7 ++++++-
 2 files changed, 11 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/meson/meson_registers.h b/drivers/gpu/drm/meson/meson_registers.h
index 446e7961da48..0f3cafab8860 100644
--- a/drivers/gpu/drm/meson/meson_registers.h
+++ b/drivers/gpu/drm/meson/meson_registers.h
@@ -634,6 +634,11 @@
 #define VPP_WRAP_OSD3_MATRIX_PRE_OFFSET2 0x3dbc
 #define VPP_WRAP_OSD3_MATRIX_EN_CTRL 0x3dbd
 
+/* osd1 HDR */
+#define OSD1_HDR2_CTRL 0x38a0
+#define OSD1_HDR2_CTRL_VDIN0_HDR2_TOP_EN       BIT(13)
+#define OSD1_HDR2_CTRL_REG_ONLY_MAT            BIT(16)
+
 /* osd2 scaler */
 #define OSD2_VSC_PHASE_STEP 0x3d00
 #define OSD2_VSC_INI_PHASE 0x3d01
diff --git a/drivers/gpu/drm/meson/meson_viu.c b/drivers/gpu/drm/meson/meson_viu.c
index aede0c67a57f..259f3e6bec90 100644
--- a/drivers/gpu/drm/meson/meson_viu.c
+++ b/drivers/gpu/drm/meson/meson_viu.c
@@ -425,9 +425,14 @@ void meson_viu_init(struct meson_drm *priv)
 	if (meson_vpu_is_compatible(priv, VPU_COMPATIBLE_GXM) ||
 	    meson_vpu_is_compatible(priv, VPU_COMPATIBLE_GXL))
 		meson_viu_load_matrix(priv);
-	else if (meson_vpu_is_compatible(priv, VPU_COMPATIBLE_G12A))
+	else if (meson_vpu_is_compatible(priv, VPU_COMPATIBLE_G12A)) {
 		meson_viu_set_g12a_osd1_matrix(priv, RGB709_to_YUV709l_coeff,
 					       true);
+		/* fix green/pink color distortion from vendor u-boot */
+		writel_bits_relaxed(OSD1_HDR2_CTRL_REG_ONLY_MAT |
+				OSD1_HDR2_CTRL_VDIN0_HDR2_TOP_EN, 0,
+				priv->io_base + _REG(OSD1_HDR2_CTRL));
+	}
 
 	/* Initialize OSD1 fifo control register */
 	reg = VIU_OSD_DDR_PRIORITY_URGENT |
-- 
2.17.1


WARNING: multiple messages have this Message-ID (diff)
From: Christian Hewitt <christianshewitt@gmail.com>
To: Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Kevin Hilman <khilman@baylibre.com>,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org
Cc: Christian Hewitt <christianshewitt@gmail.com>,
	Mathias Steiger <mathias.steiger@googlemail.com>
Subject: [PATCH] drm/meson: fix colour distortion from HDR set during vendor u-boot
Date: Fri,  6 Aug 2021 09:40:05 +0000	[thread overview]
Message-ID: <20210806094005.7136-1-christianshewitt@gmail.com> (raw)

Add support for the OSD1 HDR registers so meson DRM can handle the HDR
properties set by Amlogic u-boot on G12A and newer devices which result
in blue/green/pink colour distortion to display output.

This takes the original patch submissions from Mathias [0] and [1] with
corrections for formatting and the missing description and attribution
needed for merge.

[0] https://lore.kernel.org/linux-amlogic/59dfd7e6-fc91-3d61-04c4-94e078a3188c@baylibre.com/T/
[1] https://lore.kernel.org/linux-amlogic/CAOKfEHBx_fboUqkENEMd-OC-NSrf46nto+vDLgvgttzPe99kXg@mail.gmail.com/T/#u

Fixes: 728883948b0d ("drm/meson: Add G12A Support for VIU setup")
Suggested-by: Mathias Steiger <mathias.steiger@googlemail.com>
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Tested-by: Neil Armstrong<narmstrong@baylibre.com>
Tested-by: Philip Milev <milev.philip@gmail.com>
---
 drivers/gpu/drm/meson/meson_registers.h | 5 +++++
 drivers/gpu/drm/meson/meson_viu.c       | 7 ++++++-
 2 files changed, 11 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/meson/meson_registers.h b/drivers/gpu/drm/meson/meson_registers.h
index 446e7961da48..0f3cafab8860 100644
--- a/drivers/gpu/drm/meson/meson_registers.h
+++ b/drivers/gpu/drm/meson/meson_registers.h
@@ -634,6 +634,11 @@
 #define VPP_WRAP_OSD3_MATRIX_PRE_OFFSET2 0x3dbc
 #define VPP_WRAP_OSD3_MATRIX_EN_CTRL 0x3dbd
 
+/* osd1 HDR */
+#define OSD1_HDR2_CTRL 0x38a0
+#define OSD1_HDR2_CTRL_VDIN0_HDR2_TOP_EN       BIT(13)
+#define OSD1_HDR2_CTRL_REG_ONLY_MAT            BIT(16)
+
 /* osd2 scaler */
 #define OSD2_VSC_PHASE_STEP 0x3d00
 #define OSD2_VSC_INI_PHASE 0x3d01
diff --git a/drivers/gpu/drm/meson/meson_viu.c b/drivers/gpu/drm/meson/meson_viu.c
index aede0c67a57f..259f3e6bec90 100644
--- a/drivers/gpu/drm/meson/meson_viu.c
+++ b/drivers/gpu/drm/meson/meson_viu.c
@@ -425,9 +425,14 @@ void meson_viu_init(struct meson_drm *priv)
 	if (meson_vpu_is_compatible(priv, VPU_COMPATIBLE_GXM) ||
 	    meson_vpu_is_compatible(priv, VPU_COMPATIBLE_GXL))
 		meson_viu_load_matrix(priv);
-	else if (meson_vpu_is_compatible(priv, VPU_COMPATIBLE_G12A))
+	else if (meson_vpu_is_compatible(priv, VPU_COMPATIBLE_G12A)) {
 		meson_viu_set_g12a_osd1_matrix(priv, RGB709_to_YUV709l_coeff,
 					       true);
+		/* fix green/pink color distortion from vendor u-boot */
+		writel_bits_relaxed(OSD1_HDR2_CTRL_REG_ONLY_MAT |
+				OSD1_HDR2_CTRL_VDIN0_HDR2_TOP_EN, 0,
+				priv->io_base + _REG(OSD1_HDR2_CTRL));
+	}
 
 	/* Initialize OSD1 fifo control register */
 	reg = VIU_OSD_DDR_PRIORITY_URGENT |
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

WARNING: multiple messages have this Message-ID (diff)
From: Christian Hewitt <christianshewitt@gmail.com>
To: Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Kevin Hilman <khilman@baylibre.com>,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org
Cc: Christian Hewitt <christianshewitt@gmail.com>,
	Mathias Steiger <mathias.steiger@googlemail.com>
Subject: [PATCH] drm/meson: fix colour distortion from HDR set during vendor u-boot
Date: Fri,  6 Aug 2021 09:40:05 +0000	[thread overview]
Message-ID: <20210806094005.7136-1-christianshewitt@gmail.com> (raw)

Add support for the OSD1 HDR registers so meson DRM can handle the HDR
properties set by Amlogic u-boot on G12A and newer devices which result
in blue/green/pink colour distortion to display output.

This takes the original patch submissions from Mathias [0] and [1] with
corrections for formatting and the missing description and attribution
needed for merge.

[0] https://lore.kernel.org/linux-amlogic/59dfd7e6-fc91-3d61-04c4-94e078a3188c@baylibre.com/T/
[1] https://lore.kernel.org/linux-amlogic/CAOKfEHBx_fboUqkENEMd-OC-NSrf46nto+vDLgvgttzPe99kXg@mail.gmail.com/T/#u

Fixes: 728883948b0d ("drm/meson: Add G12A Support for VIU setup")
Suggested-by: Mathias Steiger <mathias.steiger@googlemail.com>
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Tested-by: Neil Armstrong<narmstrong@baylibre.com>
Tested-by: Philip Milev <milev.philip@gmail.com>
---
 drivers/gpu/drm/meson/meson_registers.h | 5 +++++
 drivers/gpu/drm/meson/meson_viu.c       | 7 ++++++-
 2 files changed, 11 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/meson/meson_registers.h b/drivers/gpu/drm/meson/meson_registers.h
index 446e7961da48..0f3cafab8860 100644
--- a/drivers/gpu/drm/meson/meson_registers.h
+++ b/drivers/gpu/drm/meson/meson_registers.h
@@ -634,6 +634,11 @@
 #define VPP_WRAP_OSD3_MATRIX_PRE_OFFSET2 0x3dbc
 #define VPP_WRAP_OSD3_MATRIX_EN_CTRL 0x3dbd
 
+/* osd1 HDR */
+#define OSD1_HDR2_CTRL 0x38a0
+#define OSD1_HDR2_CTRL_VDIN0_HDR2_TOP_EN       BIT(13)
+#define OSD1_HDR2_CTRL_REG_ONLY_MAT            BIT(16)
+
 /* osd2 scaler */
 #define OSD2_VSC_PHASE_STEP 0x3d00
 #define OSD2_VSC_INI_PHASE 0x3d01
diff --git a/drivers/gpu/drm/meson/meson_viu.c b/drivers/gpu/drm/meson/meson_viu.c
index aede0c67a57f..259f3e6bec90 100644
--- a/drivers/gpu/drm/meson/meson_viu.c
+++ b/drivers/gpu/drm/meson/meson_viu.c
@@ -425,9 +425,14 @@ void meson_viu_init(struct meson_drm *priv)
 	if (meson_vpu_is_compatible(priv, VPU_COMPATIBLE_GXM) ||
 	    meson_vpu_is_compatible(priv, VPU_COMPATIBLE_GXL))
 		meson_viu_load_matrix(priv);
-	else if (meson_vpu_is_compatible(priv, VPU_COMPATIBLE_G12A))
+	else if (meson_vpu_is_compatible(priv, VPU_COMPATIBLE_G12A)) {
 		meson_viu_set_g12a_osd1_matrix(priv, RGB709_to_YUV709l_coeff,
 					       true);
+		/* fix green/pink color distortion from vendor u-boot */
+		writel_bits_relaxed(OSD1_HDR2_CTRL_REG_ONLY_MAT |
+				OSD1_HDR2_CTRL_VDIN0_HDR2_TOP_EN, 0,
+				priv->io_base + _REG(OSD1_HDR2_CTRL));
+	}
 
 	/* Initialize OSD1 fifo control register */
 	reg = VIU_OSD_DDR_PRIORITY_URGENT |
-- 
2.17.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

             reply	other threads:[~2021-08-06  9:40 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-08-06  9:40 Christian Hewitt [this message]
2021-08-06  9:40 ` [PATCH] drm/meson: fix colour distortion from HDR set during vendor u-boot Christian Hewitt
2021-08-06  9:40 ` Christian Hewitt
2021-08-10  7:56 ` Neil Armstrong
2021-08-10  7:56   ` Neil Armstrong
2021-08-10  7:56   ` Neil Armstrong

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210806094005.7136-1-christianshewitt@gmail.com \
    --to=christianshewitt@gmail.com \
    --cc=devicetree@vger.kernel.org \
    --cc=khilman@baylibre.com \
    --cc=linux-amlogic@lists.infradead.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=mathias.steiger@googlemail.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.