All of lore.kernel.org
 help / color / mirror / Atom feed
From: Dario Binacchi <dariobin@libero.it>
To: linux-kernel@vger.kernel.org
Cc: Gianluca Falavigna <gianluca.falavigna@inwind.it>,
	Dario Binacchi <dariobin@libero.it>, Andrew Lunn <andrew@lunn.ch>,
	"David S. Miller" <davem@davemloft.net>,
	Jakub Kicinski <kuba@kernel.org>,
	Marc Kleine-Budde <mkl@pengutronix.de>,
	Oliver Hartkopp <socketcan@hartkopp.net>,
	Vincent Mailhol <mailhol.vincent@wanadoo.fr>,
	Wolfgang Grandegger <wg@grandegger.com>,
	linux-can@vger.kernel.org, netdev@vger.kernel.org
Subject: [PATCH v3 4/4] can: c_can: cache frames to operate as a true FIFO
Date: Sat,  7 Aug 2021 15:08:00 +0200	[thread overview]
Message-ID: <20210807130800.5246-5-dariobin@libero.it> (raw)
In-Reply-To: <20210807130800.5246-1-dariobin@libero.it>

As reported by a comment in the c_can_start_xmit() this was not a FIFO.
C/D_CAN controller sends out the buffers prioritized so that the lowest
buffer number wins.

What did c_can_start_xmit() do if head was less tail in the tx ring ? It
waited until all the frames queued in the FIFO was actually transmitted
by the controller before accepting a new CAN frame to transmit, even if
the FIFO was not full, to ensure that the messages were transmitted in
the order in which they were loaded.

By storing the frames in the FIFO without requiring its transmission, we
will be able to use the full size of the FIFO even in cases such as the
one described above. The transmission interrupt will trigger their
transmission only when all the messages previously loaded but stored in
less priority positions of the buffers have been transmitted.

Suggested-by: Gianluca Falavigna <gianluca.falavigna@inwind.it>
Signed-off-by: Dario Binacchi <dariobin@libero.it>

---

Changes in v3:
- Remove the transmission spin_lock.
- Use IF_RX in c_can_do_tx().

 drivers/net/can/c_can/c_can.h      | 11 +----------
 drivers/net/can/c_can/c_can_main.c | 23 ++++++++++++++++++-----
 2 files changed, 19 insertions(+), 15 deletions(-)

diff --git a/drivers/net/can/c_can/c_can.h b/drivers/net/can/c_can/c_can.h
index 9b4e54c950a6..08b6efa7a1a7 100644
--- a/drivers/net/can/c_can/c_can.h
+++ b/drivers/net/can/c_can/c_can.h
@@ -238,16 +238,7 @@ static inline u8 c_can_get_tx_tail(const struct c_can_tx_ring *ring)
 
 static inline u8 c_can_get_tx_free(const struct c_can_tx_ring *ring)
 {
-	u8 head = c_can_get_tx_head(ring);
-	u8 tail = c_can_get_tx_tail(ring);
-
-	/* This is not a FIFO. C/D_CAN sends out the buffers
-	 * prioritized. The lowest buffer number wins.
-	 */
-	if (head < tail)
-		return 0;
-
-	return ring->obj_num - head;
+	return ring->obj_num - (ring->head - ring->tail);
 }
 
 #endif /* C_CAN_H */
diff --git a/drivers/net/can/c_can/c_can_main.c b/drivers/net/can/c_can/c_can_main.c
index 80a6196a8d7a..e26b097b11ff 100644
--- a/drivers/net/can/c_can/c_can_main.c
+++ b/drivers/net/can/c_can/c_can_main.c
@@ -456,7 +456,7 @@ static netdev_tx_t c_can_start_xmit(struct sk_buff *skb,
 	struct can_frame *frame = (struct can_frame *)skb->data;
 	struct c_can_priv *priv = netdev_priv(dev);
 	struct c_can_tx_ring *tx_ring = &priv->tx;
-	u32 idx, obj;
+	u32 idx, obj, cmd = IF_COMM_TX;
 
 	if (can_dropped_invalid_skb(dev, skb))
 		return NETDEV_TX_OK;
@@ -469,7 +469,8 @@ static netdev_tx_t c_can_start_xmit(struct sk_buff *skb,
 	if (c_can_get_tx_free(tx_ring) == 0)
 		netif_stop_queue(dev);
 
-	obj = idx + priv->msg_obj_tx_first;
+	if (idx < c_can_get_tx_tail(tx_ring))
+		cmd &= ~IF_COMM_TXRQST; /* Cache the message */
 
 	/* Store the message in the interface so we can call
 	 * can_put_echo_skb(). We must do this before we enable
@@ -478,9 +479,8 @@ static netdev_tx_t c_can_start_xmit(struct sk_buff *skb,
 	c_can_setup_tx_object(dev, IF_TX, frame, idx);
 	priv->dlc[idx] = frame->len;
 	can_put_echo_skb(skb, dev, idx, 0);
-
-	/* Start transmission */
-	c_can_object_put(dev, IF_TX, obj, IF_COMM_TX);
+	obj = idx + priv->msg_obj_tx_first;
+	c_can_object_put(dev, IF_TX, obj, cmd);
 
 	return NETDEV_TX_OK;
 }
@@ -725,6 +725,7 @@ static void c_can_do_tx(struct net_device *dev)
 	struct c_can_tx_ring *tx_ring = &priv->tx;
 	struct net_device_stats *stats = &dev->stats;
 	u32 idx, obj, pkts = 0, bytes = 0, pend;
+	u8 tail;
 
 	if (priv->msg_obj_tx_last > 32)
 		pend = priv->read_reg32(priv, C_CAN_INTPND3_REG);
@@ -761,6 +762,18 @@ static void c_can_do_tx(struct net_device *dev)
 	stats->tx_bytes += bytes;
 	stats->tx_packets += pkts;
 	can_led_event(dev, CAN_LED_EVENT_TX);
+
+	tail = c_can_get_tx_tail(tx_ring);
+
+	if (tail == 0) {
+		u8 head = c_can_get_tx_head(tx_ring);
+
+		/* Start transmission for all cached messages */
+		for (idx = tail; idx < head; idx++) {
+			obj = idx + priv->msg_obj_tx_first;
+			c_can_object_put(dev, IF_RX, obj, IF_COMM_TXRQST);
+		}
+	}
 }
 
 /* If we have a gap in the pending bits, that means we either
-- 
2.17.1


  parent reply	other threads:[~2021-08-07 13:08 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-08-07 13:07 [PATCH v3 0/4] can: c_can: cache frames to operate as a true FIFO Dario Binacchi
2021-08-07 13:07 ` [PATCH v3 1/4] can: c_can: remove struct c_can_priv::priv field Dario Binacchi
2021-08-07 13:07 ` [PATCH v3 2/4] can: c_can: exit c_can_do_tx() early if no frames have been sent Dario Binacchi
2021-08-07 13:07 ` [PATCH v3 3/4] can: c_can: support tx ring algorithm Dario Binacchi
2021-08-07 13:08 ` Dario Binacchi [this message]
2021-08-09  7:08 ` [PATCH v3 0/4] can: c_can: cache frames to operate as a true FIFO Marc Kleine-Budde

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210807130800.5246-5-dariobin@libero.it \
    --to=dariobin@libero.it \
    --cc=andrew@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=gianluca.falavigna@inwind.it \
    --cc=kuba@kernel.org \
    --cc=linux-can@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mailhol.vincent@wanadoo.fr \
    --cc=mkl@pengutronix.de \
    --cc=netdev@vger.kernel.org \
    --cc=socketcan@hartkopp.net \
    --cc=wg@grandegger.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.