All of lore.kernel.org
 help / color / mirror / Atom feed
From: Liam Beguin <liambeguin@gmail.com>
To: liambeguin@gmail.com, lars@metafoo.de,
	Michael.Hennerich@analog.com, jic23@kernel.org,
	charles-antoine.couret@essensium.com, Nuno.Sa@analog.com
Cc: linux-kernel@vger.kernel.org, linux-iio@vger.kernel.org,
	devicetree@vger.kernel.org, robh+dt@kernel.org
Subject: [PATCH v5 2/5] iio: adc: ad7949: fix spi messages on non 14-bit controllers
Date: Sat,  7 Aug 2021 21:56:56 -0400	[thread overview]
Message-ID: <20210808015659.2955443-3-liambeguin@gmail.com> (raw)
In-Reply-To: <20210808015659.2955443-1-liambeguin@gmail.com>

From: Liam Beguin <lvb@xiphos.com>

This driver supports devices with 14-bit and 16-bit sample sizes.
This is not always handled properly by spi controllers and can fail. To
work around this limitation, pad samples to 16-bit and split the sample
into two 8-bit messages in the event that only 8-bit messages are
supported by the controller.

Signed-off-by: Liam Beguin <lvb@xiphos.com>
---
 drivers/iio/adc/ad7949.c | 75 +++++++++++++++++++++++++++++++++-------
 1 file changed, 63 insertions(+), 12 deletions(-)

diff --git a/drivers/iio/adc/ad7949.c b/drivers/iio/adc/ad7949.c
index 937241ee2a22..3f94ae639a44 100644
--- a/drivers/iio/adc/ad7949.c
+++ b/drivers/iio/adc/ad7949.c
@@ -14,7 +14,6 @@
 #include <linux/bitfield.h>
 
 #define AD7949_MASK_TOTAL		GENMASK(13, 0)
-#define AD7949_CFG_REG_SIZE_BITS	14
 
 /* CFG: Configuration Update */
 #define AD7949_CFG_BIT_OVERWRITE	BIT(13)
@@ -68,9 +67,11 @@ static const struct ad7949_adc_spec ad7949_adc_spec[] = {
  * @indio_dev: reference to iio structure
  * @spi: reference to spi structure
  * @resolution: resolution of the chip
+ * @bits_per_word: number of bits per SPI word
  * @cfg: copy of the configuration register
  * @current_channel: current channel in use
  * @buffer: buffer to send / receive data to / from device
+ * @buf8b: be16 buffer to exchange data with the device in 8-bit transfers
  */
 struct ad7949_adc_chip {
 	struct mutex lock;
@@ -78,28 +79,46 @@ struct ad7949_adc_chip {
 	struct iio_dev *indio_dev;
 	struct spi_device *spi;
 	u8 resolution;
+	u8 bits_per_word;
 	u16 cfg;
 	unsigned int current_channel;
 	u16 buffer ____cacheline_aligned;
+	__be16 buf8b;
 };
 
 static int ad7949_spi_write_cfg(struct ad7949_adc_chip *ad7949_adc, u16 val,
 				u16 mask)
 {
 	int ret;
-	int bits_per_word = ad7949_adc->resolution;
-	int shift = bits_per_word - AD7949_CFG_REG_SIZE_BITS;
 	struct spi_message msg;
 	struct spi_transfer tx[] = {
 		{
-			.tx_buf = &ad7949_adc->buffer,
 			.len = 2,
-			.bits_per_word = bits_per_word,
+			.bits_per_word = ad7949_adc->bits_per_word,
 		},
 	};
 
 	ad7949_adc->cfg = (val & mask) | (ad7949_adc->cfg & ~mask);
-	ad7949_adc->buffer = ad7949_adc->cfg << shift;
+
+	switch (ad7949_adc->bits_per_word) {
+	case 16:
+		tx[0].tx_buf = &ad7949_adc->buffer;
+		ad7949_adc->buffer = ad7949_adc->cfg << 2;
+		break;
+	case 14:
+		tx[0].tx_buf = &ad7949_adc->buffer;
+		ad7949_adc->buffer = ad7949_adc->cfg;
+		break;
+	case 8:
+		/* Here, type is big endian as it must be sent in two transfers */
+		tx[0].tx_buf = &ad7949_adc->buf8b;
+		ad7949_adc->buf8b = cpu_to_be16(ad7949_adc->cfg << 2);
+		break;
+	default:
+		dev_err(&ad7949_adc->indio_dev->dev, "unsupported BPW\n");
+		return -EINVAL;
+	}
+
 	spi_message_init_with_transfers(&msg, tx, 1);
 	ret = spi_sync(ad7949_adc->spi, &msg);
 
@@ -116,17 +135,19 @@ static int ad7949_spi_read_channel(struct ad7949_adc_chip *ad7949_adc, int *val,
 {
 	int ret;
 	int i;
-	int bits_per_word = ad7949_adc->resolution;
-	int mask = GENMASK(ad7949_adc->resolution - 1, 0);
 	struct spi_message msg;
 	struct spi_transfer tx[] = {
 		{
-			.rx_buf = &ad7949_adc->buffer,
 			.len = 2,
-			.bits_per_word = bits_per_word,
+			.bits_per_word = ad7949_adc->bits_per_word,
 		},
 	};
 
+	if (ad7949_adc->bits_per_word == 8)
+		tx[0].rx_buf = &ad7949_adc->buf8b;
+	else
+		tx[0].rx_buf = &ad7949_adc->buffer;
+
 	/*
 	 * 1: write CFG for sample N and read old data (sample N-2)
 	 * 2: if CFG was not changed since sample N-1 then we'll get good data
@@ -144,7 +165,6 @@ static int ad7949_spi_read_channel(struct ad7949_adc_chip *ad7949_adc, int *val,
 	}
 
 	/* 3: write something and read actual data */
-	ad7949_adc->buffer = 0;
 	spi_message_init_with_transfers(&msg, tx, 1);
 	ret = spi_sync(ad7949_adc->spi, &msg);
 	if (ret)
@@ -158,7 +178,25 @@ static int ad7949_spi_read_channel(struct ad7949_adc_chip *ad7949_adc, int *val,
 
 	ad7949_adc->current_channel = channel;
 
-	*val = ad7949_adc->buffer & mask;
+	switch (ad7949_adc->bits_per_word) {
+	case 16:
+		*val = ad7949_adc->buffer;
+		/* Shift-out padding bits */
+		*val >>= 16 - ad7949_adc->resolution;
+		break;
+	case 14:
+		*val = ad7949_adc->buffer & GENMASK(13, 0);
+		break;
+	case 8:
+		/* Here, type is big endian as data was sent in two transfers */
+		*val = be16_to_cpu(ad7949_adc->buf8b);
+		/* Shift-out padding bits */
+		*val >>= 16 - ad7949_adc->resolution;
+		break;
+	default:
+		dev_err(&ad7949_adc->indio_dev->dev, "unsupported BPW\n");
+		return -EINVAL;
+	}
 
 	return 0;
 }
@@ -266,6 +304,7 @@ static int ad7949_spi_init(struct ad7949_adc_chip *ad7949_adc)
 
 static int ad7949_spi_probe(struct spi_device *spi)
 {
+	u32 spi_ctrl_mask = spi->controller->bits_per_word_mask;
 	struct device *dev = &spi->dev;
 	const struct ad7949_adc_spec *spec;
 	struct ad7949_adc_chip *ad7949_adc;
@@ -292,6 +331,18 @@ static int ad7949_spi_probe(struct spi_device *spi)
 	indio_dev->num_channels = spec->num_channels;
 	ad7949_adc->resolution = spec->resolution;
 
+	/* Set SPI bits per word */
+	if (spi_ctrl_mask & SPI_BPW_MASK(ad7949_adc->resolution)) {
+		ad7949_adc->bits_per_word = ad7949_adc->resolution;
+	} else if (spi_ctrl_mask == SPI_BPW_MASK(16)) {
+		ad7949_adc->bits_per_word = 16;
+	} else if (spi_ctrl_mask == SPI_BPW_MASK(8)) {
+		ad7949_adc->bits_per_word = 8;
+	} else {
+		dev_err(dev, "unable to find common BPW with spi controller\n");
+		return -EINVAL;
+	}
+
 	ad7949_adc->vref = devm_regulator_get(dev, "vref");
 	if (IS_ERR(ad7949_adc->vref)) {
 		dev_err(dev, "fail to request regulator\n");
-- 
2.32.0.452.g940fe202adcb


  parent reply	other threads:[~2021-08-08  1:57 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-08-08  1:56 [PATCH v5 0/5] AD7949 Fixes Liam Beguin
2021-08-08  1:56 ` [PATCH v5 1/5] iio: adc: ad7949: define and use bitfield names Liam Beguin
2021-08-08 16:51   ` Joe Perches
2021-08-08 22:46     ` Liam Beguin
2021-08-09 20:03       ` Joe Perches
2021-08-08  1:56 ` Liam Beguin [this message]
2021-08-08  1:56 ` [PATCH v5 3/5] iio: adc: ad7949: add support for internal vref Liam Beguin
2021-08-08 16:36   ` Jonathan Cameron
2021-08-08 22:43     ` Liam Beguin
2021-08-09 19:42       ` Jonathan Cameron
2021-08-13 20:51         ` Liam Beguin
2021-08-16  8:07           ` Andy Shevchenko
2021-08-10 12:15       ` Andy Shevchenko
2021-08-10 19:46         ` Liam Beguin
2021-08-10 19:55           ` Andy Shevchenko
2021-08-10 20:51             ` Liam Beguin
2021-08-08  1:56 ` [PATCH v5 4/5] dt-bindings: iio: adc: ad7949: add per channel reference Liam Beguin
2021-08-08  1:56 ` [PATCH v5 5/5] iio: adc: ad7949: use devm managed functions Liam Beguin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210808015659.2955443-3-liambeguin@gmail.com \
    --to=liambeguin@gmail.com \
    --cc=Michael.Hennerich@analog.com \
    --cc=Nuno.Sa@analog.com \
    --cc=charles-antoine.couret@essensium.com \
    --cc=devicetree@vger.kernel.org \
    --cc=jic23@kernel.org \
    --cc=lars@metafoo.de \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.