All of lore.kernel.org
 help / color / mirror / Atom feed
From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To: Hans de Goede <hdegoede@redhat.com>,
	Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
	Kate Hsuan <hpa@redhat.com>,
	Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>,
	linux-kernel@vger.kernel.org,
	platform-driver-x86@vger.kernel.org, Dell.Client.Kernel@dell.com
Cc: Mark Gross <mgross@linux.intel.com>,
	Alex Hung <alex.hung@canonical.com>,
	Rajneesh Bhardwaj <irenic.rajneesh@gmail.com>,
	David E Box <david.e.box@intel.com>,
	Zha Qipeng <qipeng.zha@intel.com>,
	Mika Westerberg <mika.westerberg@linux.intel.com>,
	"David E. Box" <david.e.box@linux.intel.com>,
	AceLan Kao <acelan.kao@canonical.com>,
	Jithu Joseph <jithu.joseph@intel.com>,
	Maurice Ma <maurice.ma@intel.com>
Subject: [PATCH v4 06/21] platform/x86: intel_scu: Move to intel sub-directory
Date: Thu, 19 Aug 2021 19:37:20 +0300	[thread overview]
Message-ID: <20210819163735.81803-7-andriy.shevchenko@linux.intel.com> (raw)
In-Reply-To: <20210819163735.81803-1-andriy.shevchenko@linux.intel.com>

From: Kate Hsuan <hpa@redhat.com>

Move Intel SCU drivers to intel sub-directory to improve readability.

Signed-off-by: Kate Hsuan <hpa@redhat.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 MAINTAINERS                                   |  2 +-
 drivers/platform/x86/Kconfig                  | 47 -----------------
 drivers/platform/x86/Makefile                 |  5 --
 drivers/platform/x86/intel/Kconfig            |  1 +
 drivers/platform/x86/intel/Makefile           |  1 +
 drivers/platform/x86/intel/scu/Kconfig        | 51 +++++++++++++++++++
 drivers/platform/x86/intel/scu/Makefile       | 15 ++++++
 .../x86/{intel_scu_ipc.c => intel/scu/ipc.c}  |  0
 .../scu/ipcutil.c}                            |  0
 .../scu/pcidrv.c}                             |  0
 .../scu/pltdrv.c}                             |  0
 .../x86/{intel_scu_wdt.c => intel/scu/wdt.c}  |  0
 12 files changed, 69 insertions(+), 53 deletions(-)
 create mode 100644 drivers/platform/x86/intel/scu/Kconfig
 create mode 100644 drivers/platform/x86/intel/scu/Makefile
 rename drivers/platform/x86/{intel_scu_ipc.c => intel/scu/ipc.c} (100%)
 rename drivers/platform/x86/{intel_scu_ipcutil.c => intel/scu/ipcutil.c} (100%)
 rename drivers/platform/x86/{intel_scu_pcidrv.c => intel/scu/pcidrv.c} (100%)
 rename drivers/platform/x86/{intel_scu_pltdrv.c => intel/scu/pltdrv.c} (100%)
 rename drivers/platform/x86/{intel_scu_wdt.c => intel/scu/wdt.c} (100%)

diff --git a/MAINTAINERS b/MAINTAINERS
index eefe4edb1b3d..aa08fdb02ecb 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -9527,7 +9527,7 @@ INTEL SCU DRIVERS
 M:	Mika Westerberg <mika.westerberg@linux.intel.com>
 S:	Maintained
 F:	arch/x86/include/asm/intel_scu_ipc.h
-F:	drivers/platform/x86/intel_scu_*
+F:	drivers/platform/x86/intel/scu/
 
 INTEL SKYLAKE INT3472 ACPI DEVICE DRIVER
 M:	Daniel Scally <djrscally@gmail.com>
diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index aed7570388ef..1b85a1f6fc5f 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -1159,53 +1159,6 @@ config INTEL_UNCORE_FREQ_CONTROL
 	  To compile this driver as a module, choose M here: the module
 	  will be called intel-uncore-frequency.
 
-config INTEL_SCU_IPC
-	bool
-
-config INTEL_SCU
-	bool
-	select INTEL_SCU_IPC
-
-config INTEL_SCU_PCI
-	bool "Intel SCU PCI driver"
-	depends on PCI
-	select INTEL_SCU
-	help
-	  This driver is used to bridge the communications between kernel
-	  and SCU on some embedded Intel x86 platforms. It also creates
-	  devices that are connected to the SoC through the SCU.
-	  Platforms supported:
-	    Medfield
-	    Clovertrail
-	    Merrifield
-	    Broxton
-	    Apollo Lake
-
-config INTEL_SCU_PLATFORM
-	tristate "Intel SCU platform driver"
-	depends on ACPI
-	select INTEL_SCU
-	help
-	  This driver is used to bridge the communications between kernel
-	  and SCU (sometimes called PMC as well). The driver currently
-	  supports Intel Elkhart Lake and compatible platforms.
-
-config INTEL_SCU_WDT
-	bool
-	default INTEL_SCU_PCI
-	depends on INTEL_MID_WATCHDOG
-	help
-	  This is a specific platform code to instantiate watchdog device
-	  on ACPI-based Intel MID platforms.
-
-config INTEL_SCU_IPC_UTIL
-	tristate "Intel SCU IPC utility driver"
-	depends on INTEL_SCU
-	help
-	  The IPC Util driver provides an interface with the SCU enabling
-	  low level access for debug work and updating the firmware. Say
-	  N unless you will be doing this on an Intel MID platform.
-
 config INTEL_TELEMETRY
 	tristate "Intel SoC Telemetry Driver"
 	depends on X86_64
diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile
index 1668f7360833..026c97ba68f6 100644
--- a/drivers/platform/x86/Makefile
+++ b/drivers/platform/x86/Makefile
@@ -127,11 +127,6 @@ obj-$(CONFIG_INTEL_TURBO_MAX_3)			+= intel_turbo_max_3.o
 obj-$(CONFIG_INTEL_UNCORE_FREQ_CONTROL)		+= intel-uncore-frequency.o
 
 # Intel PMIC / PMC / P-Unit devices
-obj-$(CONFIG_INTEL_SCU_IPC)		+= intel_scu_ipc.o
-obj-$(CONFIG_INTEL_SCU_PCI)		+= intel_scu_pcidrv.o
-obj-$(CONFIG_INTEL_SCU_PLATFORM)	+= intel_scu_pltdrv.o
-obj-$(CONFIG_INTEL_SCU_WDT)		+= intel_scu_wdt.o
-obj-$(CONFIG_INTEL_SCU_IPC_UTIL)	+= intel_scu_ipcutil.o
 obj-$(CONFIG_INTEL_TELEMETRY)		+= intel_telemetry_core.o \
 					   intel_telemetry_pltdrv.o \
 					   intel_telemetry_debugfs.o
diff --git a/drivers/platform/x86/intel/Kconfig b/drivers/platform/x86/intel/Kconfig
index 7de11636904d..72f4a5b79342 100644
--- a/drivers/platform/x86/intel/Kconfig
+++ b/drivers/platform/x86/intel/Kconfig
@@ -21,6 +21,7 @@ source "drivers/platform/x86/intel/int33fe/Kconfig"
 source "drivers/platform/x86/intel/int3472/Kconfig"
 source "drivers/platform/x86/intel/pmc/Kconfig"
 source "drivers/platform/x86/intel/pmt/Kconfig"
+source "drivers/platform/x86/intel/scu/Kconfig"
 
 config INTEL_BXTWC_PMIC_TMU
 	tristate "Intel Broxton Whiskey Cove TMU Driver"
diff --git a/drivers/platform/x86/intel/Makefile b/drivers/platform/x86/intel/Makefile
index a1555a1e421d..15e5124d70ec 100644
--- a/drivers/platform/x86/intel/Makefile
+++ b/drivers/platform/x86/intel/Makefile
@@ -9,6 +9,7 @@ obj-$(CONFIG_INTEL_CHT_INT33FE)		+= int33fe/
 obj-$(CONFIG_INTEL_SKL_INT3472)		+= int3472/
 obj-$(CONFIG_INTEL_PMC_CORE)		+= pmc/
 obj-$(CONFIG_INTEL_PMT_CLASS)		+= pmt/
+obj-$(CONFIG_INTEL_SCU)			+= scu/
 
 # Intel PMIC / PMC / P-Unit drivers
 intel_bxtwc_tmu-y			:= bxtwc_tmu.o
diff --git a/drivers/platform/x86/intel/scu/Kconfig b/drivers/platform/x86/intel/scu/Kconfig
new file mode 100644
index 000000000000..5ce2554e2b90
--- /dev/null
+++ b/drivers/platform/x86/intel/scu/Kconfig
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Intel x86 Platform-Specific Drivers
+#
+
+config INTEL_SCU_IPC
+	bool
+
+config INTEL_SCU_IPC_UTIL
+	tristate "Intel SCU IPC utility driver"
+	depends on INTEL_SCU
+	help
+	  The IPC utility driver provides an interface with the SCU enabling
+	  low level access for debug work and updating the firmware.
+	  Say N unless you will be doing this on an Intel MID platform.
+
+config INTEL_SCU
+	bool
+	select INTEL_SCU_IPC
+
+config INTEL_SCU_PCI
+	bool "Intel SCU PCI driver"
+	depends on PCI
+	select INTEL_SCU
+	help
+	  This driver is used to bridge the communications between kernel
+	  and SCU on some embedded Intel x86 platforms. It also creates
+	  devices that are connected to the SoC through the SCU.
+	  Platforms supported:
+	    Medfield
+	    Clovertrail
+	    Merrifield
+	    Broxton
+	    Apollo Lake
+
+config INTEL_SCU_PLATFORM
+	tristate "Intel SCU platform driver"
+	depends on ACPI
+	select INTEL_SCU
+	help
+	  This driver is used to bridge the communications between kernel
+	  and SCU (sometimes called PMC as well). The driver currently
+	  supports Intel Elkhart Lake and compatible platforms.
+
+config INTEL_SCU_WDT
+	bool
+	default INTEL_SCU_PCI
+	depends on INTEL_MID_WATCHDOG
+	help
+	  This is a specific platform code to instantiate watchdog device
+	  on ACPI-based Intel MID platforms.
diff --git a/drivers/platform/x86/intel/scu/Makefile b/drivers/platform/x86/intel/scu/Makefile
new file mode 100644
index 000000000000..601a720f97dc
--- /dev/null
+++ b/drivers/platform/x86/intel/scu/Makefile
@@ -0,0 +1,15 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Intel x86 Platform-Specific Drivers
+#
+
+intel_scu_ipc-y				:= ipc.o
+obj-$(CONFIG_INTEL_SCU_IPC)		+= intel_scu_ipc.o
+intel_scu_ipcutil-y			:= ipcutil.o
+obj-$(CONFIG_INTEL_SCU_IPC_UTIL)	+= intel_scu_ipcutil.o
+intel_scu_pci-y				:= pcidrv.o
+obj-$(CONFIG_INTEL_SCU_PCI)		+= intel_scu_pcidrv.o
+intel_scu_pltdrv-y			:= pltdrv.o
+obj-$(CONFIG_INTEL_SCU_PLATFORM)	+= intel_scu_pltdrv.o
+intel_scu_wdt-y				:= wdt.o
+obj-$(CONFIG_INTEL_SCU_WDT)		+= intel_scu_wdt.o
diff --git a/drivers/platform/x86/intel_scu_ipc.c b/drivers/platform/x86/intel/scu/ipc.c
similarity index 100%
rename from drivers/platform/x86/intel_scu_ipc.c
rename to drivers/platform/x86/intel/scu/ipc.c
diff --git a/drivers/platform/x86/intel_scu_ipcutil.c b/drivers/platform/x86/intel/scu/ipcutil.c
similarity index 100%
rename from drivers/platform/x86/intel_scu_ipcutil.c
rename to drivers/platform/x86/intel/scu/ipcutil.c
diff --git a/drivers/platform/x86/intel_scu_pcidrv.c b/drivers/platform/x86/intel/scu/pcidrv.c
similarity index 100%
rename from drivers/platform/x86/intel_scu_pcidrv.c
rename to drivers/platform/x86/intel/scu/pcidrv.c
diff --git a/drivers/platform/x86/intel_scu_pltdrv.c b/drivers/platform/x86/intel/scu/pltdrv.c
similarity index 100%
rename from drivers/platform/x86/intel_scu_pltdrv.c
rename to drivers/platform/x86/intel/scu/pltdrv.c
diff --git a/drivers/platform/x86/intel_scu_wdt.c b/drivers/platform/x86/intel/scu/wdt.c
similarity index 100%
rename from drivers/platform/x86/intel_scu_wdt.c
rename to drivers/platform/x86/intel/scu/wdt.c
-- 
2.32.0


  parent reply	other threads:[~2021-08-19 16:38 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-08-19 16:37 [PATCH v4 00/21] platform/x86: Intel platform driver code movement Andy Shevchenko
2021-08-19 16:37 ` [PATCH v4 01/21] platform/x86: intel_bxtwc_tmu: Move to intel sub-directory Andy Shevchenko
2021-08-19 16:37 ` [PATCH v4 02/21] platform/x86: intel_chtdc_ti_pwrbtn: " Andy Shevchenko
2021-08-19 16:37 ` [PATCH v4 03/21] platform/x86: intel_mrfld_pwrbtn: " Andy Shevchenko
2021-08-19 16:37 ` [PATCH v4 04/21] platform/x86: intel_punit_ipc: " Andy Shevchenko
2021-08-19 16:37 ` [PATCH v4 05/21] platform/x86: intel_pmc_core: " Andy Shevchenko
2021-08-19 16:37 ` Andy Shevchenko [this message]
2021-08-19 16:37 ` [PATCH v4 07/21] platform/x86: intel_telemetry: " Andy Shevchenko
2021-08-19 16:37 ` [PATCH v4 08/21] platform/x86: intel_ips: " Andy Shevchenko
2021-08-19 16:37 ` [PATCH v4 09/21] platform/x86: intel-rst: " Andy Shevchenko
2021-08-19 16:37 ` [PATCH v4 10/21] platform/x86: intel-smartconnect: " Andy Shevchenko
2021-08-19 16:37 ` [PATCH v4 11/21] platform/x86: intel_turbo_max_3: " Andy Shevchenko
2021-08-19 16:37 ` [PATCH v4 12/21] platform/x86: intel-uncore-frequency: " Andy Shevchenko
2021-08-19 16:37 ` [PATCH v4 13/21] platform/x86: intel_speed_select_if: " Andy Shevchenko
2021-08-19 16:37 ` [PATCH v4 14/21] platform/x86: intel_atomisp2: " Andy Shevchenko
2021-08-19 16:37 ` [PATCH v4 15/21] platform/x86: intel-hid: " Andy Shevchenko
2021-08-19 16:37 ` [PATCH v4 16/21] platform/x86: intel_int0002_vgpio: " Andy Shevchenko
2021-08-19 16:37 ` [PATCH v4 17/21] platform/x86: intel_oaktrail: " Andy Shevchenko
2021-08-19 16:37 ` [PATCH v4 18/21] platform/x86: intel-vbtn: " Andy Shevchenko
2021-08-19 16:37 ` [PATCH v4 19/21] platform/x86: intel-wmi-sbl-fw-update: " Andy Shevchenko
2021-08-19 16:37 ` [PATCH v4 20/21] platform/x86: intel-wmi-thunderbolt: " Andy Shevchenko
2021-08-19 16:37 ` [PATCH v4 21/21] platform/x86/intel: scu: Fix doc of intel_scu_ipc_dev_command_with_size() Andy Shevchenko
2021-08-19 17:46 ` [PATCH v4 00/21] platform/x86: Intel platform driver code movement Andy Shevchenko
2021-08-19 18:46 ` Hans de Goede
2021-08-20 10:12   ` Andy Shevchenko
2021-08-20 10:22     ` Hans de Goede

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210819163735.81803-7-andriy.shevchenko@linux.intel.com \
    --to=andriy.shevchenko@linux.intel.com \
    --cc=Dell.Client.Kernel@dell.com \
    --cc=acelan.kao@canonical.com \
    --cc=alex.hung@canonical.com \
    --cc=david.e.box@intel.com \
    --cc=david.e.box@linux.intel.com \
    --cc=hdegoede@redhat.com \
    --cc=hpa@redhat.com \
    --cc=irenic.rajneesh@gmail.com \
    --cc=jithu.joseph@intel.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=maurice.ma@intel.com \
    --cc=mgross@linux.intel.com \
    --cc=mika.westerberg@linux.intel.com \
    --cc=platform-driver-x86@vger.kernel.org \
    --cc=qipeng.zha@intel.com \
    --cc=srinivas.pandruvada@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.