From: QI Fuli <fukuri.sai@gmail.com>
To: nvdimm@lists.linux.dev
Cc: QI Fuli <qi.fuli@fujitsu.com>
Subject: [ndctl PATCH 4/5] ndctl, config: add the default ndctl configuration file
Date: Mon, 23 Aug 2021 05:30:14 +0900 [thread overview]
Message-ID: <20210822203015.528438-5-qi.fuli@fujitsu.com> (raw)
In-Reply-To: <20210822203015.528438-1-qi.fuli@fujitsu.com>
From: QI Fuli <qi.fuli@fujitsu.com>
Install ndctl/ndctl.conf as the default ndctl configuration file.
Signed-off-by: QI Fuli <qi.fuli@fujitsu.com>
---
configure.ac | 2 ++
ndctl/Makefile.am | 4 +++-
ndctl/ndctl.conf | 56 +++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 61 insertions(+), 1 deletion(-)
create mode 100644 ndctl/ndctl.conf
diff --git a/configure.ac b/configure.ac
index 42a66e1..9e1c6db 100644
--- a/configure.ac
+++ b/configure.ac
@@ -172,8 +172,10 @@ AC_SUBST([systemd_unitdir])
AM_CONDITIONAL([ENABLE_SYSTEMD_UNITS], [test "x$with_systemd" = "xyes"])
ndctl_confdir=${sysconfdir}/ndctl
+ndctl_conf=ndctl.conf
ndctl_monitorconf=monitor.conf
AC_SUBST([ndctl_confdir])
+AC_SUBST([ndctl_conf])
AC_SUBST([ndctl_monitorconf])
daxctl_modprobe_datadir=${datadir}/daxctl
diff --git a/ndctl/Makefile.am b/ndctl/Makefile.am
index 1caa031..fceb3ab 100644
--- a/ndctl/Makefile.am
+++ b/ndctl/Makefile.am
@@ -43,7 +43,7 @@ keys_configdir = $(ndctl_keysdir)
keys_config_DATA = $(ndctl_keysreadme)
endif
-EXTRA_DIST += keys.readme monitor.conf ndctl-monitor.service
+EXTRA_DIST += keys.readme monitor.conf ndctl-monitor.service ndctl.conf
if ENABLE_DESTRUCTIVE
ndctl_SOURCES += ../test/blk_namespaces.c \
@@ -74,6 +74,8 @@ ndctl_SOURCES += ../test/libndctl.c \
test.c
endif
+ndctl_configdir = $(ndctl_confdir)
+ndctl_config_DATA = $(ndctl_conf)
monitor_configdir = $(ndctl_confdir)
monitor_config_DATA = $(ndctl_monitorconf)
diff --git a/ndctl/ndctl.conf b/ndctl/ndctl.conf
new file mode 100644
index 0000000..4b3eb7e
--- /dev/null
+++ b/ndctl/ndctl.conf
@@ -0,0 +1,56 @@
+# This is the default ndctl configuration file. It contains the
+# configuration directives that give ndctl instructions.
+# Ndctl supports multiple configuration files. All files with the
+# .conf suffix under "sysconfdir/ndctl/" can be regarded as ndctl
+# configuration files.
+
+# In this file, lines starting with a hash (#) are comments.
+# The configurations should be in a [section] and follow <key> = <value>
+# style. Multiple space-separated values are allowed, but except the
+# following characters: : ? / \ % " ' $ & ! * { } [ ] ( ) = < > @
+
+[core]
+# The values in [core] section work for all ndctl sub commands.
+# dimm = all
+# bus = all
+# region = all
+# namespace = all
+
+[monitor]
+# The values in [monitor] section work for ndctl monitor.
+# You can change the configuration of ndctl monitor by editing this
+# file or use [--config-file=<file>] option to override this one.
+# The changed value will work after restart ndctl monitor service.
+
+# The objects to monitor are filtered via dimm's name by setting key "dimm".
+# If this value is different from the value of [--dimm=<value>] option,
+# both of the values will work.
+# dimm = all
+
+# The objects to monitor are filtered via its parent bus by setting key "bus".
+# If this value is different from the value of [--bus=<value>] option,
+# both of the values will work.
+# bus = all
+
+# The objects to monitor are filtered via region by setting key "region".
+# If this value is different from the value of [--region=<value>] option,
+# both of the values will work.
+# region = all
+
+# The objects to monitor are filtered via namespace by setting key "namespace".
+# If this value is different from the value of [--namespace=<value>] option,
+# both of the values will work.
+# namespace = all
+
+# The DIMM events to monitor are filtered via event type by setting key
+# "dimm-event". If this value is different from the value of
+# [--dimm-event=<value>] option, both of the values will work.
+# dimm-event = all
+
+# Users can choose to output the notifications to syslog (log=syslog),
+# to standard output (log=standard) or to write into a special file (log=<file>)
+# by setting key "log". If this value is in conflict with the value of
+# [--log=<value>] option, this value will be ignored.
+# Note: Setting value to "standard" or relative path for <file> will not work
+# when running moniotr as a daemon.
+# log = /var/log/ndctl/monitor.log
--
2.31.1
next prev parent reply other threads:[~2021-08-22 20:30 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-08-22 20:30 [ndctl PATCH 0/5] make ndctl support global configuration files QI Fuli
2021-08-22 20:30 ` [ndctl PATCH 1/5] ndctl, ccan: import ciniparser QI Fuli
2021-08-23 16:48 ` Dan Williams
2021-08-23 19:41 ` Verma, Vishal L
2021-08-24 2:30 ` qi.fuli
2021-08-22 20:30 ` [ndctl PATCH 2/5] ndctl, util: add parse-configs helper QI Fuli
2021-08-22 20:30 ` [ndctl PATCH 3/5] ndctl: make ndctl support configuration files QI Fuli
2021-08-22 20:30 ` QI Fuli [this message]
2021-08-22 20:30 ` [ndctl PATCH 5/5] ndctl, monitor: refactor monitor for supporting multiple config files QI Fuli
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210822203015.528438-5-qi.fuli@fujitsu.com \
--to=fukuri.sai@gmail.com \
--cc=nvdimm@lists.linux.dev \
--cc=qi.fuli@fujitsu.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.