All of lore.kernel.org
 help / color / mirror / Atom feed
From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
To: Andy Gross <agross@kernel.org>,
	Bjorn Andersson <bjorn.andersson@linaro.org>,
	Ulf Hansson <ulf.hansson@linaro.org>,
	Marcel Holtmann <marcel@holtmann.org>,
	Johan Hedberg <johan.hedberg@gmail.com>,
	Luiz Augusto von Dentz <luiz.dentz@gmail.com>,
	Kalle Valo <kvalo@codeaurora.org>,
	"David S. Miller" <davem@davemloft.net>,
	Jakub Kicinski <kuba@kernel.org>,
	Stanimir Varbanov <svarbanov@mm-sol.com>
Cc: linux-arm-msm@vger.kernel.org, linux-mmc@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-bluetooth@vger.kernel.org,
	ath10k@lists.infradead.org, linux-wireless@vger.kernel.org,
	netdev@vger.kernel.org
Subject: [RFC v2 11/13] arm64: dts: qcom: sdm845-db845c: add second channel to qca power sequencer
Date: Sun, 29 Aug 2021 16:13:03 +0300	[thread overview]
Message-ID: <20210829131305.534417-12-dmitry.baryshkov@linaro.org> (raw)
In-Reply-To: <20210829131305.534417-1-dmitry.baryshkov@linaro.org>

On DB845c board WiFi/BT chip can use both RF channels/antennas, so add
vddch1-supply property.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 arch/arm64/boot/dts/qcom/sdm845-db845c.dts | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
index a6a34a959a91..0f3214c60980 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
@@ -342,6 +342,12 @@ vreg_l21a_2p95: ldo21 {
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
+		vreg_l23a_3p3: ldo23 {
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
 		vreg_l24a_3p075: ldo24 {
 			regulator-min-microvolt = <3088000>;
 			regulator-max-microvolt = <3088000>;
@@ -637,6 +643,7 @@ &qca_pwrseq {
 	vddxo-supply = <&vreg_l7a_1p8>;
 	vddrf-supply = <&vreg_l17a_1p3>;
 	vddch0-supply = <&vreg_l25a_3p3>;
+	vddch1-supply = <&vreg_l23a_3p3>;
 };
 
 &sdhc_2 {
-- 
2.33.0


WARNING: multiple messages have this Message-ID (diff)
From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
To: Andy Gross <agross@kernel.org>,
	Bjorn Andersson <bjorn.andersson@linaro.org>,
	Ulf Hansson <ulf.hansson@linaro.org>,
	Marcel Holtmann <marcel@holtmann.org>,
	Johan Hedberg <johan.hedberg@gmail.com>,
	Luiz Augusto von Dentz <luiz.dentz@gmail.com>,
	Kalle Valo <kvalo@codeaurora.org>,
	"David S. Miller" <davem@davemloft.net>,
	Jakub Kicinski <kuba@kernel.org>,
	Stanimir Varbanov <svarbanov@mm-sol.com>
Cc: linux-arm-msm@vger.kernel.org, linux-mmc@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-bluetooth@vger.kernel.org,
	ath10k@lists.infradead.org, linux-wireless@vger.kernel.org,
	netdev@vger.kernel.org
Subject: [RFC v2 11/13] arm64: dts: qcom: sdm845-db845c: add second channel to qca power sequencer
Date: Sun, 29 Aug 2021 16:13:03 +0300	[thread overview]
Message-ID: <20210829131305.534417-12-dmitry.baryshkov@linaro.org> (raw)
In-Reply-To: <20210829131305.534417-1-dmitry.baryshkov@linaro.org>

On DB845c board WiFi/BT chip can use both RF channels/antennas, so add
vddch1-supply property.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 arch/arm64/boot/dts/qcom/sdm845-db845c.dts | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
index a6a34a959a91..0f3214c60980 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
@@ -342,6 +342,12 @@ vreg_l21a_2p95: ldo21 {
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
+		vreg_l23a_3p3: ldo23 {
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
 		vreg_l24a_3p075: ldo24 {
 			regulator-min-microvolt = <3088000>;
 			regulator-max-microvolt = <3088000>;
@@ -637,6 +643,7 @@ &qca_pwrseq {
 	vddxo-supply = <&vreg_l7a_1p8>;
 	vddrf-supply = <&vreg_l17a_1p3>;
 	vddch0-supply = <&vreg_l25a_3p3>;
+	vddch1-supply = <&vreg_l23a_3p3>;
 };
 
 &sdhc_2 {
-- 
2.33.0


_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

  parent reply	other threads:[~2021-08-29 13:14 UTC|newest]

Thread overview: 41+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-08-29 13:12 [RFC v2 00/13] create power sequencing subsystem Dmitry Baryshkov
2021-08-29 13:12 ` Dmitry Baryshkov
2021-08-29 13:12 ` [RFC v2 01/13] power: add power sequencer subsystem Dmitry Baryshkov
2021-08-29 13:12   ` Dmitry Baryshkov
2021-08-29 14:02   ` create power sequencing subsystem bluez.test.bot
2021-08-29 15:16   ` [RFC v2 01/13] power: add power sequencer subsystem kernel test robot
2021-09-10 10:02   ` Ulf Hansson
2021-09-10 10:02     ` Ulf Hansson
2021-09-13 12:32     ` Dmitry Baryshkov
2021-09-13 12:32       ` Dmitry Baryshkov
2021-09-13 13:42       ` Ulf Hansson
2021-09-13 13:42         ` Ulf Hansson
2021-08-29 13:12 ` [RFC v2 02/13] pwrseq: port MMC's pwrseq drivers to new pwrseq subsystem Dmitry Baryshkov
2021-08-29 13:12   ` Dmitry Baryshkov
2021-08-29 13:12 ` [RFC v2 03/13] mmc: core: switch " Dmitry Baryshkov
2021-08-29 13:12   ` Dmitry Baryshkov
2021-08-29 13:12 ` [RFC v2 04/13] pwrseq: add support for QCA BT+WiFi power sequencer Dmitry Baryshkov
2021-08-29 13:12   ` Dmitry Baryshkov
2021-08-30 22:29   ` kernel test robot
2021-08-29 13:12 ` [RFC v2 05/13] pwrseq: add fallback support Dmitry Baryshkov
2021-08-29 13:12   ` Dmitry Baryshkov
2021-08-29 13:12 ` [RFC v2 06/13] pwrseq: pwrseq_qca: implement " Dmitry Baryshkov
2021-08-29 13:12   ` Dmitry Baryshkov
2021-08-29 13:12 ` [RFC v2 07/13] Bluetooth: hci_qca: switch to using pwrseq Dmitry Baryshkov
2021-08-29 13:12   ` Dmitry Baryshkov
2021-08-29 13:13 ` [RFC v2 08/13] ath10k: add support for pwrseq sequencing Dmitry Baryshkov
2021-08-29 13:13   ` Dmitry Baryshkov
2021-08-29 13:13 ` [RFC v2 09/13] arm64: dts: qcom: sdm845-db845c: switch bt+wifi to qca power sequencer Dmitry Baryshkov
2021-08-29 13:13   ` Dmitry Baryshkov
2021-08-29 13:13 ` [RFC v2 10/13] arm64: dts: qcom: qrb5165-rb5: add bluetooth support Dmitry Baryshkov
2021-08-29 13:13   ` Dmitry Baryshkov
2021-08-29 13:13 ` Dmitry Baryshkov [this message]
2021-08-29 13:13   ` [RFC v2 11/13] arm64: dts: qcom: sdm845-db845c: add second channel to qca power sequencer Dmitry Baryshkov
2021-08-29 13:13 ` [RFC v2 12/13] WIP: PCI: qcom: use pwrseq to power up bus devices Dmitry Baryshkov
2021-08-29 13:13   ` Dmitry Baryshkov
2021-08-29 13:13 ` [RFC v2 13/13] WIP: arm64: dts: qcom: qrb5165-rb5: add bus-pwrseq property to pcie0 Dmitry Baryshkov
2021-08-29 13:13   ` Dmitry Baryshkov
2021-09-13 23:39 ` [RFC v2 00/13] create power sequencing subsystem Steev Klimaszewski
2021-09-13 23:39   ` Steev Klimaszewski
2021-10-06  3:49   ` Dmitry Baryshkov
2021-10-06  3:49     ` Dmitry Baryshkov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210829131305.534417-12-dmitry.baryshkov@linaro.org \
    --to=dmitry.baryshkov@linaro.org \
    --cc=agross@kernel.org \
    --cc=ath10k@lists.infradead.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=davem@davemloft.net \
    --cc=johan.hedberg@gmail.com \
    --cc=kuba@kernel.org \
    --cc=kvalo@codeaurora.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-bluetooth@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=linux-wireless@vger.kernel.org \
    --cc=luiz.dentz@gmail.com \
    --cc=marcel@holtmann.org \
    --cc=netdev@vger.kernel.org \
    --cc=svarbanov@mm-sol.com \
    --cc=ulf.hansson@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.