From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
To: Geert Uytterhoeven <geert+renesas@glider.be>,
Magnus Damm <magnus.damm@gmail.com>,
Rob Herring <robh+dt@kernel.org>
Cc: linux-renesas-soc@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
Prabhakar <prabhakar.csengg@gmail.com>,
Biju Das <biju.das.jz@bp.renesas.com>,
Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Subject: [PATCH v2] arm64: dts: renesas: rzg2l-smarc: Enable CANFD
Date: Fri, 24 Sep 2021 11:23:38 +0100 [thread overview]
Message-ID: <20210924102338.11595-1-prabhakar.mahadev-lad.rj@bp.renesas.com> (raw)
Enable CANFD on RZ/G2L SMARC platform.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
v2:
-> Corrected STB pin states
---
arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi | 40 ++++++++++++++++++++
1 file changed, 40 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi b/arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi
index e895f6e7fa28..a02784fab46a 100644
--- a/arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi
+++ b/arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi
@@ -80,6 +80,20 @@
clock-frequency = <12288000>;
};
+&canfd {
+ pinctrl-0 = <&can0_pins &can1_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ channel0 {
+ status = "okay";
+ };
+
+ channel1 {
+ status = "okay";
+ };
+};
+
&ehci0 {
dr_mode = "otg";
status = "okay";
@@ -139,6 +153,32 @@
pinctrl-0 = <&sound_clk_pins>;
pinctrl-names = "default";
+ can0_pins: can0 {
+ pinmux = <RZG2L_PORT_PINMUX(10, 1, 2)>, /* TX */
+ <RZG2L_PORT_PINMUX(11, 0, 2)>; /* RX */
+ };
+
+ /* SW7 should be at position 2->3 so that GPIO8_CAN0_STB line is activated */
+ can0-stb {
+ gpio-hog;
+ gpios = <RZG2L_GPIO(42, 2) GPIO_ACTIVE_HIGH>;
+ output-low;
+ line-name = "can0_stb";
+ };
+
+ can1_pins: can1 {
+ pinmux = <RZG2L_PORT_PINMUX(12, 1, 2)>, /* TX */
+ <RZG2L_PORT_PINMUX(13, 0, 2)>; /* RX */
+ };
+
+ /* SW8 should be at position 2->3 so that GPIO9_CAN1_STB line is activated */
+ can1-stb {
+ gpio-hog;
+ gpios = <RZG2L_GPIO(42, 3) GPIO_ACTIVE_HIGH>;
+ output-low;
+ line-name = "can1_stb";
+ };
+
i2c0_pins: i2c0 {
pins = "RIIC0_SDA", "RIIC0_SCL";
input-enable;
--
2.17.1
reply other threads:[~2021-09-24 10:23 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210924102338.11595-1-prabhakar.mahadev-lad.rj@bp.renesas.com \
--to=prabhakar.mahadev-lad.rj@bp.renesas.com \
--cc=biju.das.jz@bp.renesas.com \
--cc=devicetree@vger.kernel.org \
--cc=geert+renesas@glider.be \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=magnus.damm@gmail.com \
--cc=prabhakar.csengg@gmail.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.