[PATCH 1/1] hw: aspeed_gpio: Fix pin I/O type declarations

[<pdel@fb.com>]

From: Peter Delevoryas <pdel@fb.com>

Some of the pin declarations in the Aspeed GPIO module were incorrect,
probably because of confusion over which bits in the input and output
uint32_t's correspond to which groups in the label array. Since the
uint32_t literals are in big endian, it's sort of the opposite of what
would be intuitive. The least significant bit in ast2500_set_props[6]
corresponds to GPIOY0, not GPIOAB7.

GPIOxx indicates input and output capabilities, GPIxx indicates only
input, GPOxx indicates only output.

AST2500:
- Previously had GPIW0..GPIW7 and GPIX0..GPIX7, that's correct.
- Previously had GPIOY0..GPIOY3, should have been GPIOY0..GPIOY7.
- Previously had GPIOAB0..GPIOAB3 and GPIAB4..GPIAB7, should only have
  been GPIOAB0..GPIOAB3.

AST2600:
- GPIOT0..GPIOT7 should have been GPIT0..GPIT7.
- GPIOU0..GPIOU7 should have been GPIU0..GPIU7.
- GPIW0..GPIW7 should have been GPIOW0..GPIOW7.
- GPIOY0..GPIOY7 and GPIOZ0...GPIOZ7 were disabled.

Fixes: 4b7f956862dc2db4c5c ("hw/gpio: Add basic Aspeed GPIO model for AST2400 and AST2500")
Fixes: 36d737ee82b2972167e ("hw/gpio: Add in AST2600 specific implementation")
Signed-off-by: Peter Delevoryas <pdel@fb.com>
---
 hw/gpio/aspeed_gpio.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/hw/gpio/aspeed_gpio.c b/hw/gpio/aspeed_gpio.c
index dfa6d6cb40..33a40a624a 100644
--- a/hw/gpio/aspeed_gpio.c
+++ b/hw/gpio/aspeed_gpio.c
@@ -796,7 +796,7 @@ static const GPIOSetProperties ast2500_set_props[] = {
     [3] = {0xffffffff,  0xffffffff,  {"M", "N", "O", "P"} },
     [4] = {0xffffffff,  0xffffffff,  {"Q", "R", "S", "T"} },
     [5] = {0xffffffff,  0x0000ffff,  {"U", "V", "W", "X"} },
-    [6] = {0xffffff0f,  0x0fffff0f,  {"Y", "Z", "AA", "AB"} },
+    [6] = {0x0fffffff,  0x0fffffff,  {"Y", "Z", "AA", "AB"} },
     [7] = {0x000000ff,  0x000000ff,  {"AC"} },
 };
 
@@ -805,9 +805,9 @@ static GPIOSetProperties ast2600_3_3v_set_props[] = {
     [1] = {0xffffffff,  0xffffffff,  {"E", "F", "G", "H"} },
     [2] = {0xffffffff,  0xffffffff,  {"I", "J", "K", "L"} },
     [3] = {0xffffffff,  0xffffffff,  {"M", "N", "O", "P"} },
-    [4] = {0xffffffff,  0xffffffff,  {"Q", "R", "S", "T"} },
-    [5] = {0xffffffff,  0x0000ffff,  {"U", "V", "W", "X"} },
-    [6] = {0xffff0000,  0x0fff0000,  {"Y", "Z", "", ""} },
+    [4] = {0xffffffff,  0x00ffffff,  {"Q", "R", "S", "T"} },
+    [5] = {0xffffffff,  0xffffff00,  {"U", "V", "W", "X"} },
+    [6] = {0x0000ffff,  0x0000ffff,  {"Y", "Z"} },
 };
 
 static GPIOSetProperties ast2600_1_8v_set_props[] = {
-- 
2.30.2