From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
To: Geert Uytterhoeven <geert+renesas@glider.be>,
Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@kernel.org>,
linux-renesas-soc@vger.kernel.org, linux-clk@vger.kernel.org
Cc: linux-kernel@vger.kernel.org,
Prabhakar <prabhakar.csengg@gmail.com>,
Biju Das <biju.das.jz@bp.renesas.com>,
Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Subject: [PATCH] clk: renesas: r9a07g044-cpg: Add clock and reset entries for SPI Multi I/O Bus Controller
Date: Tue, 28 Sep 2021 14:01:32 +0100 [thread overview]
Message-ID: <20210928130132.15022-1-prabhakar.mahadev-lad.rj@bp.renesas.com> (raw)
Add clock and reset entries for SPI Multi I/O Bus Controller.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
---
drivers/clk/renesas/r9a07g044-cpg.c | 18 ++++++++++++++++++
drivers/clk/renesas/rzg2l-cpg.h | 3 +++
2 files changed, 21 insertions(+)
diff --git a/drivers/clk/renesas/r9a07g044-cpg.c b/drivers/clk/renesas/r9a07g044-cpg.c
index 3c518b56c5a6..1e331cdb13a5 100644
--- a/drivers/clk/renesas/r9a07g044-cpg.c
+++ b/drivers/clk/renesas/r9a07g044-cpg.c
@@ -29,10 +29,14 @@ enum clk_ids {
CLK_PLL2_DIV16,
CLK_PLL2_DIV20,
CLK_PLL3,
+ CLK_PLL3_400,
+ CLK_PLL3_533,
CLK_PLL3_DIV2,
CLK_PLL3_DIV2_4,
CLK_PLL3_DIV2_4_2,
CLK_PLL3_DIV4,
+ CLK_SEL_PLL3_3,
+ CLK_DIV_PLL3_C,
CLK_PLL4,
CLK_PLL5,
CLK_PLL5_FOUT3,
@@ -56,6 +60,7 @@ static const struct clk_div_table dtable_1_32[] = {
};
/* Mux clock tables */
+static const char * const sel_pll3_3[] = { ".pll3_533", ".pll3_400" };
static const char * const sel_pll6_2[] = { ".pll6_250", ".pll5_250" };
static const struct cpg_core_clk r9a07g044_core_clks[] __initconst = {
@@ -68,6 +73,8 @@ static const struct cpg_core_clk r9a07g044_core_clks[] __initconst = {
DEF_SAMPLL(".pll1", CLK_PLL1, CLK_EXTAL, PLL146_CONF(0)),
DEF_FIXED(".pll2", CLK_PLL2, CLK_EXTAL, 133, 2),
DEF_FIXED(".pll3", CLK_PLL3, CLK_EXTAL, 133, 2),
+ DEF_FIXED(".pll3_400", CLK_PLL3_400, CLK_PLL3, 1, 4),
+ DEF_FIXED(".pll3_533", CLK_PLL3_533, CLK_PLL3, 1, 3),
DEF_FIXED(".pll5", CLK_PLL5, CLK_EXTAL, 125, 1),
DEF_FIXED(".pll5_fout3", CLK_PLL5_FOUT3, CLK_PLL5, 1, 6),
@@ -82,6 +89,10 @@ static const struct cpg_core_clk r9a07g044_core_clks[] __initconst = {
DEF_FIXED(".pll3_div2_4", CLK_PLL3_DIV2_4, CLK_PLL3_DIV2, 1, 4),
DEF_FIXED(".pll3_div2_4_2", CLK_PLL3_DIV2_4_2, CLK_PLL3_DIV2_4, 1, 2),
DEF_FIXED(".pll3_div4", CLK_PLL3_DIV4, CLK_PLL3, 1, 4),
+ DEF_MUX(".sel_pll3_3", CLK_SEL_PLL3_3, SEL_PLL3_3,
+ sel_pll3_3, ARRAY_SIZE(sel_pll3_3), 0, CLK_MUX_READ_ONLY),
+ DEF_DIV("divpl3c", CLK_DIV_PLL3_C, CLK_SEL_PLL3_3,
+ DIVPL3C, dtable_1_32, CLK_DIVIDER_HIWORD_MASK),
DEF_FIXED(".pll5_250", CLK_PLL5_250, CLK_PLL5_FOUT3, 1, 2),
DEF_FIXED(".pll6_250", CLK_PLL6_250, CLK_PLL6, 1, 2),
@@ -101,6 +112,8 @@ static const struct cpg_core_clk r9a07g044_core_clks[] __initconst = {
DEF_FIXED("ZT", R9A07G044_CLK_ZT, CLK_PLL3_DIV2_4_2, 1, 1),
DEF_MUX("HP", R9A07G044_CLK_HP, SEL_PLL6_2,
sel_pll6_2, ARRAY_SIZE(sel_pll6_2), 0, CLK_MUX_HIWORD_MASK),
+ DEF_FIXED("SPI0", R9A07G044_CLK_SPI0, CLK_DIV_PLL3_C, 1, 2),
+ DEF_FIXED("SPI1", R9A07G044_CLK_SPI1, CLK_DIV_PLL3_C, 1, 4),
};
static struct rzg2l_mod_clk r9a07g044_mod_clks[] = {
@@ -114,6 +127,10 @@ static struct rzg2l_mod_clk r9a07g044_mod_clks[] = {
0x52c, 0),
DEF_MOD("dmac_pclk", R9A07G044_DMAC_PCLK, CLK_P1_DIV2,
0x52c, 1),
+ DEF_MOD("spi_clk2", R9A07G044_SPI_CLK2, R9A07G044_CLK_SPI1,
+ 0x550, 0),
+ DEF_MOD("spi_clk", R9A07G044_SPI_CLK, R9A07G044_CLK_SPI0,
+ 0x550, 1),
DEF_MOD("ssi0_pclk", R9A07G044_SSI0_PCLK2, R9A07G044_CLK_P0,
0x570, 0),
DEF_MOD("ssi0_sfr", R9A07G044_SSI0_PCLK_SFR, R9A07G044_CLK_P0,
@@ -182,6 +199,7 @@ static struct rzg2l_reset r9a07g044_resets[] = {
DEF_RST(R9A07G044_IA55_RESETN, 0x818, 0),
DEF_RST(R9A07G044_DMAC_ARESETN, 0x82c, 0),
DEF_RST(R9A07G044_DMAC_RST_ASYNC, 0x82c, 1),
+ DEF_RST(R9A07G044_SPI_RST, 0x850, 0),
DEF_RST(R9A07G044_SSI0_RST_M2_REG, 0x870, 0),
DEF_RST(R9A07G044_SSI1_RST_M2_REG, 0x870, 1),
DEF_RST(R9A07G044_SSI2_RST_M2_REG, 0x870, 2),
diff --git a/drivers/clk/renesas/rzg2l-cpg.h b/drivers/clk/renesas/rzg2l-cpg.h
index 191c403aa52f..dc5b65a4029e 100644
--- a/drivers/clk/renesas/rzg2l-cpg.h
+++ b/drivers/clk/renesas/rzg2l-cpg.h
@@ -11,6 +11,7 @@
#define CPG_PL2_DDIV (0x204)
#define CPG_PL3A_DDIV (0x208)
+#define CPG_PL3_SSEL (0x408)
#define CPG_PL6_ETH_SSEL (0x418)
/* n = 0/1/2 for PLL1/4/6 */
@@ -24,10 +25,12 @@
#define DIVPL2A DDIV_PACK(CPG_PL2_DDIV, 0, 3)
#define DIVPL3A DDIV_PACK(CPG_PL3A_DDIV, 0, 3)
#define DIVPL3B DDIV_PACK(CPG_PL3A_DDIV, 4, 3)
+#define DIVPL3C DDIV_PACK(CPG_PL3A_DDIV, 8, 3)
#define SEL_PLL_PACK(offset, bitpos, size) \
(((offset) << 20) | ((bitpos) << 12) | ((size) << 8))
+#define SEL_PLL3_3 SEL_PLL_PACK(CPG_PL3_SSEL, 8, 1)
#define SEL_PLL6_2 SEL_PLL_PACK(CPG_PL6_ETH_SSEL, 0, 1)
/**
--
2.17.1
next reply other threads:[~2021-09-28 13:01 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-09-28 13:01 Lad Prabhakar [this message]
2021-10-05 14:19 ` [PATCH] clk: renesas: r9a07g044-cpg: Add clock and reset entries for SPI Multi I/O Bus Controller Geert Uytterhoeven
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210928130132.15022-1-prabhakar.mahadev-lad.rj@bp.renesas.com \
--to=prabhakar.mahadev-lad.rj@bp.renesas.com \
--cc=biju.das.jz@bp.renesas.com \
--cc=geert+renesas@glider.be \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=prabhakar.csengg@gmail.com \
--cc=sboyd@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.