[PATCH v3] soc: qcom: rpmhpd: Make power_on actually enable the domain

[Bjorn Andersson <bjorn.andersson@linaro.org>]

The general expectation is that powering on a power-domain should make
the power domain deliver some power, and if a specific performance state
is needed further requests has to be made.

But in contrast with other power-domain implementations (e.g. rpmpd) the
RPMh does not have an interface to enable the power, so the driver has
to vote for a particular corner (performance level) in rpmh_power_on().

But the corner is never initialized, so a typical request to simply
enable the power domain would not actually turn on the hardware. Further
more, when no more clients vote for a performance state (i.e. the
aggregated vote is 0) the power domain would be turned off.

Fix both of these issues by always voting for a corner with non-zero
value, when the power domain is enabled.

The tracking of the lowest non-zero corner is performed to handle the
corner case if there's ever a domain with a non-zero lowest corner, in
which case both rpmh_power_on() and rpmh_rpmhpd_set_performance_state()
would be allowed to use this lowest corner.

Fixes: 279b7e8a62cc ("soc: qcom: rpmhpd: Add RPMh power domain driver")
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---

Changes since v2:
- Fixed two spelling mistakes in the commit message
- Changed the last hunk to search for first non-zero level, rather than the
  first non-zero index (i.e. 1)

 drivers/soc/qcom/rpmhpd.c | 18 ++++++++++++++----
 1 file changed, 14 insertions(+), 4 deletions(-)

diff --git a/drivers/soc/qcom/rpmhpd.c b/drivers/soc/qcom/rpmhpd.c
index e280a8194725..0ca77ed22c6c 100644
--- a/drivers/soc/qcom/rpmhpd.c
+++ b/drivers/soc/qcom/rpmhpd.c
@@ -30,6 +30,7 @@
  * @active_only:	True if it represents an Active only peer
  * @corner:		current corner
  * @active_corner:	current active corner
+ * @enable_corner:	lowest non-zero corner
  * @level:		An array of level (vlvl) to corner (hlvl) mappings
  *			derived from cmd-db
  * @level_count:	Number of levels supported by the power domain. max
@@ -47,6 +48,7 @@ struct rpmhpd {
 	const bool	active_only;
 	unsigned int	corner;
 	unsigned int	active_corner;
+	unsigned int	enable_corner;
 	u32		level[RPMH_ARC_MAX_LEVELS];
 	size_t		level_count;
 	bool		enabled;
@@ -401,13 +403,13 @@ static int rpmhpd_aggregate_corner(struct rpmhpd *pd, unsigned int corner)
 static int rpmhpd_power_on(struct generic_pm_domain *domain)
 {
 	struct rpmhpd *pd = domain_to_rpmhpd(domain);
-	int ret = 0;
+	unsigned int corner;
+	int ret;
 
 	mutex_lock(&rpmhpd_lock);
 
-	if (pd->corner)
-		ret = rpmhpd_aggregate_corner(pd, pd->corner);
-
+	corner = max(pd->corner, pd->enable_corner);
+	ret = rpmhpd_aggregate_corner(pd, corner);
 	if (!ret)
 		pd->enabled = true;
 
@@ -452,6 +454,10 @@ static int rpmhpd_set_performance_state(struct generic_pm_domain *domain,
 		i--;
 
 	if (pd->enabled) {
+		/* Ensure that the domain isn't turn off */
+		if (i < pd->enable_corner)
+			i = pd->enable_corner;
+
 		ret = rpmhpd_aggregate_corner(pd, i);
 		if (ret)
 			goto out;
@@ -488,6 +494,10 @@ static int rpmhpd_update_level_mapping(struct rpmhpd *rpmhpd)
 	for (i = 0; i < rpmhpd->level_count; i++) {
 		rpmhpd->level[i] = buf[i];
 
+		/* Remember the first corner with non-zero level */
+		if (!rpmhpd->level[rpmhpd->enable_corner] && rpmhpd->level[i])
+			rpmhpd->enable_corner = i;
+
 		/*
 		 * The AUX data may be zero padded.  These 0 valued entries at
 		 * the end of the map must be ignored.
-- 
2.29.2