[PATCH 2/2] ASoC: qcom: sm8250: Add Jack support

[Srinivas Kandagatla <srinivas.kandagatla@linaro.org>]

WCD938X on SM8250 MTP is connected via TX macro which has MBHC support,
So add this jack support in the soundcard driver too.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
---
 sound/soc/qcom/sm8250.c | 61 +++++++++++++++++++++++++++++++++++++++++
 1 file changed, 61 insertions(+)

diff --git a/sound/soc/qcom/sm8250.c b/sound/soc/qcom/sm8250.c
index 9f2f0598a222..b2ca2579810b 100644
--- a/sound/soc/qcom/sm8250.c
+++ b/sound/soc/qcom/sm8250.c
@@ -8,6 +8,8 @@
 #include <sound/soc-dapm.h>
 #include <sound/pcm.h>
 #include <linux/soundwire/sdw.h>
+#include <sound/jack.h>
+#include <linux/input-event-codes.h>
 #include "qdsp6/q6afe.h"
 #include "common.h"
 
@@ -18,8 +20,66 @@ struct sm8250_snd_data {
 	bool stream_prepared[AFE_PORT_MAX];
 	struct snd_soc_card *card;
 	struct sdw_stream_runtime *sruntime[AFE_PORT_MAX];
+	struct snd_soc_jack jack;
+	bool jack_setup;
 };
 
+static int sm8250_snd_init(struct snd_soc_pcm_runtime *rtd)
+{
+	struct sm8250_snd_data *data = snd_soc_card_get_drvdata(rtd->card);
+	struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
+	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
+	struct snd_soc_card *card = rtd->card;
+	int rval, i;
+
+	if (!data->jack_setup) {
+		struct snd_jack *jack;
+
+		rval = snd_soc_card_jack_new(card, "Headset Jack",
+					     SND_JACK_HEADSET | SND_JACK_LINEOUT |
+					     SND_JACK_MECHANICAL |
+					     SND_JACK_BTN_0 | SND_JACK_BTN_1 |
+					     SND_JACK_BTN_2 | SND_JACK_BTN_3 |
+					     SND_JACK_BTN_4 | SND_JACK_BTN_5,
+					     &data->jack, NULL, 0);
+
+		if (rval < 0) {
+			dev_err(card->dev, "Unable to add Headphone Jack\n");
+			return rval;
+		}
+
+		jack = data->jack.jack;
+
+		snd_jack_set_key(jack, SND_JACK_BTN_0, KEY_MEDIA);
+		snd_jack_set_key(jack, SND_JACK_BTN_1, KEY_VOICECOMMAND);
+		snd_jack_set_key(jack, SND_JACK_BTN_2, KEY_VOLUMEUP);
+		snd_jack_set_key(jack, SND_JACK_BTN_3, KEY_VOLUMEDOWN);
+		data->jack_setup = true;
+	}
+
+	switch (cpu_dai->id) {
+	case TX_CODEC_DMA_TX_0:
+	case TX_CODEC_DMA_TX_1:
+	case TX_CODEC_DMA_TX_2:
+	case TX_CODEC_DMA_TX_3:
+		for_each_rtd_codec_dais(rtd, i, codec_dai) {
+			rval = snd_soc_component_set_jack(codec_dai->component,
+							  &data->jack, NULL);
+			if (rval != 0 && rval != -ENOTSUPP) {
+				dev_warn(card->dev, "Failed to set jack: %d\n", rval);
+				return rval;
+			}
+		}
+
+		break;
+	default:
+		break;
+	}
+
+
+	return 0;
+}
+
 static int sm8250_be_hw_params_fixup(struct snd_soc_pcm_runtime *rtd,
 				     struct snd_pcm_hw_params *params)
 {
@@ -192,6 +252,7 @@ static void sm8250_add_be_ops(struct snd_soc_card *card)
 
 	for_each_card_prelinks(card, i, link) {
 		if (link->no_pcm == 1) {
+			link->init = sm8250_snd_init;
 			link->be_hw_params_fixup = sm8250_be_hw_params_fixup;
 			link->ops = &sm8250_be_ops;
 		}
-- 
2.21.0