All of lore.kernel.org
 help / color / mirror / Atom feed
From: Sam Shih <sam.shih@mediatek.com>
To: Rob Herring <robh+dt@kernel.org>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	Michael Turquette <mturquette@baylibre.com>,
	Stephen Boyd <sboyd@kernel.org>,
	Fabien Parent <fparent@baylibre.com>,
	"Weiyi Lu" <weiyi.lu@mediatek.com>,
	Chun-Jie Chen <chun-jie.chen@mediatek.com>,
	Ikjoon Jang <ikjn@chromium.org>,
	Miles Chen <miles.chen@mediatek.com>,
	"Enric Balletbo i Serra" <enric.balletbo@collabora.com>,
	<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-mediatek@lists.infradead.org>, <linux-clk@vger.kernel.org>
Cc: John Crispin <john@phrozen.org>,
	Ryder Lee <Ryder.Lee@mediatek.com>,
	"Sam Shih" <sam.shih@mediatek.com>
Subject: [PATCH v4 5/5] arm64: dts: mediatek: add clock support for mt7986b
Date: Thu, 14 Oct 2021 15:56:20 +0800	[thread overview]
Message-ID: <20211014075620.17563-6-sam.shih@mediatek.com> (raw)
In-Reply-To: <20211014075620.17563-1-sam.shih@mediatek.com>

Add clock controller nodes, include 40M clock source, topckgen,
infracfg, apmixedsys and ethernet subsystem.

Signed-off-by: Sam Shih <sam.shih@mediatek.com>
---
 arch/arm64/boot/dts/mediatek/mt7986b.dtsi | 68 +++++++++++++++++++++--
 1 file changed, 63 insertions(+), 5 deletions(-)

diff --git a/arch/arm64/boot/dts/mediatek/mt7986b.dtsi b/arch/arm64/boot/dts/mediatek/mt7986b.dtsi
index 2b8e0a382398..9cc27020901a 100644
--- a/arch/arm64/boot/dts/mediatek/mt7986b.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7986b.dtsi
@@ -6,6 +6,7 @@
 
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/mt7986-clk.h>
 
 / {
 	compatible = "mediatek,mt7986b";
@@ -13,9 +14,10 @@ / {
 	#address-cells = <2>;
 	#size-cells = <2>;
 
-	system_clk: dummy40m {
+	clk40m: oscillator@0 {
 		compatible = "fixed-clock";
 		clock-frequency = <40000000>;
+		clock-output-names = "clkxtal";
 		#clock-cells = <0>;
 	};
 
@@ -99,6 +101,18 @@ gic: interrupt-controller@c000000 {
 			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
+		infracfg: infracfg@10001000 {
+			compatible = "mediatek,mt7986-infracfg", "syscon";
+			reg = <0 0x10001000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		topckgen: topckgen@1001b000 {
+			compatible = "mediatek,mt7986-topckgen", "syscon";
+			reg = <0 0x1001B000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
 		watchdog: watchdog@1001c000 {
 			compatible = "mediatek,mt7986-wdt",
 				     "mediatek,mt6589-wdt";
@@ -108,11 +122,31 @@ watchdog: watchdog@1001c000 {
 			status = "disabled";
 		};
 
+		apmixedsys: apmixedsys@1001e000 {
+			compatible = "mediatek,mt7986-apmixedsys";
+			reg = <0 0x1001E000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		sgmiisys0: syscon@10060000 {
+			compatible = "mediatek,mt7986-sgmiisys_0",
+				     "syscon";
+			reg = <0 0x10060000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		sgmiisys1: syscon@10070000 {
+			compatible = "mediatek,mt7986-sgmiisys_1",
+				     "syscon";
+			reg = <0 0x10070000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
 		trng: trng@1020f000 {
 			compatible = "mediatek,mt7986-rng",
 				     "mediatek,mt7623-rng";
 			reg = <0 0x1020f000 0 0x100>;
-			clocks = <&system_clk>;
+			clocks = <&infracfg CLK_INFRA_TRNG_CK>;
 			clock-names = "rng";
 			status = "disabled";
 		};
@@ -122,7 +156,13 @@ uart0: serial@11002000 {
 				     "mediatek,mt6577-uart";
 			reg = <0 0x11002000 0 0x400>;
 			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&system_clk>;
+			clocks = <&infracfg CLK_INFRA_UART0_SEL>,
+				 <&infracfg CLK_INFRA_UART0_CK>;
+			clock-names = "baud", "bus";
+			assigned-clocks = <&topckgen CLK_TOP_UART_SEL>,
+					  <&infracfg CLK_INFRA_UART0_SEL>;
+			assigned-clock-parents = <&topckgen CLK_TOP_XTAL>,
+						 <&topckgen CLK_TOP_UART_SEL>;
 			status = "disabled";
 		};
 
@@ -131,7 +171,11 @@ uart1: serial@11003000 {
 				     "mediatek,mt6577-uart";
 			reg = <0 0x11003000 0 0x400>;
 			interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&system_clk>;
+			clocks = <&infracfg CLK_INFRA_UART1_SEL>,
+				 <&infracfg CLK_INFRA_UART1_CK>;
+			clock-names = "baud", "bus";
+			assigned-clocks = <&infracfg CLK_INFRA_UART1_SEL>;
+			assigned-clock-parents = <&topckgen CLK_TOP_F26M_SEL>;
 			status = "disabled";
 		};
 
@@ -140,10 +184,24 @@ uart2: serial@11004000 {
 				     "mediatek,mt6577-uart";
 			reg = <0 0x11004000 0 0x400>;
 			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&system_clk>;
+			clocks = <&infracfg CLK_INFRA_UART2_SEL>,
+				 <&infracfg CLK_INFRA_UART2_CK>;
+			clock-names = "baud", "bus";
+			assigned-clocks = <&infracfg CLK_INFRA_UART2_SEL>;
+			assigned-clock-parents = <&topckgen CLK_TOP_F26M_SEL>;
 			status = "disabled";
 		};
 
+		ethsys: syscon@15000000 {
+			 #address-cells = <1>;
+			 #size-cells = <1>;
+			 compatible = "mediatek,mt7986-ethsys",
+				      "syscon";
+			 reg = <0 0x15000000 0 0x1000>;
+			 #clock-cells = <1>;
+			 #reset-cells = <1>;
+		};
+
 	};
 
 };
-- 
2.29.2


WARNING: multiple messages have this Message-ID (diff)
From: Sam Shih <sam.shih@mediatek.com>
To: Rob Herring <robh+dt@kernel.org>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	Michael Turquette <mturquette@baylibre.com>,
	Stephen Boyd <sboyd@kernel.org>,
	Fabien Parent <fparent@baylibre.com>,
	"Weiyi Lu" <weiyi.lu@mediatek.com>,
	Chun-Jie Chen <chun-jie.chen@mediatek.com>,
	Ikjoon Jang <ikjn@chromium.org>,
	Miles Chen <miles.chen@mediatek.com>,
	"Enric Balletbo i Serra" <enric.balletbo@collabora.com>,
	<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-mediatek@lists.infradead.org>,
	 <linux-clk@vger.kernel.org>
Cc: John Crispin <john@phrozen.org>,
	Ryder Lee <Ryder.Lee@mediatek.com>,
	"Sam Shih" <sam.shih@mediatek.com>
Subject: [PATCH v4 5/5] arm64: dts: mediatek: add clock support for mt7986b
Date: Thu, 14 Oct 2021 15:56:20 +0800	[thread overview]
Message-ID: <20211014075620.17563-6-sam.shih@mediatek.com> (raw)
In-Reply-To: <20211014075620.17563-1-sam.shih@mediatek.com>

Add clock controller nodes, include 40M clock source, topckgen,
infracfg, apmixedsys and ethernet subsystem.

Signed-off-by: Sam Shih <sam.shih@mediatek.com>
---
 arch/arm64/boot/dts/mediatek/mt7986b.dtsi | 68 +++++++++++++++++++++--
 1 file changed, 63 insertions(+), 5 deletions(-)

diff --git a/arch/arm64/boot/dts/mediatek/mt7986b.dtsi b/arch/arm64/boot/dts/mediatek/mt7986b.dtsi
index 2b8e0a382398..9cc27020901a 100644
--- a/arch/arm64/boot/dts/mediatek/mt7986b.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7986b.dtsi
@@ -6,6 +6,7 @@
 
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/mt7986-clk.h>
 
 / {
 	compatible = "mediatek,mt7986b";
@@ -13,9 +14,10 @@ / {
 	#address-cells = <2>;
 	#size-cells = <2>;
 
-	system_clk: dummy40m {
+	clk40m: oscillator@0 {
 		compatible = "fixed-clock";
 		clock-frequency = <40000000>;
+		clock-output-names = "clkxtal";
 		#clock-cells = <0>;
 	};
 
@@ -99,6 +101,18 @@ gic: interrupt-controller@c000000 {
 			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
+		infracfg: infracfg@10001000 {
+			compatible = "mediatek,mt7986-infracfg", "syscon";
+			reg = <0 0x10001000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		topckgen: topckgen@1001b000 {
+			compatible = "mediatek,mt7986-topckgen", "syscon";
+			reg = <0 0x1001B000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
 		watchdog: watchdog@1001c000 {
 			compatible = "mediatek,mt7986-wdt",
 				     "mediatek,mt6589-wdt";
@@ -108,11 +122,31 @@ watchdog: watchdog@1001c000 {
 			status = "disabled";
 		};
 
+		apmixedsys: apmixedsys@1001e000 {
+			compatible = "mediatek,mt7986-apmixedsys";
+			reg = <0 0x1001E000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		sgmiisys0: syscon@10060000 {
+			compatible = "mediatek,mt7986-sgmiisys_0",
+				     "syscon";
+			reg = <0 0x10060000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		sgmiisys1: syscon@10070000 {
+			compatible = "mediatek,mt7986-sgmiisys_1",
+				     "syscon";
+			reg = <0 0x10070000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
 		trng: trng@1020f000 {
 			compatible = "mediatek,mt7986-rng",
 				     "mediatek,mt7623-rng";
 			reg = <0 0x1020f000 0 0x100>;
-			clocks = <&system_clk>;
+			clocks = <&infracfg CLK_INFRA_TRNG_CK>;
 			clock-names = "rng";
 			status = "disabled";
 		};
@@ -122,7 +156,13 @@ uart0: serial@11002000 {
 				     "mediatek,mt6577-uart";
 			reg = <0 0x11002000 0 0x400>;
 			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&system_clk>;
+			clocks = <&infracfg CLK_INFRA_UART0_SEL>,
+				 <&infracfg CLK_INFRA_UART0_CK>;
+			clock-names = "baud", "bus";
+			assigned-clocks = <&topckgen CLK_TOP_UART_SEL>,
+					  <&infracfg CLK_INFRA_UART0_SEL>;
+			assigned-clock-parents = <&topckgen CLK_TOP_XTAL>,
+						 <&topckgen CLK_TOP_UART_SEL>;
 			status = "disabled";
 		};
 
@@ -131,7 +171,11 @@ uart1: serial@11003000 {
 				     "mediatek,mt6577-uart";
 			reg = <0 0x11003000 0 0x400>;
 			interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&system_clk>;
+			clocks = <&infracfg CLK_INFRA_UART1_SEL>,
+				 <&infracfg CLK_INFRA_UART1_CK>;
+			clock-names = "baud", "bus";
+			assigned-clocks = <&infracfg CLK_INFRA_UART1_SEL>;
+			assigned-clock-parents = <&topckgen CLK_TOP_F26M_SEL>;
 			status = "disabled";
 		};
 
@@ -140,10 +184,24 @@ uart2: serial@11004000 {
 				     "mediatek,mt6577-uart";
 			reg = <0 0x11004000 0 0x400>;
 			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&system_clk>;
+			clocks = <&infracfg CLK_INFRA_UART2_SEL>,
+				 <&infracfg CLK_INFRA_UART2_CK>;
+			clock-names = "baud", "bus";
+			assigned-clocks = <&infracfg CLK_INFRA_UART2_SEL>;
+			assigned-clock-parents = <&topckgen CLK_TOP_F26M_SEL>;
 			status = "disabled";
 		};
 
+		ethsys: syscon@15000000 {
+			 #address-cells = <1>;
+			 #size-cells = <1>;
+			 compatible = "mediatek,mt7986-ethsys",
+				      "syscon";
+			 reg = <0 0x15000000 0 0x1000>;
+			 #clock-cells = <1>;
+			 #reset-cells = <1>;
+		};
+
 	};
 
 };
-- 
2.29.2


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

WARNING: multiple messages have this Message-ID (diff)
From: Sam Shih <sam.shih@mediatek.com>
To: Rob Herring <robh+dt@kernel.org>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	Michael Turquette <mturquette@baylibre.com>,
	Stephen Boyd <sboyd@kernel.org>,
	Fabien Parent <fparent@baylibre.com>,
	"Weiyi Lu" <weiyi.lu@mediatek.com>,
	Chun-Jie Chen <chun-jie.chen@mediatek.com>,
	Ikjoon Jang <ikjn@chromium.org>,
	Miles Chen <miles.chen@mediatek.com>,
	"Enric Balletbo i Serra" <enric.balletbo@collabora.com>,
	<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-mediatek@lists.infradead.org>,
	 <linux-clk@vger.kernel.org>
Cc: John Crispin <john@phrozen.org>,
	Ryder Lee <Ryder.Lee@mediatek.com>,
	"Sam Shih" <sam.shih@mediatek.com>
Subject: [PATCH v4 5/5] arm64: dts: mediatek: add clock support for mt7986b
Date: Thu, 14 Oct 2021 15:56:20 +0800	[thread overview]
Message-ID: <20211014075620.17563-6-sam.shih@mediatek.com> (raw)
In-Reply-To: <20211014075620.17563-1-sam.shih@mediatek.com>

Add clock controller nodes, include 40M clock source, topckgen,
infracfg, apmixedsys and ethernet subsystem.

Signed-off-by: Sam Shih <sam.shih@mediatek.com>
---
 arch/arm64/boot/dts/mediatek/mt7986b.dtsi | 68 +++++++++++++++++++++--
 1 file changed, 63 insertions(+), 5 deletions(-)

diff --git a/arch/arm64/boot/dts/mediatek/mt7986b.dtsi b/arch/arm64/boot/dts/mediatek/mt7986b.dtsi
index 2b8e0a382398..9cc27020901a 100644
--- a/arch/arm64/boot/dts/mediatek/mt7986b.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7986b.dtsi
@@ -6,6 +6,7 @@
 
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/mt7986-clk.h>
 
 / {
 	compatible = "mediatek,mt7986b";
@@ -13,9 +14,10 @@ / {
 	#address-cells = <2>;
 	#size-cells = <2>;
 
-	system_clk: dummy40m {
+	clk40m: oscillator@0 {
 		compatible = "fixed-clock";
 		clock-frequency = <40000000>;
+		clock-output-names = "clkxtal";
 		#clock-cells = <0>;
 	};
 
@@ -99,6 +101,18 @@ gic: interrupt-controller@c000000 {
 			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
+		infracfg: infracfg@10001000 {
+			compatible = "mediatek,mt7986-infracfg", "syscon";
+			reg = <0 0x10001000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		topckgen: topckgen@1001b000 {
+			compatible = "mediatek,mt7986-topckgen", "syscon";
+			reg = <0 0x1001B000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
 		watchdog: watchdog@1001c000 {
 			compatible = "mediatek,mt7986-wdt",
 				     "mediatek,mt6589-wdt";
@@ -108,11 +122,31 @@ watchdog: watchdog@1001c000 {
 			status = "disabled";
 		};
 
+		apmixedsys: apmixedsys@1001e000 {
+			compatible = "mediatek,mt7986-apmixedsys";
+			reg = <0 0x1001E000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		sgmiisys0: syscon@10060000 {
+			compatible = "mediatek,mt7986-sgmiisys_0",
+				     "syscon";
+			reg = <0 0x10060000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		sgmiisys1: syscon@10070000 {
+			compatible = "mediatek,mt7986-sgmiisys_1",
+				     "syscon";
+			reg = <0 0x10070000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
 		trng: trng@1020f000 {
 			compatible = "mediatek,mt7986-rng",
 				     "mediatek,mt7623-rng";
 			reg = <0 0x1020f000 0 0x100>;
-			clocks = <&system_clk>;
+			clocks = <&infracfg CLK_INFRA_TRNG_CK>;
 			clock-names = "rng";
 			status = "disabled";
 		};
@@ -122,7 +156,13 @@ uart0: serial@11002000 {
 				     "mediatek,mt6577-uart";
 			reg = <0 0x11002000 0 0x400>;
 			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&system_clk>;
+			clocks = <&infracfg CLK_INFRA_UART0_SEL>,
+				 <&infracfg CLK_INFRA_UART0_CK>;
+			clock-names = "baud", "bus";
+			assigned-clocks = <&topckgen CLK_TOP_UART_SEL>,
+					  <&infracfg CLK_INFRA_UART0_SEL>;
+			assigned-clock-parents = <&topckgen CLK_TOP_XTAL>,
+						 <&topckgen CLK_TOP_UART_SEL>;
 			status = "disabled";
 		};
 
@@ -131,7 +171,11 @@ uart1: serial@11003000 {
 				     "mediatek,mt6577-uart";
 			reg = <0 0x11003000 0 0x400>;
 			interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&system_clk>;
+			clocks = <&infracfg CLK_INFRA_UART1_SEL>,
+				 <&infracfg CLK_INFRA_UART1_CK>;
+			clock-names = "baud", "bus";
+			assigned-clocks = <&infracfg CLK_INFRA_UART1_SEL>;
+			assigned-clock-parents = <&topckgen CLK_TOP_F26M_SEL>;
 			status = "disabled";
 		};
 
@@ -140,10 +184,24 @@ uart2: serial@11004000 {
 				     "mediatek,mt6577-uart";
 			reg = <0 0x11004000 0 0x400>;
 			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&system_clk>;
+			clocks = <&infracfg CLK_INFRA_UART2_SEL>,
+				 <&infracfg CLK_INFRA_UART2_CK>;
+			clock-names = "baud", "bus";
+			assigned-clocks = <&infracfg CLK_INFRA_UART2_SEL>;
+			assigned-clock-parents = <&topckgen CLK_TOP_F26M_SEL>;
 			status = "disabled";
 		};
 
+		ethsys: syscon@15000000 {
+			 #address-cells = <1>;
+			 #size-cells = <1>;
+			 compatible = "mediatek,mt7986-ethsys",
+				      "syscon";
+			 reg = <0 0x15000000 0 0x1000>;
+			 #clock-cells = <1>;
+			 #reset-cells = <1>;
+		};
+
 	};
 
 };
-- 
2.29.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2021-10-14  7:56 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-10-14  7:56 [PATCH v4 0/5] Mediatek MT7986 basic clock support Sam Shih
2021-10-14  7:56 ` Sam Shih
2021-10-14  7:56 ` Sam Shih
2021-10-14  7:56 ` [PATCH v4 1/5] dt-bindings: clock: mediatek: document clk bindings for mediatek mt7986 SoC Sam Shih
2021-10-14  7:56   ` Sam Shih
2021-10-14  7:56   ` Sam Shih
2021-10-14  7:56 ` [PATCH v4 2/5] clk: mediatek: add mt7986 clock IDs Sam Shih
2021-10-14  7:56   ` Sam Shih
2021-10-14  7:56   ` Sam Shih
2021-10-14  7:56 ` [PATCH v4 3/5] clk: mediatek: add mt7986 clock support Sam Shih
2021-10-14  7:56   ` Sam Shih
2021-10-14  7:56   ` Sam Shih
2021-10-14 15:47   ` Matthias Brugger
2021-10-14 15:47     ` Matthias Brugger
2021-10-14 15:47     ` Matthias Brugger
2021-10-14  7:56 ` [PATCH v4 4/5] arm64: dts: mediatek: add clock support for mt7986a Sam Shih
2021-10-14  7:56   ` Sam Shih
2021-10-14  7:56   ` Sam Shih
2021-10-14  7:56 ` Sam Shih [this message]
2021-10-14  7:56   ` [PATCH v4 5/5] arm64: dts: mediatek: add clock support for mt7986b Sam Shih
2021-10-14  7:56   ` Sam Shih

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20211014075620.17563-6-sam.shih@mediatek.com \
    --to=sam.shih@mediatek.com \
    --cc=Ryder.Lee@mediatek.com \
    --cc=chun-jie.chen@mediatek.com \
    --cc=devicetree@vger.kernel.org \
    --cc=enric.balletbo@collabora.com \
    --cc=fparent@baylibre.com \
    --cc=ikjn@chromium.org \
    --cc=john@phrozen.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=matthias.bgg@gmail.com \
    --cc=miles.chen@mediatek.com \
    --cc=mturquette@baylibre.com \
    --cc=robh+dt@kernel.org \
    --cc=sboyd@kernel.org \
    --cc=weiyi.lu@mediatek.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.