From: Alistair Francis <alistair@alistair23.me>
To: lee.jones@linaro.org, robh+dt@kernel.org, lgirdwood@gmail.com,
broonie@kernel.org, kernel@pengutronix.de
Cc: shawnguo@kernel.org, s.hauer@pengutronix.de, linux-imx@nxp.com,
amitk@kernel.org, rui.zhang@intel.com,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
alistair23@gmail.com, linux-hwmon@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, linux-pm@vger.kernel.org,
Alistair Francis <alistair@alistair23.me>
Subject: [PATCH v13 9/9] ARM: dts: imx7d: remarkable2: Enable lcdif
Date: Fri, 15 Oct 2021 22:25:51 +1000 [thread overview]
Message-ID: <20211015122551.38951-10-alistair@alistair23.me> (raw)
In-Reply-To: <20211015122551.38951-1-alistair@alistair23.me>
Connect the dispaly on the reMarkable2.
Signed-off-by: Alistair Francis <alistair@alistair23.me>
---
| 74 +++++++++++++++++++++++++
1 file changed, 74 insertions(+)
--git a/arch/arm/boot/dts/imx7d-remarkable2.dts b/arch/arm/boot/dts/imx7d-remarkable2.dts
index b66d28b30d75..fe68f6eaa2ec 100644
--- a/arch/arm/boot/dts/imx7d-remarkable2.dts
+++ b/arch/arm/boot/dts/imx7d-remarkable2.dts
@@ -55,6 +55,16 @@ reg_brcm: regulator-brcm {
startup-delay-us = <150>;
};
+ reg_sdoe: regulator-sdoe {
+ compatible = "regulator-fixed";
+ regulator-name = "SDOE";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&pinctrl_sdoe_reg>;
+ pinctrl-1 = <&pinctrl_sdoe_reg>;
+ gpio = <&gpio3 27 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
wifi_pwrseq: wifi_pwrseq {
compatible = "mmc-pwrseq-simple";
pinctrl-names = "default";
@@ -63,6 +73,16 @@ wifi_pwrseq: wifi_pwrseq {
clocks = <&clks IMX7D_CLKO2_ROOT_DIV>;
clock-names = "ext_clock";
};
+
+ panel {
+ compatible = "eink,vb3300-kca";
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&display_out>;
+ };
+ };
+ };
};
&clks {
@@ -99,6 +119,20 @@ reg_epdpmic: vcom {
};
};
+&lcdif {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lcdif>;
+ lcd-supply = <®_epdpmic>;
+ lcd2-supply = <®_sdoe>;
+ status = "okay";
+
+ port {
+ display_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
+};
+
&snvs_pwrkey {
status = "okay";
};
@@ -187,6 +221,46 @@ MX7D_PAD_I2C4_SCL__I2C4_SCL 0x4000007f
>;
};
+ pinctrl_lcdif: lcdifgrp {
+ fsl,pins = <
+ MX7D_PAD_LCD_DATA00__LCD_DATA0 0x79
+ MX7D_PAD_LCD_DATA01__LCD_DATA1 0x79
+ MX7D_PAD_LCD_DATA02__LCD_DATA2 0x79
+ MX7D_PAD_LCD_DATA03__LCD_DATA3 0x79
+ MX7D_PAD_LCD_DATA04__LCD_DATA4 0x79
+ MX7D_PAD_LCD_DATA05__LCD_DATA5 0x79
+ MX7D_PAD_LCD_DATA06__LCD_DATA6 0x79
+ MX7D_PAD_LCD_DATA07__LCD_DATA7 0x79
+ MX7D_PAD_LCD_DATA08__LCD_DATA8 0x79
+ MX7D_PAD_LCD_DATA09__LCD_DATA9 0x79
+ MX7D_PAD_LCD_DATA10__LCD_DATA10 0x79
+ MX7D_PAD_LCD_DATA11__LCD_DATA11 0x79
+ MX7D_PAD_LCD_DATA12__LCD_DATA12 0x79
+ MX7D_PAD_LCD_DATA13__LCD_DATA13 0x79
+ MX7D_PAD_LCD_DATA14__LCD_DATA14 0x79
+ MX7D_PAD_LCD_DATA15__LCD_DATA15 0x79
+
+ MX7D_PAD_LCD_DATA17__LCD_DATA17 0x79
+ MX7D_PAD_LCD_DATA18__LCD_DATA18 0x79
+ MX7D_PAD_LCD_DATA19__LCD_DATA19 0x79
+ MX7D_PAD_LCD_DATA20__LCD_DATA20 0x79
+ MX7D_PAD_LCD_DATA21__LCD_DATA21 0x79
+
+ MX7D_PAD_LCD_DATA23__LCD_DATA23 0x79
+ MX7D_PAD_LCD_CLK__LCD_CLK 0x79
+ MX7D_PAD_LCD_ENABLE__LCD_ENABLE 0x79
+ MX7D_PAD_LCD_VSYNC__LCD_VSYNC 0x79
+ MX7D_PAD_LCD_HSYNC__LCD_HSYNC 0x79
+ MX7D_PAD_LCD_RESET__LCD_RESET 0x79
+ >;
+ };
+
+ pinctrl_sdoe_reg: sdoereggrp {
+ fsl,pins = <
+ MX7D_PAD_LCD_DATA22__GPIO3_IO27 0x74
+ >;
+ };
+
pinctrl_uart1: uart1grp {
fsl,pins = <
MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX 0x79
--
2.31.1
WARNING: multiple messages have this Message-ID (diff)
From: Alistair Francis <alistair@alistair23.me>
To: lee.jones@linaro.org, robh+dt@kernel.org, lgirdwood@gmail.com,
broonie@kernel.org, kernel@pengutronix.de
Cc: shawnguo@kernel.org, s.hauer@pengutronix.de, linux-imx@nxp.com,
amitk@kernel.org, rui.zhang@intel.com,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
alistair23@gmail.com, linux-hwmon@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, linux-pm@vger.kernel.org,
Alistair Francis <alistair@alistair23.me>
Subject: [PATCH v13 9/9] ARM: dts: imx7d: remarkable2: Enable lcdif
Date: Fri, 15 Oct 2021 22:25:51 +1000 [thread overview]
Message-ID: <20211015122551.38951-10-alistair@alistair23.me> (raw)
In-Reply-To: <20211015122551.38951-1-alistair@alistair23.me>
Connect the dispaly on the reMarkable2.
Signed-off-by: Alistair Francis <alistair@alistair23.me>
---
| 74 +++++++++++++++++++++++++
1 file changed, 74 insertions(+)
--git a/arch/arm/boot/dts/imx7d-remarkable2.dts b/arch/arm/boot/dts/imx7d-remarkable2.dts
index b66d28b30d75..fe68f6eaa2ec 100644
--- a/arch/arm/boot/dts/imx7d-remarkable2.dts
+++ b/arch/arm/boot/dts/imx7d-remarkable2.dts
@@ -55,6 +55,16 @@ reg_brcm: regulator-brcm {
startup-delay-us = <150>;
};
+ reg_sdoe: regulator-sdoe {
+ compatible = "regulator-fixed";
+ regulator-name = "SDOE";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&pinctrl_sdoe_reg>;
+ pinctrl-1 = <&pinctrl_sdoe_reg>;
+ gpio = <&gpio3 27 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
wifi_pwrseq: wifi_pwrseq {
compatible = "mmc-pwrseq-simple";
pinctrl-names = "default";
@@ -63,6 +73,16 @@ wifi_pwrseq: wifi_pwrseq {
clocks = <&clks IMX7D_CLKO2_ROOT_DIV>;
clock-names = "ext_clock";
};
+
+ panel {
+ compatible = "eink,vb3300-kca";
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&display_out>;
+ };
+ };
+ };
};
&clks {
@@ -99,6 +119,20 @@ reg_epdpmic: vcom {
};
};
+&lcdif {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lcdif>;
+ lcd-supply = <®_epdpmic>;
+ lcd2-supply = <®_sdoe>;
+ status = "okay";
+
+ port {
+ display_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
+};
+
&snvs_pwrkey {
status = "okay";
};
@@ -187,6 +221,46 @@ MX7D_PAD_I2C4_SCL__I2C4_SCL 0x4000007f
>;
};
+ pinctrl_lcdif: lcdifgrp {
+ fsl,pins = <
+ MX7D_PAD_LCD_DATA00__LCD_DATA0 0x79
+ MX7D_PAD_LCD_DATA01__LCD_DATA1 0x79
+ MX7D_PAD_LCD_DATA02__LCD_DATA2 0x79
+ MX7D_PAD_LCD_DATA03__LCD_DATA3 0x79
+ MX7D_PAD_LCD_DATA04__LCD_DATA4 0x79
+ MX7D_PAD_LCD_DATA05__LCD_DATA5 0x79
+ MX7D_PAD_LCD_DATA06__LCD_DATA6 0x79
+ MX7D_PAD_LCD_DATA07__LCD_DATA7 0x79
+ MX7D_PAD_LCD_DATA08__LCD_DATA8 0x79
+ MX7D_PAD_LCD_DATA09__LCD_DATA9 0x79
+ MX7D_PAD_LCD_DATA10__LCD_DATA10 0x79
+ MX7D_PAD_LCD_DATA11__LCD_DATA11 0x79
+ MX7D_PAD_LCD_DATA12__LCD_DATA12 0x79
+ MX7D_PAD_LCD_DATA13__LCD_DATA13 0x79
+ MX7D_PAD_LCD_DATA14__LCD_DATA14 0x79
+ MX7D_PAD_LCD_DATA15__LCD_DATA15 0x79
+
+ MX7D_PAD_LCD_DATA17__LCD_DATA17 0x79
+ MX7D_PAD_LCD_DATA18__LCD_DATA18 0x79
+ MX7D_PAD_LCD_DATA19__LCD_DATA19 0x79
+ MX7D_PAD_LCD_DATA20__LCD_DATA20 0x79
+ MX7D_PAD_LCD_DATA21__LCD_DATA21 0x79
+
+ MX7D_PAD_LCD_DATA23__LCD_DATA23 0x79
+ MX7D_PAD_LCD_CLK__LCD_CLK 0x79
+ MX7D_PAD_LCD_ENABLE__LCD_ENABLE 0x79
+ MX7D_PAD_LCD_VSYNC__LCD_VSYNC 0x79
+ MX7D_PAD_LCD_HSYNC__LCD_HSYNC 0x79
+ MX7D_PAD_LCD_RESET__LCD_RESET 0x79
+ >;
+ };
+
+ pinctrl_sdoe_reg: sdoereggrp {
+ fsl,pins = <
+ MX7D_PAD_LCD_DATA22__GPIO3_IO27 0x74
+ >;
+ };
+
pinctrl_uart1: uart1grp {
fsl,pins = <
MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX 0x79
--
2.31.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2021-10-15 12:27 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-10-15 12:25 [PATCH v13 0/9] Add support for the silergy,sy7636a Alistair Francis
2021-10-15 12:25 ` Alistair Francis
2021-10-15 12:25 ` [PATCH v13 1/9] dt-bindings: mfd: Initial commit of silergy,sy7636a.yaml Alistair Francis
2021-10-15 12:25 ` [PATCH v13 1/9] dt-bindings: mfd: Initial commit of silergy, sy7636a.yaml Alistair Francis
2021-10-22 10:30 ` [PATCH v13 1/9] dt-bindings: mfd: Initial commit of silergy,sy7636a.yaml Lee Jones
2021-10-22 10:30 ` Lee Jones
2021-10-15 12:25 ` [PATCH v13 2/9] mfd: simple-mfd-i2c: Add a Kconfig name Alistair Francis
2021-10-15 12:25 ` Alistair Francis
2021-10-22 10:30 ` Lee Jones
2021-10-22 10:30 ` Lee Jones
2021-10-15 12:25 ` [PATCH v13 3/9] mfd: simple-mfd-i2c: Enable support for the silergy,sy7636a Alistair Francis
2021-10-15 12:25 ` [PATCH v13 3/9] mfd: simple-mfd-i2c: Enable support for the silergy, sy7636a Alistair Francis
2021-10-21 11:27 ` [PATCH v13 3/9] mfd: simple-mfd-i2c: Enable support for the silergy,sy7636a Lee Jones
2021-10-21 11:27 ` Lee Jones
2021-10-15 12:25 ` [PATCH v13 4/9] regulator: sy7636a: Remove requirement on sy7636a mfd Alistair Francis
2021-10-15 12:25 ` Alistair Francis
2021-10-15 12:25 ` [PATCH v13 5/9] thermal: sy7636a: Add thermal driver for sy7636a Alistair Francis
2021-10-15 12:25 ` Alistair Francis
2021-10-16 10:32 ` Daniel Lezcano
2021-10-16 10:32 ` Daniel Lezcano
2021-10-15 12:25 ` [PATCH v13 6/9] hwmon: sy7636a: Add temperature " Alistair Francis
2021-10-15 12:25 ` Alistair Francis
2021-10-15 14:12 ` Guenter Roeck
2021-10-15 14:12 ` Guenter Roeck
2021-10-15 12:25 ` [PATCH v13 7/9] ARM: imx_v6_v7_defconfig: Enable silergy,sy7636a Alistair Francis
2021-10-15 12:25 ` Alistair Francis
2021-10-15 12:25 ` [PATCH v13 8/9] ARM: dts: imx7d: remarkable2: " Alistair Francis
2021-10-15 12:25 ` Alistair Francis
2021-10-15 12:25 ` Alistair Francis [this message]
2021-10-15 12:25 ` [PATCH v13 9/9] ARM: dts: imx7d: remarkable2: Enable lcdif Alistair Francis
2021-10-22 0:52 ` (subset) [PATCH v13 0/9] Add support for the silergy,sy7636a Mark Brown
2021-10-22 0:52 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211015122551.38951-10-alistair@alistair23.me \
--to=alistair@alistair23.me \
--cc=alistair23@gmail.com \
--cc=amitk@kernel.org \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=kernel@pengutronix.de \
--cc=lee.jones@linaro.org \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=rui.zhang@intel.com \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.