All of lore.kernel.org
 help / color / mirror / Atom feed
From: Sourabh Jain <sourabhjain@linux.ibm.com>
To: linuxppc-dev@ozlabs.org
Cc: Mahesh Salgaonkar <mahesh@linux.ibm.com>,
	mahesh@linux.vnet.ibm.com,
	Abdul haleem <abdhalee@linux.vnet.ibm.com>,
	aneesh.kumar@linux.ibm.com, hbathini@linux.ibm.com
Subject: [RESEND PATCH v2 1/3] fixup mmu_features immediately after getting cpu pa features.
Date: Mon, 18 Oct 2021 14:14:32 +0530	[thread overview]
Message-ID: <20211018084434.217772-2-sourabhjain@linux.ibm.com> (raw)
In-Reply-To: <20211018084434.217772-1-sourabhjain@linux.ibm.com>

From: Mahesh Salgaonkar <mahesh@linux.ibm.com>

On system with radix support available, early_radix_enabled() starts
returning true for a small window (until mmu_early_init_devtree() is
called) even when radix mode disabled on kernel command line. This causes
ppc64_bolted_size() to return ULONG_MAX in HPT mode instead of supported
segment size, during boot cpu paca allocation.

Withi kernel command line = "... disable_radix":

early_init_devtree:			  <- early_radix_enabled() = false
  early_init_dt_scan_cpus:		  <- early_radix_enabled() = false
      ...
      check_cpu_pa_features:		  <- early_radix_enabled() = false
      ...				^ <- early_radix_enabled() = TRUE
      allocate_paca:			| <- early_radix_enabled() = TRUE
          ...                           |
          ppc64_bolted_size:		| <- early_radix_enabled() = TRUE
              if (early_radix_enabled())| <- early_radix_enabled() = TRUE
                  return ULONG_MAX;     |
      ...                               |
  ...					| <- early_radix_enabled() = TRUE
  ...					| <- early_radix_enabled() = TRUE
  mmu_early_init_devtree()              V
  ...					  <- early_radix_enabled() = false

So far we have not seen any issue because allocate_paca() takes minimum of
ppc64_bolted_size and rma_size while allocating paca. However it is better
to close this window by fixing up the mmu features as early as possible.
This fixes early_radix_enabled() and ppc64_bolted_size() to return valid
values in radix disable mode. This patch will help subsequent patch to
depend on early_radix_enabled() check while detecting supported segment
size in HPT mode.

Signed-off-by: Mahesh Salgaonkar <mahesh@linux.ibm.com>
Signed-off-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Reported-and-tested-by: Abdul haleem <abdhalee@linux.vnet.ibm.com>
---
 arch/powerpc/include/asm/book3s/64/mmu.h | 1 +
 arch/powerpc/include/asm/mmu.h           | 1 +
 arch/powerpc/kernel/prom.c               | 2 ++
 arch/powerpc/mm/init_64.c                | 5 ++++-
 4 files changed, 8 insertions(+), 1 deletion(-)

diff --git a/arch/powerpc/include/asm/book3s/64/mmu.h b/arch/powerpc/include/asm/book3s/64/mmu.h
index c02f42d1031e..d60be5051d60 100644
--- a/arch/powerpc/include/asm/book3s/64/mmu.h
+++ b/arch/powerpc/include/asm/book3s/64/mmu.h
@@ -197,6 +197,7 @@ extern int mmu_vmemmap_psize;
 extern int mmu_io_psize;
 
 /* MMU initialization */
+void update_cpu_features(void);
 void mmu_early_init_devtree(void);
 void hash__early_init_devtree(void);
 void radix__early_init_devtree(void);
diff --git a/arch/powerpc/include/asm/mmu.h b/arch/powerpc/include/asm/mmu.h
index 8abe8e42e045..5eb494ea85d7 100644
--- a/arch/powerpc/include/asm/mmu.h
+++ b/arch/powerpc/include/asm/mmu.h
@@ -401,6 +401,7 @@ extern void early_init_mmu(void);
 extern void early_init_mmu_secondary(void);
 extern void setup_initial_memory_limit(phys_addr_t first_memblock_base,
 				       phys_addr_t first_memblock_size);
+static inline void update_cpu_features(void) { }
 static inline void mmu_early_init_devtree(void) { }
 
 static inline void pkey_early_init_devtree(void) {}
diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c
index 2e67588f6f6e..889c909e4ed4 100644
--- a/arch/powerpc/kernel/prom.c
+++ b/arch/powerpc/kernel/prom.c
@@ -380,6 +380,8 @@ static int __init early_init_dt_scan_cpus(unsigned long node,
 		check_cpu_pa_features(node);
 	}
 
+	/* Update cpu features based on kernel command line */
+	update_cpu_features();
 	identical_pvr_fixup(node);
 	init_mmu_slb_size(node);
 
diff --git a/arch/powerpc/mm/init_64.c b/arch/powerpc/mm/init_64.c
index 386be136026e..19680b42898f 100644
--- a/arch/powerpc/mm/init_64.c
+++ b/arch/powerpc/mm/init_64.c
@@ -437,12 +437,15 @@ static void __init early_check_vec5(void)
 	}
 }
 
-void __init mmu_early_init_devtree(void)
+void __init update_cpu_features(void)
 {
 	/* Disable radix mode based on kernel command line. */
 	if (disable_radix)
 		cur_cpu_spec->mmu_features &= ~MMU_FTR_TYPE_RADIX;
+}
 
+void __init mmu_early_init_devtree(void)
+{
 	/*
 	 * Check /chosen/ibm,architecture-vec-5 if running as a guest.
 	 * When running bare-metal, we can use radix if we like
-- 
2.31.1


  reply	other threads:[~2021-10-18  8:46 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-10-18  8:44 [RESEND PATCH v2 0/3] Update crashkernel offset to allow kernel to boot on large config LPARs Sourabh Jain
2021-10-18  8:44 ` Sourabh Jain [this message]
2021-11-18  6:12   ` [RESEND PATCH v2 1/3] fixup mmu_features immediately after getting cpu pa features Sourabh Jain
2021-10-18  8:44 ` [RESEND PATCH v2 2/3] Remove 256MB limit restriction for boot cpu paca allocation Sourabh Jain
2021-10-18  8:44 ` [RESEND PATCH v2 3/3] powerpc: Set crashkernel offset to mid of RMA region Sourabh Jain

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20211018084434.217772-2-sourabhjain@linux.ibm.com \
    --to=sourabhjain@linux.ibm.com \
    --cc=abdhalee@linux.vnet.ibm.com \
    --cc=aneesh.kumar@linux.ibm.com \
    --cc=hbathini@linux.ibm.com \
    --cc=linuxppc-dev@ozlabs.org \
    --cc=mahesh@linux.ibm.com \
    --cc=mahesh@linux.vnet.ibm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.