All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jens Axboe <axboe@kernel.dk>
To: linux-block@vger.kernel.org
Cc: hch@lst.de, Jens Axboe <axboe@kernel.dk>
Subject: [PATCH 1/2] nvme: move command clear into the various setup helpers
Date: Mon, 18 Oct 2021 06:49:33 -0600	[thread overview]
Message-ID: <20211018124934.235658-2-axboe@kernel.dk> (raw)
In-Reply-To: <20211018124934.235658-1-axboe@kernel.dk>

We don't have to worry about doing extra memsets by moving it outside
the protection of RQF_DONTPREP, as nvme doesn't do partial completions.

This is in preparation for making the read/write fast path not do a full
memset of the command.

Signed-off-by: Jens Axboe <axboe@kernel.dk>
---
 drivers/nvme/host/core.c | 11 ++++++++---
 drivers/nvme/host/zns.c  |  2 ++
 2 files changed, 10 insertions(+), 3 deletions(-)

diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c
index ae15cb714596..7944ad52f213 100644
--- a/drivers/nvme/host/core.c
+++ b/drivers/nvme/host/core.c
@@ -874,6 +874,7 @@ static blk_status_t nvme_setup_discard(struct nvme_ns *ns, struct request *req,
 		return BLK_STS_IOERR;
 	}
 
+	memset(cmnd, 0, sizeof(*cmnd));
 	cmnd->dsm.opcode = nvme_cmd_dsm;
 	cmnd->dsm.nsid = cpu_to_le32(ns->head->ns_id);
 	cmnd->dsm.nr = cpu_to_le32(segments - 1);
@@ -890,6 +891,8 @@ static blk_status_t nvme_setup_discard(struct nvme_ns *ns, struct request *req,
 static inline blk_status_t nvme_setup_write_zeroes(struct nvme_ns *ns,
 		struct request *req, struct nvme_command *cmnd)
 {
+	memset(cmnd, 0, sizeof(*cmnd));
+
 	if (ns->ctrl->quirks & NVME_QUIRK_DEALLOCATE_ZEROES)
 		return nvme_setup_discard(ns, req, cmnd);
 
@@ -914,6 +917,8 @@ static inline blk_status_t nvme_setup_rw(struct nvme_ns *ns,
 	u16 control = 0;
 	u32 dsmgmt = 0;
 
+	memset(cmnd, 0, sizeof(*cmnd));
+
 	if (req->cmd_flags & REQ_FUA)
 		control |= NVME_RW_FUA;
 	if (req->cmd_flags & (REQ_FAILFAST_DEV | REQ_RAHEAD))
@@ -982,17 +987,17 @@ blk_status_t nvme_setup_cmd(struct nvme_ns *ns, struct request *req)
 	struct nvme_ctrl *ctrl = nvme_req(req)->ctrl;
 	blk_status_t ret = BLK_STS_OK;
 
-	if (!(req->rq_flags & RQF_DONTPREP)) {
+	if (!(req->rq_flags & RQF_DONTPREP))
 		nvme_clear_nvme_request(req);
-		memset(cmd, 0, sizeof(*cmd));
-	}
 
 	switch (req_op(req)) {
 	case REQ_OP_DRV_IN:
 	case REQ_OP_DRV_OUT:
 		/* these are setup prior to execution in nvme_init_request() */
+		memset(cmd, 0, sizeof(*cmd));
 		break;
 	case REQ_OP_FLUSH:
+		memset(cmd, 0, sizeof(*cmd));
 		nvme_setup_flush(ns, cmd);
 		break;
 	case REQ_OP_ZONE_RESET_ALL:
diff --git a/drivers/nvme/host/zns.c b/drivers/nvme/host/zns.c
index d95010481fce..bfc259e0d7b8 100644
--- a/drivers/nvme/host/zns.c
+++ b/drivers/nvme/host/zns.c
@@ -233,6 +233,8 @@ int nvme_ns_report_zones(struct nvme_ns *ns, sector_t sector,
 blk_status_t nvme_setup_zone_mgmt_send(struct nvme_ns *ns, struct request *req,
 		struct nvme_command *c, enum nvme_zone_mgmt_action action)
 {
+	memset(c, 0, sizeof(*c));
+
 	c->zms.opcode = nvme_cmd_zone_mgmt_send;
 	c->zms.nsid = cpu_to_le32(ns->head->ns_id);
 	c->zms.slba = cpu_to_le64(nvme_sect_to_lba(ns, blk_rq_pos(req)));
-- 
2.33.1


  reply	other threads:[~2021-10-18 12:49 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-10-18 12:49 [PATCHSET v2] nvme: don't do full memset() for command setup Jens Axboe
2021-10-18 12:49 ` Jens Axboe [this message]
2021-10-18 12:53   ` [PATCH v2 1/2] nvme: move command clear into the various setup helpers Jens Axboe
2021-10-19 18:28     ` Keith Busch
2021-11-03 14:14   ` [nvme] f9c499bbbf: nvme nvme0: Identify Controller failed (16641) kernel test robot
2021-11-03 19:51     ` Jens Axboe
2021-11-03 19:51       ` Jens Axboe
2021-11-03 20:52       ` Chaitanya Kulkarni
2021-11-03 20:52         ` Chaitanya Kulkarni
2021-11-03 21:38       ` Keith Busch
2021-11-03 21:38         ` Keith Busch
2021-11-03 21:47         ` Keith Busch
2021-11-03 21:47           ` Keith Busch
2021-11-03 23:28           ` Jens Axboe
2021-11-03 23:28             ` Jens Axboe
2021-10-18 12:49 ` [PATCH 2/2] nvme: don't memset() the normal read/write command Jens Axboe
2021-10-19 18:29   ` Keith Busch

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20211018124934.235658-2-axboe@kernel.dk \
    --to=axboe@kernel.dk \
    --cc=hch@lst.de \
    --cc=linux-block@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.