From: Yu Kuai <yukuai3@huawei.com> To: <tj@kernel.org>, <axboe@kernel.dk>, <paolo.valente@linaro.org>, <avanzini.arianna@gmail.com>, <fchecconi@gmail.com> Cc: <cgroups@vger.kernel.org>, <linux-block@vger.kernel.org>, <linux-kernel@vger.kernel.org>, <yukuai3@huawei.com>, <yi.zhang@huawei.com> Subject: [PATCH v4] blk-cgroup: synchoronize blkg creation against policy deactivation Date: Wed, 20 Oct 2021 09:40:36 +0800 [thread overview] Message-ID: <20211020014036.2141723-1-yukuai3@huawei.com> (raw) Out test report a null pointer dereference: [ 168.534653] ================================================================== [ 168.535614] Disabling lock debugging due to kernel taint [ 168.536346] BUG: kernel NULL pointer dereference, address: 0000000000000008 [ 168.537274] #PF: supervisor read access in kernel mode [ 168.537964] #PF: error_code(0x0000) - not-present page [ 168.538667] PGD 0 P4D 0 [ 168.539025] Oops: 0000 [#1] PREEMPT SMP KASAN [ 168.539656] CPU: 13 PID: 759 Comm: bash Tainted: G B 5.15.0-rc2-next-202100 [ 168.540954] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20190727_0738364 [ 168.542736] RIP: 0010:bfq_pd_init+0x88/0x1e0 [ 168.543318] Code: 98 00 00 00 e8 c9 e4 5b ff 4c 8b 65 00 49 8d 7c 24 08 e8 bb e4 5b ff 4d0 [ 168.545803] RSP: 0018:ffff88817095f9c0 EFLAGS: 00010002 [ 168.546497] RAX: 0000000000000001 RBX: ffff888101a1c000 RCX: 0000000000000000 [ 168.547438] RDX: 0000000000000003 RSI: 0000000000000002 RDI: ffff888106553428 [ 168.548402] RBP: ffff888106553400 R08: ffffffff961bcaf4 R09: 0000000000000001 [ 168.549365] R10: ffffffffa2e16c27 R11: fffffbfff45c2d84 R12: 0000000000000000 [ 168.550291] R13: ffff888101a1c098 R14: ffff88810c7a08c8 R15: ffffffffa55541a0 [ 168.551221] FS: 00007fac75227700(0000) GS:ffff88839ba80000(0000) knlGS:0000000000000000 [ 168.552278] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 168.553040] CR2: 0000000000000008 CR3: 0000000165ce7000 CR4: 00000000000006e0 [ 168.554000] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 168.554929] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 168.555888] Call Trace: [ 168.556221] <TASK> [ 168.556510] blkg_create+0x1c0/0x8c0 [ 168.556989] blkg_conf_prep+0x574/0x650 [ 168.557502] ? stack_trace_save+0x99/0xd0 [ 168.558033] ? blkcg_conf_open_bdev+0x1b0/0x1b0 [ 168.558629] tg_set_conf.constprop.0+0xb9/0x280 [ 168.559231] ? kasan_set_track+0x29/0x40 [ 168.559758] ? kasan_set_free_info+0x30/0x60 [ 168.560344] ? tg_set_limit+0xae0/0xae0 [ 168.560853] ? do_sys_openat2+0x33b/0x640 [ 168.561383] ? do_sys_open+0xa2/0x100 [ 168.561877] ? __x64_sys_open+0x4e/0x60 [ 168.562383] ? __kasan_check_write+0x20/0x30 [ 168.562951] ? copyin+0x48/0x70 [ 168.563390] ? _copy_from_iter+0x234/0x9e0 [ 168.563948] tg_set_conf_u64+0x17/0x20 [ 168.564467] cgroup_file_write+0x1ad/0x380 [ 168.565014] ? cgroup_file_poll+0x80/0x80 [ 168.565568] ? __mutex_lock_slowpath+0x30/0x30 [ 168.566165] ? pgd_free+0x100/0x160 [ 168.566649] kernfs_fop_write_iter+0x21d/0x340 [ 168.567246] ? cgroup_file_poll+0x80/0x80 [ 168.567796] new_sync_write+0x29f/0x3c0 [ 168.568314] ? new_sync_read+0x410/0x410 [ 168.568840] ? __handle_mm_fault+0x1c97/0x2d80 [ 168.569425] ? copy_page_range+0x2b10/0x2b10 [ 168.570007] ? _raw_read_lock_bh+0xa0/0xa0 [ 168.570622] vfs_write+0x46e/0x630 [ 168.571091] ksys_write+0xcd/0x1e0 [ 168.571563] ? __x64_sys_read+0x60/0x60 [ 168.572081] ? __kasan_check_write+0x20/0x30 [ 168.572659] ? do_user_addr_fault+0x446/0xff0 [ 168.573264] __x64_sys_write+0x46/0x60 [ 168.573774] do_syscall_64+0x35/0x80 [ 168.574264] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 168.574960] RIP: 0033:0x7fac74915130 [ 168.575456] Code: 73 01 c3 48 8b 0d 58 ed 2c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 444 [ 168.577969] RSP: 002b:00007ffc3080e288 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 168.578986] RAX: ffffffffffffffda RBX: 0000000000000009 RCX: 00007fac74915130 [ 168.579937] RDX: 0000000000000009 RSI: 000056007669f080 RDI: 0000000000000001 [ 168.580884] RBP: 000056007669f080 R08: 000000000000000a R09: 00007fac75227700 [ 168.581841] R10: 000056007655c8f0 R11: 0000000000000246 R12: 0000000000000009 [ 168.582796] R13: 0000000000000001 R14: 00007fac74be55e0 R15: 00007fac74be08c0 [ 168.583757] </TASK> [ 168.584063] Modules linked in: [ 168.584494] CR2: 0000000000000008 [ 168.584964] ---[ end trace 2475611ad0f77a1a ]--- This is because blkg_alloc() is called from blkg_conf_prep() without holding 'q->queue_lock', and elevator is exited before blkg_create(): thread 1 thread 2 blkg_conf_prep spin_lock_irq(&q->queue_lock); blkg_lookup_check -> return NULL spin_unlock_irq(&q->queue_lock); blkg_alloc blkcg_policy_enabled -> true pd = ->pd_alloc_fn blkg->pd[i] = pd blk_mq_exit_sched bfq_exit_queue blkcg_deactivate_policy spin_lock_irq(&q->queue_lock); __clear_bit(pol->plid, q->blkcg_pols); spin_unlock_irq(&q->queue_lock); q->elevator = NULL; spin_lock_irq(&q->queue_lock); blkg_create if (blkg->pd[i]) ->pd_init_fn -> q->elevator is NULL spin_unlock_irq(&q->queue_lock); Because blkcg_deactivate_policy() requires queue to be frozen, we can grab q_usage_counter to synchoronize blkg_conf_prep() against blkcg_deactivate_policy(). Fixes: e21b7a0b9887 ("block, bfq: add full hierarchical scheduling and cgroups support") Signed-off-by: Yu Kuai <yukuai3@huawei.com> Acked-by: Tejun Heo <tj@kernel.org> --- block/blk-cgroup.c | 10 ++++++++++ Changes in V4: - fix some words. - remove patch 1 from V3. Changes in V3: - grab q_usage_counter in blkg_conf_prep() instead of introducing a new mutex. Changes in V2: - rename the patch title - instead of checking policy in blkg_create(), using a new solution. 1 file changed, 10 insertions(+) diff --git a/block/blk-cgroup.c b/block/blk-cgroup.c index ca60233c8392..e11b7e28b1b2 100644 --- a/block/blk-cgroup.c +++ b/block/blk-cgroup.c @@ -634,6 +634,14 @@ int blkg_conf_prep(struct blkcg *blkcg, const struct blkcg_policy *pol, q = bdev_get_queue(bdev); + /* + * blkcg_deactivate_policy() requires queue to be frozen, we can grab + * q_usage_counter to prevent concurrent with blkcg_deactivate_policy(). + */ + ret = blk_queue_enter(q, 0); + if (ret) + return ret; + rcu_read_lock(); spin_lock_irq(&q->queue_lock); @@ -703,6 +711,7 @@ int blkg_conf_prep(struct blkcg *blkcg, const struct blkcg_policy *pol, goto success; } success: + blk_queue_exit(q); ctx->bdev = bdev; ctx->blkg = blkg; ctx->body = input; @@ -715,6 +724,7 @@ int blkg_conf_prep(struct blkcg *blkcg, const struct blkcg_policy *pol, rcu_read_unlock(); fail: blkdev_put_no_open(bdev); + blk_queue_exit(q); /* * If queue was bypassing, we should retry. Do so after a * short msleep(). It isn't strictly necessary but queue -- 2.31.1
WARNING: multiple messages have this Message-ID (diff)
From: Yu Kuai <yukuai3-hv44wF8Li93QT0dZR+AlfA@public.gmane.org> To: tj-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org, axboe-tSWWG44O7X1aa/9Udqfwiw@public.gmane.org, paolo.valente-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org, avanzini.arianna-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org, fchecconi-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org Cc: cgroups-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-block-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, yukuai3-hv44wF8Li93QT0dZR+AlfA@public.gmane.org, yi.zhang-hv44wF8Li93QT0dZR+AlfA@public.gmane.org Subject: [PATCH v4] blk-cgroup: synchoronize blkg creation against policy deactivation Date: Wed, 20 Oct 2021 09:40:36 +0800 [thread overview] Message-ID: <20211020014036.2141723-1-yukuai3@huawei.com> (raw) Out test report a null pointer dereference: [ 168.534653] ================================================================== [ 168.535614] Disabling lock debugging due to kernel taint [ 168.536346] BUG: kernel NULL pointer dereference, address: 0000000000000008 [ 168.537274] #PF: supervisor read access in kernel mode [ 168.537964] #PF: error_code(0x0000) - not-present page [ 168.538667] PGD 0 P4D 0 [ 168.539025] Oops: 0000 [#1] PREEMPT SMP KASAN [ 168.539656] CPU: 13 PID: 759 Comm: bash Tainted: G B 5.15.0-rc2-next-202100 [ 168.540954] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20190727_0738364 [ 168.542736] RIP: 0010:bfq_pd_init+0x88/0x1e0 [ 168.543318] Code: 98 00 00 00 e8 c9 e4 5b ff 4c 8b 65 00 49 8d 7c 24 08 e8 bb e4 5b ff 4d0 [ 168.545803] RSP: 0018:ffff88817095f9c0 EFLAGS: 00010002 [ 168.546497] RAX: 0000000000000001 RBX: ffff888101a1c000 RCX: 0000000000000000 [ 168.547438] RDX: 0000000000000003 RSI: 0000000000000002 RDI: ffff888106553428 [ 168.548402] RBP: ffff888106553400 R08: ffffffff961bcaf4 R09: 0000000000000001 [ 168.549365] R10: ffffffffa2e16c27 R11: fffffbfff45c2d84 R12: 0000000000000000 [ 168.550291] R13: ffff888101a1c098 R14: ffff88810c7a08c8 R15: ffffffffa55541a0 [ 168.551221] FS: 00007fac75227700(0000) GS:ffff88839ba80000(0000) knlGS:0000000000000000 [ 168.552278] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 168.553040] CR2: 0000000000000008 CR3: 0000000165ce7000 CR4: 00000000000006e0 [ 168.554000] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 168.554929] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 168.555888] Call Trace: [ 168.556221] <TASK> [ 168.556510] blkg_create+0x1c0/0x8c0 [ 168.556989] blkg_conf_prep+0x574/0x650 [ 168.557502] ? stack_trace_save+0x99/0xd0 [ 168.558033] ? blkcg_conf_open_bdev+0x1b0/0x1b0 [ 168.558629] tg_set_conf.constprop.0+0xb9/0x280 [ 168.559231] ? kasan_set_track+0x29/0x40 [ 168.559758] ? kasan_set_free_info+0x30/0x60 [ 168.560344] ? tg_set_limit+0xae0/0xae0 [ 168.560853] ? do_sys_openat2+0x33b/0x640 [ 168.561383] ? do_sys_open+0xa2/0x100 [ 168.561877] ? __x64_sys_open+0x4e/0x60 [ 168.562383] ? __kasan_check_write+0x20/0x30 [ 168.562951] ? copyin+0x48/0x70 [ 168.563390] ? _copy_from_iter+0x234/0x9e0 [ 168.563948] tg_set_conf_u64+0x17/0x20 [ 168.564467] cgroup_file_write+0x1ad/0x380 [ 168.565014] ? cgroup_file_poll+0x80/0x80 [ 168.565568] ? __mutex_lock_slowpath+0x30/0x30 [ 168.566165] ? pgd_free+0x100/0x160 [ 168.566649] kernfs_fop_write_iter+0x21d/0x340 [ 168.567246] ? cgroup_file_poll+0x80/0x80 [ 168.567796] new_sync_write+0x29f/0x3c0 [ 168.568314] ? new_sync_read+0x410/0x410 [ 168.568840] ? __handle_mm_fault+0x1c97/0x2d80 [ 168.569425] ? copy_page_range+0x2b10/0x2b10 [ 168.570007] ? _raw_read_lock_bh+0xa0/0xa0 [ 168.570622] vfs_write+0x46e/0x630 [ 168.571091] ksys_write+0xcd/0x1e0 [ 168.571563] ? __x64_sys_read+0x60/0x60 [ 168.572081] ? __kasan_check_write+0x20/0x30 [ 168.572659] ? do_user_addr_fault+0x446/0xff0 [ 168.573264] __x64_sys_write+0x46/0x60 [ 168.573774] do_syscall_64+0x35/0x80 [ 168.574264] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 168.574960] RIP: 0033:0x7fac74915130 [ 168.575456] Code: 73 01 c3 48 8b 0d 58 ed 2c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 444 [ 168.577969] RSP: 002b:00007ffc3080e288 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 168.578986] RAX: ffffffffffffffda RBX: 0000000000000009 RCX: 00007fac74915130 [ 168.579937] RDX: 0000000000000009 RSI: 000056007669f080 RDI: 0000000000000001 [ 168.580884] RBP: 000056007669f080 R08: 000000000000000a R09: 00007fac75227700 [ 168.581841] R10: 000056007655c8f0 R11: 0000000000000246 R12: 0000000000000009 [ 168.582796] R13: 0000000000000001 R14: 00007fac74be55e0 R15: 00007fac74be08c0 [ 168.583757] </TASK> [ 168.584063] Modules linked in: [ 168.584494] CR2: 0000000000000008 [ 168.584964] ---[ end trace 2475611ad0f77a1a ]--- This is because blkg_alloc() is called from blkg_conf_prep() without holding 'q->queue_lock', and elevator is exited before blkg_create(): thread 1 thread 2 blkg_conf_prep spin_lock_irq(&q->queue_lock); blkg_lookup_check -> return NULL spin_unlock_irq(&q->queue_lock); blkg_alloc blkcg_policy_enabled -> true pd = ->pd_alloc_fn blkg->pd[i] = pd blk_mq_exit_sched bfq_exit_queue blkcg_deactivate_policy spin_lock_irq(&q->queue_lock); __clear_bit(pol->plid, q->blkcg_pols); spin_unlock_irq(&q->queue_lock); q->elevator = NULL; spin_lock_irq(&q->queue_lock); blkg_create if (blkg->pd[i]) ->pd_init_fn -> q->elevator is NULL spin_unlock_irq(&q->queue_lock); Because blkcg_deactivate_policy() requires queue to be frozen, we can grab q_usage_counter to synchoronize blkg_conf_prep() against blkcg_deactivate_policy(). Fixes: e21b7a0b9887 ("block, bfq: add full hierarchical scheduling and cgroups support") Signed-off-by: Yu Kuai <yukuai3-hv44wF8Li93QT0dZR+AlfA@public.gmane.org> Acked-by: Tejun Heo <tj-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org> --- block/blk-cgroup.c | 10 ++++++++++ Changes in V4: - fix some words. - remove patch 1 from V3. Changes in V3: - grab q_usage_counter in blkg_conf_prep() instead of introducing a new mutex. Changes in V2: - rename the patch title - instead of checking policy in blkg_create(), using a new solution. 1 file changed, 10 insertions(+) diff --git a/block/blk-cgroup.c b/block/blk-cgroup.c index ca60233c8392..e11b7e28b1b2 100644 --- a/block/blk-cgroup.c +++ b/block/blk-cgroup.c @@ -634,6 +634,14 @@ int blkg_conf_prep(struct blkcg *blkcg, const struct blkcg_policy *pol, q = bdev_get_queue(bdev); + /* + * blkcg_deactivate_policy() requires queue to be frozen, we can grab + * q_usage_counter to prevent concurrent with blkcg_deactivate_policy(). + */ + ret = blk_queue_enter(q, 0); + if (ret) + return ret; + rcu_read_lock(); spin_lock_irq(&q->queue_lock); @@ -703,6 +711,7 @@ int blkg_conf_prep(struct blkcg *blkcg, const struct blkcg_policy *pol, goto success; } success: + blk_queue_exit(q); ctx->bdev = bdev; ctx->blkg = blkg; ctx->body = input; @@ -715,6 +724,7 @@ int blkg_conf_prep(struct blkcg *blkcg, const struct blkcg_policy *pol, rcu_read_unlock(); fail: blkdev_put_no_open(bdev); + blk_queue_exit(q); /* * If queue was bypassing, we should retry. Do so after a * short msleep(). It isn't strictly necessary but queue -- 2.31.1
next reply other threads:[~2021-10-20 1:28 UTC|newest] Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-10-20 1:40 Yu Kuai [this message] 2021-10-20 1:40 ` [PATCH v4] blk-cgroup: synchoronize blkg creation against policy deactivation Yu Kuai 2021-10-22 1:28 ` yukuai (C) 2021-10-22 1:28 ` yukuai (C) 2021-10-25 13:41 ` yukuai (C) 2021-10-25 13:41 ` yukuai (C) 2021-10-25 14:07 ` Jens Axboe 2021-10-25 14:07 ` Jens Axboe
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20211020014036.2141723-1-yukuai3@huawei.com \ --to=yukuai3@huawei.com \ --cc=avanzini.arianna@gmail.com \ --cc=axboe@kernel.dk \ --cc=cgroups@vger.kernel.org \ --cc=fchecconi@gmail.com \ --cc=linux-block@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=paolo.valente@linaro.org \ --cc=tj@kernel.org \ --cc=yi.zhang@huawei.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.