All of lore.kernel.org
 help / color / mirror / Atom feed
From: David Heidelberg <david@ixit.cz>
To: Andy Gross <agross@kernel.org>,
	Bjorn Andersson <bjorn.andersson@linaro.org>,
	Rob Herring <robh+dt@kernel.org>
Cc: ~okias/devicetree@lists.sr.ht, David Heidelberg <david@ixit.cz>,
	linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH] ARM: dts: qcom: correct mmc node naming
Date: Wed, 20 Oct 2021 22:14:39 +0200	[thread overview]
Message-ID: <20211020201440.229196-1-david@ixit.cz> (raw)

MMC nodes has to be named mmc@ to comply with dt-bindings.

Fix warnings as:
arch/arm/boot/dts/qcom-msm8660-surf.dt.yaml: sdcc@12400000: $nodename:0: 'sdcc@12400000' does not match '^mmc(@.*)?$'
	From schema: Documentation/devicetree/bindings/mmc/arm,pl18x.yaml

Signed-off-by: David Heidelberg <david@ixit.cz>
---
 arch/arm/boot/dts/qcom-apq8060-dragonboard.dts      |  6 +++---
 arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts  |  2 +-
 arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts         |  6 +++---
 arch/arm/boot/dts/qcom-apq8064-ifc6410.dts          |  6 +++---
 arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts |  4 ++--
 arch/arm/boot/dts/qcom-apq8064.dtsi                 |  6 +++---
 arch/arm/boot/dts/qcom-ipq8064.dtsi                 |  4 ++--
 arch/arm/boot/dts/qcom-mdm9615.dtsi                 |  4 ++--
 arch/arm/boot/dts/qcom-msm8660-surf.dts             |  4 ++--
 arch/arm/boot/dts/qcom-msm8660.dtsi                 | 10 +++++-----
 arch/arm/boot/dts/qcom-msm8960-cdp.dts              |  4 ++--
 arch/arm/boot/dts/qcom-msm8960.dtsi                 |  4 ++--
 12 files changed, 30 insertions(+), 30 deletions(-)

diff --git a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts
index 5bedbb902ad5..d664ccd454c5 100644
--- a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts
+++ b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts
@@ -899,7 +899,7 @@ ncp {
 		};
 		amba {
 			/* Internal 3.69 GiB eMMC */
-			sdcc@12400000 {
+			mmc@12400000 {
 				status = "okay";
 				pinctrl-names = "default";
 				pinctrl-0 = <&dragon_sdcc1_pins>;
@@ -908,7 +908,7 @@ sdcc@12400000 {
 			};
 
 			/* External micro SD card, directly connected, pulled up to 2.85 V */
-			sdcc@12180000 {
+			mmc@12180000 {
 				status = "okay";
 				/* Enable SSBI GPIO 22 as input, use for card detect */
 				pinctrl-names = "default";
@@ -922,7 +922,7 @@ sdcc@12180000 {
 			 * Second external micro SD card, using two TXB104RGYR levelshifters
 			 * to lift from 1.8 V to 2.85 V
 			 */
-			sdcc@12200000 {
+			mmc@12200000 {
 				status = "okay";
 				/* Enable SSBI GPIO 26 as input, use for card detect */
 				pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts b/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts
index 197494ef887b..b2cd32f440e0 100644
--- a/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts
@@ -367,7 +367,7 @@ phy {
 
 		amba {
 			/* eMMC */
-			sdcc@12400000 {
+			mmc@12400000 {
 				status = "okay";
 				vmmc-supply = <&pm8921_l5>;
 				vqmmc-supply = <&pm8921_s4>;
diff --git a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
index 0148148a8e0a..e068a8d0adf0 100644
--- a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
@@ -220,14 +220,14 @@ pci@1b500000 {
 
 		amba {
 			/* eMMC */
-			sdcc1: sdcc@12400000 {
+			sdcc1: mmc@12400000 {
 				status = "okay";
 				vmmc-supply = <&pm8921_l5>;
 				vqmmc-supply = <&pm8921_s4>;
 			};
 
 			/* External micro SD card */
-			sdcc3: sdcc@12180000 {
+			sdcc3: mmc@12180000 {
 				status = "okay";
 				vmmc-supply = <&v3p3_fixed>;
 				pinctrl-names	= "default";
@@ -235,7 +235,7 @@ sdcc3: sdcc@12180000 {
 				cd-gpios	= <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>;
 			};
 			/* WLAN */
-			sdcc4: sdcc@121c0000 {
+			sdcc4: mmc@121c0000 {
 				status = "okay";
 				vmmc-supply = <&v3p3_fixed>;
 				vqmmc-supply = <&v3p3_fixed>;
diff --git a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
index d0a17b5a5fa3..2638b380be20 100644
--- a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
@@ -314,14 +314,14 @@ pios {
 
 		amba {
 			/* eMMC */
-			sdcc1: sdcc@12400000 {
+			sdcc1: mmc@12400000 {
 				status = "okay";
 				vmmc-supply = <&pm8921_l5>;
 				vqmmc-supply = <&pm8921_s4>;
 			};
 
 			/* External micro SD card */
-			sdcc3: sdcc@12180000 {
+			sdcc3: mmc@12180000 {
 				status = "okay";
 				vmmc-supply = <&pm8921_l6>;
 				pinctrl-names	= "default";
@@ -329,7 +329,7 @@ sdcc3: sdcc@12180000 {
 				cd-gpios	= <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>;
 			};
 			/* WLAN */
-			sdcc4: sdcc@121c0000 {
+			sdcc4: mmc@121c0000 {
 				status = "okay";
 				vmmc-supply = <&ext_3p3v>;
 				vqmmc-supply = <&pm8921_lvs1>;
diff --git a/arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts b/arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts
index 72e47bdc5c12..f8c97efc61fc 100644
--- a/arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts
@@ -374,14 +374,14 @@ serial@1a240000 {
 		};
 
 		amba {
-			sdcc1: sdcc@12400000 {
+			sdcc1: mmc@12400000 {
 				status = "okay";
 
 				vmmc-supply = <&pm8921_l5>;
 				vqmmc-supply = <&pm8921_s4>;
 			};
 
-			sdcc3: sdcc@12180000 {
+			sdcc3: mmc@12180000 {
 				status = "okay";
 
 				vmmc-supply = <&pm8921_l6>;
diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
index 8a389323a474..ed1cd2c529cc 100644
--- a/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -1073,7 +1073,7 @@ amba {
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
-			sdcc1: sdcc@12400000 {
+			sdcc1: mmc@12400000 {
 				status		= "disabled";
 				compatible	= "arm,pl18x", "arm,primecell";
 				pinctrl-names	= "default";
@@ -1093,7 +1093,7 @@ sdcc1: sdcc@12400000 {
 				dma-names = "tx", "rx";
 			};
 
-			sdcc3: sdcc@12180000 {
+			sdcc3: mmc@12180000 {
 				compatible	= "arm,pl18x", "arm,primecell";
 				arm,primecell-periphid = <0x00051180>;
 				status		= "disabled";
@@ -1111,7 +1111,7 @@ sdcc3: sdcc@12180000 {
 				dma-names = "tx", "rx";
 			};
 
-			sdcc4: sdcc@121c0000 {
+			sdcc4: mmc@121c0000 {
 				compatible	= "arm,pl18x", "arm,primecell";
 				arm,primecell-periphid = <0x00051180>;
 				status		= "disabled";
diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi
index 110113f3b8e2..7f67b282da10 100644
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -1181,7 +1181,7 @@ amba: amba {
 			#size-cells = <1>;
 			ranges;
 
-			sdcc1: sdcc@12400000 {
+			sdcc1: mmc@12400000 {
 				status          = "disabled";
 				compatible      = "arm,pl18x", "arm,primecell";
 				arm,primecell-periphid = <0x00051180>;
@@ -1201,7 +1201,7 @@ sdcc1: sdcc@12400000 {
 				dma-names = "tx", "rx";
 			};
 
-			sdcc3: sdcc@12180000 {
+			sdcc3: mmc@12180000 {
 				compatible      = "arm,pl18x", "arm,primecell";
 				arm,primecell-periphid = <0x00051180>;
 				status          = "disabled";
diff --git a/arch/arm/boot/dts/qcom-mdm9615.dtsi b/arch/arm/boot/dts/qcom-mdm9615.dtsi
index 6e90c5d5a050..c32415f0e66d 100644
--- a/arch/arm/boot/dts/qcom-mdm9615.dtsi
+++ b/arch/arm/boot/dts/qcom-mdm9615.dtsi
@@ -354,7 +354,7 @@ amba {
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
-			sdcc1: sdcc@12180000 {
+			sdcc1: mmc@12180000 {
 				status = "disabled";
 				compatible = "arm,pl18x", "arm,primecell";
 				arm,primecell-periphid = <0x00051180>;
@@ -374,7 +374,7 @@ sdcc1: sdcc@12180000 {
 				assigned-clock-rates = <400000>;
 			};
 
-			sdcc2: sdcc@12140000 {
+			sdcc2: mmc@12140000 {
 				compatible = "arm,pl18x", "arm,primecell";
 				arm,primecell-periphid = <0x00051180>;
 				status = "disabled";
diff --git a/arch/arm/boot/dts/qcom-msm8660-surf.dts b/arch/arm/boot/dts/qcom-msm8660-surf.dts
index 6a321ccb0bd0..414280d9bdba 100644
--- a/arch/arm/boot/dts/qcom-msm8660-surf.dts
+++ b/arch/arm/boot/dts/qcom-msm8660-surf.dts
@@ -35,13 +35,13 @@ vsdcc_fixed: vsdcc-regulator {
 
 		amba {
 			/* eMMC */
-			sdcc1: sdcc@12400000 {
+			sdcc1: mmc@12400000 {
 				status = "okay";
 				vmmc-supply = <&vsdcc_fixed>;
 			};
 
 			/* External micro SD card */
-			sdcc3: sdcc@12180000 {
+			sdcc3: mmc@12180000 {
 				status = "okay";
 				vmmc-supply = <&vsdcc_fixed>;
 			};
diff --git a/arch/arm/boot/dts/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom-msm8660.dtsi
index 21cb58ab68ac..1e8aab357f9c 100644
--- a/arch/arm/boot/dts/qcom-msm8660.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8660.dtsi
@@ -483,7 +483,7 @@ amba {
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
-			sdcc1: sdcc@12400000 {
+			sdcc1: mmc@12400000 {
 				status		= "disabled";
 				compatible	= "arm,pl18x", "arm,primecell";
 				arm,primecell-periphid = <0x00051180>;
@@ -499,7 +499,7 @@ sdcc1: sdcc@12400000 {
 				cap-mmc-highspeed;
 			};
 
-			sdcc2: sdcc@12140000 {
+			sdcc2: mmc@12140000 {
 				status		= "disabled";
 				compatible	= "arm,pl18x", "arm,primecell";
 				arm,primecell-periphid = <0x00051180>;
@@ -514,7 +514,7 @@ sdcc2: sdcc@12140000 {
 				cap-mmc-highspeed;
 			};
 
-			sdcc3: sdcc@12180000 {
+			sdcc3: mmc@12180000 {
 				compatible	= "arm,pl18x", "arm,primecell";
 				arm,primecell-periphid = <0x00051180>;
 				status		= "disabled";
@@ -530,7 +530,7 @@ sdcc3: sdcc@12180000 {
 				no-1-8-v;
 			};
 
-			sdcc4: sdcc@121c0000 {
+			sdcc4: mmc@121c0000 {
 				compatible	= "arm,pl18x", "arm,primecell";
 				arm,primecell-periphid = <0x00051180>;
 				status		= "disabled";
@@ -545,7 +545,7 @@ sdcc4: sdcc@121c0000 {
 				cap-mmc-highspeed;
 			};
 
-			sdcc5: sdcc@12200000 {
+			sdcc5: mmc@12200000 {
 				compatible	= "arm,pl18x", "arm,primecell";
 				arm,primecell-periphid = <0x00051180>;
 				status		= "disabled";
diff --git a/arch/arm/boot/dts/qcom-msm8960-cdp.dts b/arch/arm/boot/dts/qcom-msm8960-cdp.dts
index e7d2e937ea4c..4af01039c3b2 100644
--- a/arch/arm/boot/dts/qcom-msm8960-cdp.dts
+++ b/arch/arm/boot/dts/qcom-msm8960-cdp.dts
@@ -26,12 +26,12 @@ serial@16440000 {
 
 		amba {
 			/* eMMC */
-			sdcc1: sdcc@12400000 {
+			sdcc1: mmc@12400000 {
 				status = "okay";
 			};
 
 			/* External micro SD card */
-			sdcc3: sdcc@12180000 {
+			sdcc3: mmc@12180000 {
 				status = "okay";
 			};
 		};
diff --git a/arch/arm/boot/dts/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom-msm8960.dtsi
index 172ea3c70eac..2a0ec97a264f 100644
--- a/arch/arm/boot/dts/qcom-msm8960.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8960.dtsi
@@ -263,7 +263,7 @@ amba {
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
-			sdcc1: sdcc@12400000 {
+			sdcc1: mmc@12400000 {
 				status		= "disabled";
 				compatible	= "arm,pl18x", "arm,primecell";
 				arm,primecell-periphid = <0x00051180>;
@@ -280,7 +280,7 @@ sdcc1: sdcc@12400000 {
 				vmmc-supply = <&vsdcc_fixed>;
 			};
 
-			sdcc3: sdcc@12180000 {
+			sdcc3: mmc@12180000 {
 				compatible	= "arm,pl18x", "arm,primecell";
 				arm,primecell-periphid = <0x00051180>;
 				status		= "disabled";
-- 
2.33.0


                 reply	other threads:[~2021-10-20 20:14 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20211020201440.229196-1-david@ixit.cz \
    --to=david@ixit.cz \
    --cc=agross@kernel.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=~okias/devicetree@lists.sr.ht \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.