From: Khaled Almahallawy <khaled.almahallawy@intel.com> To: dri-devel@lists.freedesktop.org, intel-gfx@lists.freedesktop.org, amd-gfx@lists.freedesktop.org, linux-arm-msm@vger.kernel.org Cc: Khaled Almahallawy <khaled.almahallawy@intel.com> Subject: [RFC PATCH 1/4] drm/dp: Rename DPCD 248h according to DP 2.0 specs Date: Wed, 20 Oct 2021 22:07:10 -0700 [thread overview] Message-ID: <20211021050713.836498-2-khaled.almahallawy@intel.com> (raw) In-Reply-To: <20211021050713.836498-1-khaled.almahallawy@intel.com> DPCD 248h name was changed from “PHY_TEST_PATTERN” in DP 1.4 to “LINK_QUAL_PATTERN_SELECT” in DP 2.0. Also, DPCD 248h [6:0] is the same as DPCDs 10Bh/10Ch/10Dh/10Eh [6:0]. So removed the repeated definition of PHY patterns. Reference: “DPCD 248h/10Bh/10Ch/10Dh/10Eh Name/Description Consistency” https://groups.vesa.org/wg/AllMem/documentComment/2738 Signed-off-by: Khaled Almahallawy <khaled.almahallawy@intel.com> --- drivers/gpu/drm/drm_dp_helper.c | 6 +++--- include/drm/drm_dp_helper.h | 13 +++---------- 2 files changed, 6 insertions(+), 13 deletions(-) diff --git a/drivers/gpu/drm/drm_dp_helper.c b/drivers/gpu/drm/drm_dp_helper.c index ada0a1ff262d..c9c928c08026 100644 --- a/drivers/gpu/drm/drm_dp_helper.c +++ b/drivers/gpu/drm/drm_dp_helper.c @@ -2489,19 +2489,19 @@ int drm_dp_get_phy_test_pattern(struct drm_dp_aux *aux, if (lanes & DP_ENHANCED_FRAME_CAP) data->enhanced_frame_cap = true; - err = drm_dp_dpcd_readb(aux, DP_PHY_TEST_PATTERN, &data->phy_pattern); + err = drm_dp_dpcd_readb(aux, DP_LINK_QUAL_PATTERN_SELECT, &data->phy_pattern); if (err < 0) return err; switch (data->phy_pattern) { - case DP_PHY_TEST_PATTERN_80BIT_CUSTOM: + case DP_LINK_QUAL_PATTERN_80BIT_CUSTOM: err = drm_dp_dpcd_read(aux, DP_TEST_80BIT_CUSTOM_PATTERN_7_0, &data->custom80, sizeof(data->custom80)); if (err < 0) return err; break; - case DP_PHY_TEST_PATTERN_CP2520: + case DP_LINK_QUAL_PATTERN_CP2520_PAT_1: err = drm_dp_dpcd_read(aux, DP_TEST_HBR2_SCRAMBLER_RESET, &data->hbr2_reset, sizeof(data->hbr2_reset)); diff --git a/include/drm/drm_dp_helper.h b/include/drm/drm_dp_helper.h index afdf7f4183f9..ef915bb75bb4 100644 --- a/include/drm/drm_dp_helper.h +++ b/include/drm/drm_dp_helper.h @@ -862,16 +862,9 @@ struct drm_panel; # define DP_TEST_CRC_SUPPORTED (1 << 5) # define DP_TEST_COUNT_MASK 0xf -#define DP_PHY_TEST_PATTERN 0x248 -# define DP_PHY_TEST_PATTERN_SEL_MASK 0x7 -# define DP_PHY_TEST_PATTERN_NONE 0x0 -# define DP_PHY_TEST_PATTERN_D10_2 0x1 -# define DP_PHY_TEST_PATTERN_ERROR_COUNT 0x2 -# define DP_PHY_TEST_PATTERN_PRBS7 0x3 -# define DP_PHY_TEST_PATTERN_80BIT_CUSTOM 0x4 -# define DP_PHY_TEST_PATTERN_CP2520 0x5 - -#define DP_PHY_SQUARE_PATTERN 0x249 +#define DP_LINK_QUAL_PATTERN_SELECT 0x248 + +#define DP_PHY_SQUARE_PATTERN 0x249 #define DP_TEST_HBR2_SCRAMBLER_RESET 0x24A #define DP_TEST_80BIT_CUSTOM_PATTERN_7_0 0x250 -- 2.25.1
WARNING: multiple messages have this Message-ID (diff)
From: Khaled Almahallawy <khaled.almahallawy@intel.com> To: dri-devel@lists.freedesktop.org, intel-gfx@lists.freedesktop.org, amd-gfx@lists.freedesktop.org, linux-arm-msm@vger.kernel.org Cc: Khaled Almahallawy <khaled.almahallawy@intel.com> Subject: [Intel-gfx] [RFC PATCH 1/4] drm/dp: Rename DPCD 248h according to DP 2.0 specs Date: Wed, 20 Oct 2021 22:07:10 -0700 [thread overview] Message-ID: <20211021050713.836498-2-khaled.almahallawy@intel.com> (raw) In-Reply-To: <20211021050713.836498-1-khaled.almahallawy@intel.com> DPCD 248h name was changed from “PHY_TEST_PATTERN” in DP 1.4 to “LINK_QUAL_PATTERN_SELECT” in DP 2.0. Also, DPCD 248h [6:0] is the same as DPCDs 10Bh/10Ch/10Dh/10Eh [6:0]. So removed the repeated definition of PHY patterns. Reference: “DPCD 248h/10Bh/10Ch/10Dh/10Eh Name/Description Consistency” https://groups.vesa.org/wg/AllMem/documentComment/2738 Signed-off-by: Khaled Almahallawy <khaled.almahallawy@intel.com> --- drivers/gpu/drm/drm_dp_helper.c | 6 +++--- include/drm/drm_dp_helper.h | 13 +++---------- 2 files changed, 6 insertions(+), 13 deletions(-) diff --git a/drivers/gpu/drm/drm_dp_helper.c b/drivers/gpu/drm/drm_dp_helper.c index ada0a1ff262d..c9c928c08026 100644 --- a/drivers/gpu/drm/drm_dp_helper.c +++ b/drivers/gpu/drm/drm_dp_helper.c @@ -2489,19 +2489,19 @@ int drm_dp_get_phy_test_pattern(struct drm_dp_aux *aux, if (lanes & DP_ENHANCED_FRAME_CAP) data->enhanced_frame_cap = true; - err = drm_dp_dpcd_readb(aux, DP_PHY_TEST_PATTERN, &data->phy_pattern); + err = drm_dp_dpcd_readb(aux, DP_LINK_QUAL_PATTERN_SELECT, &data->phy_pattern); if (err < 0) return err; switch (data->phy_pattern) { - case DP_PHY_TEST_PATTERN_80BIT_CUSTOM: + case DP_LINK_QUAL_PATTERN_80BIT_CUSTOM: err = drm_dp_dpcd_read(aux, DP_TEST_80BIT_CUSTOM_PATTERN_7_0, &data->custom80, sizeof(data->custom80)); if (err < 0) return err; break; - case DP_PHY_TEST_PATTERN_CP2520: + case DP_LINK_QUAL_PATTERN_CP2520_PAT_1: err = drm_dp_dpcd_read(aux, DP_TEST_HBR2_SCRAMBLER_RESET, &data->hbr2_reset, sizeof(data->hbr2_reset)); diff --git a/include/drm/drm_dp_helper.h b/include/drm/drm_dp_helper.h index afdf7f4183f9..ef915bb75bb4 100644 --- a/include/drm/drm_dp_helper.h +++ b/include/drm/drm_dp_helper.h @@ -862,16 +862,9 @@ struct drm_panel; # define DP_TEST_CRC_SUPPORTED (1 << 5) # define DP_TEST_COUNT_MASK 0xf -#define DP_PHY_TEST_PATTERN 0x248 -# define DP_PHY_TEST_PATTERN_SEL_MASK 0x7 -# define DP_PHY_TEST_PATTERN_NONE 0x0 -# define DP_PHY_TEST_PATTERN_D10_2 0x1 -# define DP_PHY_TEST_PATTERN_ERROR_COUNT 0x2 -# define DP_PHY_TEST_PATTERN_PRBS7 0x3 -# define DP_PHY_TEST_PATTERN_80BIT_CUSTOM 0x4 -# define DP_PHY_TEST_PATTERN_CP2520 0x5 - -#define DP_PHY_SQUARE_PATTERN 0x249 +#define DP_LINK_QUAL_PATTERN_SELECT 0x248 + +#define DP_PHY_SQUARE_PATTERN 0x249 #define DP_TEST_HBR2_SCRAMBLER_RESET 0x24A #define DP_TEST_80BIT_CUSTOM_PATTERN_7_0 0x250 -- 2.25.1
next prev parent reply other threads:[~2021-10-21 5:07 UTC|newest] Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-10-21 5:07 [RFC PATCH 0/4] drm/dp: Use DP2.0 DPCD 248h updated register/field names for DP PHY CTS Khaled Almahallawy 2021-10-21 5:07 ` [Intel-gfx] " Khaled Almahallawy 2021-10-21 5:07 ` Khaled Almahallawy [this message] 2021-10-21 5:07 ` [Intel-gfx] [RFC PATCH 1/4] drm/dp: Rename DPCD 248h according to DP 2.0 specs Khaled Almahallawy 2021-10-21 9:56 ` Jani Nikula 2021-10-21 5:07 ` [RFC PATCH 2/4] drm/i915/dp: Use DP 2.0 LINK_QUAL_PATTERN_* Phy test pattern definitions Khaled Almahallawy 2021-10-21 5:07 ` [Intel-gfx] " Khaled Almahallawy 2021-10-21 5:07 ` [RFC PATCH 3/4] drm/amd/dc: Use DPCD 248h DP 2.0 new name Khaled Almahallawy 2021-10-21 5:07 ` [Intel-gfx] " Khaled Almahallawy 2021-10-21 5:07 ` [RFC PATCH 4/4] drm/msm/dp: Use DPCD 248h DP 2.0 new names/definitions Khaled Almahallawy 2021-10-21 5:07 ` [Intel-gfx] " Khaled Almahallawy 2021-10-26 2:43 ` kernel test robot 2021-10-21 5:32 ` [Intel-gfx] ✗ Fi.CI.CHECKPATCH: warning for drm/dp: Use DP2.0 DPCD 248h updated register/field names for DP PHY CTS Patchwork 2021-10-21 5:35 ` [Intel-gfx] ✗ Fi.CI.SPARSE: " Patchwork 2021-10-21 6:01 ` [Intel-gfx] ✓ Fi.CI.BAT: success " Patchwork 2021-10-21 9:03 ` [Intel-gfx] ✓ Fi.CI.IGT: " Patchwork 2021-10-21 10:00 ` [RFC PATCH 0/4] " Jani Nikula 2021-10-21 10:00 ` [Intel-gfx] " Jani Nikula 2021-10-21 23:13 ` Almahallawy, Khaled 2021-10-21 23:13 ` [Intel-gfx] " Almahallawy, Khaled
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20211021050713.836498-2-khaled.almahallawy@intel.com \ --to=khaled.almahallawy@intel.com \ --cc=amd-gfx@lists.freedesktop.org \ --cc=dri-devel@lists.freedesktop.org \ --cc=intel-gfx@lists.freedesktop.org \ --cc=linux-arm-msm@vger.kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.