From: Linus Walleij <linus.walleij@linaro.org>
To: arm@kernel.org, soc@kernel.org
Cc: linux-arm-kernel@lists.infradead.org,
Rob Herring <robh@kernel.org>,
Linus Walleij <linus.walleij@linaro.org>,
Liviu Dudau <liviu.dudau@arm.com>,
Sudeep Holla <sudeep.holla@arm.com>,
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Subject: [PATCH] ARM: dts: arm: Update register-bit-led nodes 'reg' and node names
Date: Mon, 25 Oct 2021 01:20:03 +0200 [thread overview]
Message-ID: <20211024232003.211484-1-linus.walleij@linaro.org> (raw)
From: Rob Herring <robh@kernel.org>
Add a 'reg' entry for register-bit-led nodes on the Arm Ltd platforms.
The 'reg' entry is the LED control register address. With this, the node
name can be updated to use a generic node name, 'led', and a
unit-address.
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
SoC folks: please apply this directly for v5.16.
---
arch/arm/boot/dts/arm-realview-eb.dtsi | 27 +++++++++++++------
arch/arm/boot/dts/arm-realview-pb1176.dts | 27 +++++++++++++------
arch/arm/boot/dts/arm-realview-pb11mp.dts | 27 +++++++++++++------
arch/arm/boot/dts/arm-realview-pbx.dtsi | 27 +++++++++++++------
arch/arm/boot/dts/integrator.dtsi | 23 +++++++++++-----
arch/arm/boot/dts/mps2.dtsi | 10 +++++--
arch/arm/boot/dts/versatile-ab-ib2.dts | 6 ++++-
arch/arm/boot/dts/versatile-ab.dts | 27 +++++++++++++------
arch/arm64/boot/dts/arm/juno-motherboard.dtsi | 27 +++++++++++++------
9 files changed, 144 insertions(+), 57 deletions(-)
diff --git a/arch/arm/boot/dts/arm-realview-eb.dtsi b/arch/arm/boot/dts/arm-realview-eb.dtsi
index 04e8a27ba1eb..56441ef08a55 100644
--- a/arch/arm/boot/dts/arm-realview-eb.dtsi
+++ b/arch/arm/boot/dts/arm-realview-eb.dtsi
@@ -198,61 +198,72 @@ fpga {
syscon: syscon@10000000 {
compatible = "arm,realview-eb-syscon", "syscon", "simple-mfd";
reg = <0x10000000 0x1000>;
+ ranges = <0x0 0x10000000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
- led@08.0 {
+ led@8,0 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x01>;
label = "versatile:0";
linux,default-trigger = "heartbeat";
default-state = "on";
};
- led@08.1 {
+ led@8,1 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x02>;
label = "versatile:1";
linux,default-trigger = "mmc0";
default-state = "off";
};
- led@08.2 {
+ led@8,2 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x04>;
label = "versatile:2";
linux,default-trigger = "cpu0";
default-state = "off";
};
- led@08.3 {
+ led@8,3 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x08>;
label = "versatile:3";
default-state = "off";
};
- led@08.4 {
+ led@8,4 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x10>;
label = "versatile:4";
default-state = "off";
};
- led@08.5 {
+ led@8,5 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x20>;
label = "versatile:5";
default-state = "off";
};
- led@08.6 {
+ led@8,6 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x40>;
label = "versatile:6";
default-state = "off";
};
- led@08.7 {
+ led@8,7 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x80>;
label = "versatile:7";
diff --git a/arch/arm/boot/dts/arm-realview-pb1176.dts b/arch/arm/boot/dts/arm-realview-pb1176.dts
index 366687fb1ee3..df71ee27294d 100644
--- a/arch/arm/boot/dts/arm-realview-pb1176.dts
+++ b/arch/arm/boot/dts/arm-realview-pb1176.dts
@@ -216,61 +216,72 @@ soc {
syscon: syscon@10000000 {
compatible = "arm,realview-pb1176-syscon", "syscon", "simple-mfd";
reg = <0x10000000 0x1000>;
+ ranges = <0x0 0x10000000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
- led@08.0 {
+ led@8,0 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x01>;
label = "versatile:0";
linux,default-trigger = "heartbeat";
default-state = "on";
};
- led@08.1 {
+ led@8,1 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x02>;
label = "versatile:1";
linux,default-trigger = "mmc0";
default-state = "off";
};
- led@08.2 {
+ led@8,2 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x04>;
label = "versatile:2";
linux,default-trigger = "cpu0";
default-state = "off";
};
- led@08.3 {
+ led@8,3 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x08>;
label = "versatile:3";
default-state = "off";
};
- led@08.4 {
+ led@8,4 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x10>;
label = "versatile:4";
default-state = "off";
};
- led@08.5 {
+ led@8,5 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x20>;
label = "versatile:5";
default-state = "off";
};
- led@08.6 {
+ led@8,6 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x40>;
label = "versatile:6";
default-state = "off";
};
- led@08.7 {
+ led@8,7 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x80>;
label = "versatile:7";
diff --git a/arch/arm/boot/dts/arm-realview-pb11mp.dts b/arch/arm/boot/dts/arm-realview-pb11mp.dts
index 228a51a38f95..54d4cbd10bdf 100644
--- a/arch/arm/boot/dts/arm-realview-pb11mp.dts
+++ b/arch/arm/boot/dts/arm-realview-pb11mp.dts
@@ -303,64 +303,75 @@ soc {
pb11mp_syscon: syscon@10000000 {
compatible = "arm,realview-pb11mp-syscon", "syscon", "simple-mfd";
reg = <0x10000000 0x1000>;
+ ranges = <0x0 0x10000000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
- led@08.0 {
+ led@8,0 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x01>;
label = "versatile:0";
linux,default-trigger = "heartbeat";
default-state = "on";
};
- led@08.1 {
+ led@8,1 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x02>;
label = "versatile:1";
linux,default-trigger = "mmc0";
default-state = "off";
};
- led@08.2 {
+ led@8,2 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x04>;
label = "versatile:2";
linux,default-trigger = "cpu0";
default-state = "off";
};
- led@08.3 {
+ led@8,3 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x08>;
label = "versatile:3";
linux,default-trigger = "cpu1";
default-state = "off";
};
- led@08.4 {
+ led@8,4 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x10>;
label = "versatile:4";
linux,default-trigger = "cpu2";
default-state = "off";
};
- led@08.5 {
+ led@8,5 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x20>;
label = "versatile:5";
linux,default-trigger = "cpu3";
default-state = "off";
};
- led@08.6 {
+ led@8,6 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x40>;
label = "versatile:6";
default-state = "off";
};
- led@08.7 {
+ led@8,7 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x80>;
label = "versatile:7";
diff --git a/arch/arm/boot/dts/arm-realview-pbx.dtsi b/arch/arm/boot/dts/arm-realview-pbx.dtsi
index ccf6f756b6ed..9366fecc699b 100644
--- a/arch/arm/boot/dts/arm-realview-pbx.dtsi
+++ b/arch/arm/boot/dts/arm-realview-pbx.dtsi
@@ -220,61 +220,72 @@ soc: soc {
syscon: syscon@10000000 {
compatible = "arm,realview-pbx-syscon", "syscon", "simple-mfd";
reg = <0x10000000 0x1000>;
+ ranges = <0x0 0x10000000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
- led@08.0 {
+ led@8,0 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x01>;
label = "versatile:0";
linux,default-trigger = "heartbeat";
default-state = "on";
};
- led@08.1 {
+ led@8,1 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x02>;
label = "versatile:1";
linux,default-trigger = "mmc0";
default-state = "off";
};
- led@08.2 {
+ led@8,2 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x04>;
label = "versatile:2";
linux,default-trigger = "cpu0";
default-state = "off";
};
- led@08.3 {
+ led@8,3 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x08>;
label = "versatile:3";
default-state = "off";
};
- led@08.4 {
+ led@8,4 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x10>;
label = "versatile:4";
default-state = "off";
};
- led@08.5 {
+ led@8,5 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x20>;
label = "versatile:5";
default-state = "off";
};
- led@08.6 {
+ led@8,6 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x40>;
label = "versatile:6";
default-state = "off";
};
- led@08.7 {
+ led@8,7 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x80>;
label = "versatile:7";
diff --git a/arch/arm/boot/dts/integrator.dtsi b/arch/arm/boot/dts/integrator.dtsi
index 602f74d2c758..ad868cfebc94 100644
--- a/arch/arm/boot/dts/integrator.dtsi
+++ b/arch/arm/boot/dts/integrator.dtsi
@@ -15,10 +15,14 @@ memory {
core-module@10000000 {
compatible = "arm,core-module-integrator", "syscon", "simple-mfd";
reg = <0x10000000 0x200>;
+ ranges = <0x0 0x10000000 0x200>;
+ #address-cells = <1>;
+ #size-cells = <1>;
/* Use core module LED to indicate CPU load */
- led@c.0 {
+ led@c,0 {
compatible = "register-bit-led";
+ reg = <0x0c 0x04>;
offset = <0x0c>;
mask = <0x01>;
label = "integrator:core_module";
@@ -104,35 +108,42 @@ kmi@19000000 {
interrupts = <4>;
};
- syscon {
+ syscon@1a000000 {
/* Debug registers mapped as syscon */
compatible = "syscon", "simple-mfd";
reg = <0x1a000000 0x10>;
+ ranges = <0x0 0x1a000000 0x10>;
+ #address-cells = <1>;
+ #size-cells = <1>;
- led@4.0 {
+ led@4,0 {
compatible = "register-bit-led";
+ reg = <0x04 0x04>;
offset = <0x04>;
mask = <0x01>;
label = "integrator:green0";
linux,default-trigger = "heartbeat";
default-state = "on";
};
- led@4.1 {
+ led@4,1 {
compatible = "register-bit-led";
+ reg = <0x04 0x04>;
offset = <0x04>;
mask = <0x02>;
label = "integrator:yellow";
default-state = "off";
};
- led@4.2 {
+ led@4,2 {
compatible = "register-bit-led";
+ reg = <0x04 0x04>;
offset = <0x04>;
mask = <0x04>;
label = "integrator:red";
default-state = "off";
};
- led@4.3 {
+ led@4,3 {
compatible = "register-bit-led";
+ reg = <0x04 0x04>;
offset = <0x04>;
mask = <0x08>;
label = "integrator:green1";
diff --git a/arch/arm/boot/dts/mps2.dtsi b/arch/arm/boot/dts/mps2.dtsi
index 37f5023f529c..b99577d411b1 100644
--- a/arch/arm/boot/dts/mps2.dtsi
+++ b/arch/arm/boot/dts/mps2.dtsi
@@ -216,8 +216,13 @@ fpgaio@8000 {
compatible = "syscon", "simple-mfd";
reg = <0x8000 0x10>;
- led0 {
+ ranges = <0x0 0x8000 0x10>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ led@0,0 {
compatible = "register-bit-led";
+ reg = <0x00 0x04>;
offset = <0x0>;
mask = <0x01>;
label = "userled:0";
@@ -225,8 +230,9 @@ led0 {
default-state = "on";
};
- led1 {
+ led@0,1 {
compatible = "register-bit-led";
+ reg = <0x00 0x04>;
offset = <0x0>;
mask = <0x02>;
label = "userled:1";
diff --git a/arch/arm/boot/dts/versatile-ab-ib2.dts b/arch/arm/boot/dts/versatile-ab-ib2.dts
index c577ff4bb4be..7ebb0dfd0467 100644
--- a/arch/arm/boot/dts/versatile-ab-ib2.dts
+++ b/arch/arm/boot/dts/versatile-ab-ib2.dts
@@ -13,9 +13,13 @@ / {
syscon@27000000 {
compatible = "arm,versatile-ib2-syscon", "syscon", "simple-mfd";
reg = <0x27000000 0x4>;
+ ranges = <0x0 0x27000000 0x4>;
+ #address-cells = <1>;
+ #size-cells = <1>;
- led@00.4 {
+ led@0,4 {
compatible = "register-bit-led";
+ reg = <0x00 0x04>;
offset = <0x00>;
mask = <0x10>;
label = "versatile-ib2:0";
diff --git a/arch/arm/boot/dts/versatile-ab.dts b/arch/arm/boot/dts/versatile-ab.dts
index 151c0220047d..79f7cc241282 100644
--- a/arch/arm/boot/dts/versatile-ab.dts
+++ b/arch/arm/boot/dts/versatile-ab.dts
@@ -70,61 +70,72 @@ vga_con_in: endpoint {
core-module@10000000 {
compatible = "arm,core-module-versatile", "syscon", "simple-mfd";
reg = <0x10000000 0x200>;
+ ranges = <0x0 0x10000000 0x200>;
+ #address-cells = <1>;
+ #size-cells = <1>;
- led@08.0 {
+ led@8,0 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x01>;
label = "versatile:0";
linux,default-trigger = "heartbeat";
default-state = "on";
};
- led@08.1 {
+ led@8,1 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x02>;
label = "versatile:1";
linux,default-trigger = "mmc0";
default-state = "off";
};
- led@08.2 {
+ led@8,2 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x04>;
label = "versatile:2";
linux,default-trigger = "cpu0";
default-state = "off";
};
- led@08.3 {
+ led@8,3 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x08>;
label = "versatile:3";
default-state = "off";
};
- led@08.4 {
+ led@8,4 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x10>;
label = "versatile:4";
default-state = "off";
};
- led@08.5 {
+ led@8,5 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x20>;
label = "versatile:5";
default-state = "off";
};
- led@08.6 {
+ led@8,6 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x40>;
label = "versatile:6";
default-state = "off";
};
- led@08.7 {
+ led@8,7 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x80>;
label = "versatile:7";
diff --git a/arch/arm64/boot/dts/arm/juno-motherboard.dtsi b/arch/arm64/boot/dts/arm/juno-motherboard.dtsi
index 40d95c58b55e..f7afb8faf5de 100644
--- a/arch/arm64/boot/dts/arm/juno-motherboard.dtsi
+++ b/arch/arm64/boot/dts/arm/juno-motherboard.dtsi
@@ -153,64 +153,75 @@ v2m_sysctl: sysctl@20000 {
apbregs@10000 {
compatible = "syscon", "simple-mfd";
reg = <0x010000 0x1000>;
+ ranges = <0x0 0x10000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
- led0 {
+ led@8,0 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x01>;
label = "vexpress:0";
linux,default-trigger = "heartbeat";
default-state = "on";
};
- led1 {
+ led@8,1 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x02>;
label = "vexpress:1";
linux,default-trigger = "mmc0";
default-state = "off";
};
- led2 {
+ led@8,2 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x04>;
label = "vexpress:2";
linux,default-trigger = "cpu0";
default-state = "off";
};
- led3 {
+ led@8,3 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x08>;
label = "vexpress:3";
linux,default-trigger = "cpu1";
default-state = "off";
};
- led4 {
+ led@8,4 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x10>;
label = "vexpress:4";
linux,default-trigger = "cpu2";
default-state = "off";
};
- led5 {
+ led@8,5 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x20>;
label = "vexpress:5";
linux,default-trigger = "cpu3";
default-state = "off";
};
- led6 {
+ led@8,6 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x40>;
label = "vexpress:6";
default-state = "off";
};
- led7 {
+ led@8,7 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x80>;
label = "vexpress:7";
--
2.31.1
WARNING: multiple messages have this Message-ID (diff)
From: Linus Walleij <linus.walleij@linaro.org>
To: arm@kernel.org, soc@kernel.org
Cc: linux-arm-kernel@lists.infradead.org,
Rob Herring <robh@kernel.org>,
Linus Walleij <linus.walleij@linaro.org>,
Liviu Dudau <liviu.dudau@arm.com>,
Sudeep Holla <sudeep.holla@arm.com>,
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Subject: [PATCH] ARM: dts: arm: Update register-bit-led nodes 'reg' and node names
Date: Mon, 25 Oct 2021 01:20:03 +0200 [thread overview]
Message-ID: <20211024232003.211484-1-linus.walleij@linaro.org> (raw)
Message-ID: <20211024232003.G9QD2t_xf6Vq0k5yLddtJkGMRWFC404l_8s9FzzPV6Y@z> (raw)
From: Rob Herring <robh@kernel.org>
Add a 'reg' entry for register-bit-led nodes on the Arm Ltd platforms.
The 'reg' entry is the LED control register address. With this, the node
name can be updated to use a generic node name, 'led', and a
unit-address.
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
SoC folks: please apply this directly for v5.16.
---
arch/arm/boot/dts/arm-realview-eb.dtsi | 27 +++++++++++++------
arch/arm/boot/dts/arm-realview-pb1176.dts | 27 +++++++++++++------
arch/arm/boot/dts/arm-realview-pb11mp.dts | 27 +++++++++++++------
arch/arm/boot/dts/arm-realview-pbx.dtsi | 27 +++++++++++++------
arch/arm/boot/dts/integrator.dtsi | 23 +++++++++++-----
arch/arm/boot/dts/mps2.dtsi | 10 +++++--
arch/arm/boot/dts/versatile-ab-ib2.dts | 6 ++++-
arch/arm/boot/dts/versatile-ab.dts | 27 +++++++++++++------
arch/arm64/boot/dts/arm/juno-motherboard.dtsi | 27 +++++++++++++------
9 files changed, 144 insertions(+), 57 deletions(-)
diff --git a/arch/arm/boot/dts/arm-realview-eb.dtsi b/arch/arm/boot/dts/arm-realview-eb.dtsi
index 04e8a27ba1eb..56441ef08a55 100644
--- a/arch/arm/boot/dts/arm-realview-eb.dtsi
+++ b/arch/arm/boot/dts/arm-realview-eb.dtsi
@@ -198,61 +198,72 @@ fpga {
syscon: syscon@10000000 {
compatible = "arm,realview-eb-syscon", "syscon", "simple-mfd";
reg = <0x10000000 0x1000>;
+ ranges = <0x0 0x10000000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
- led@08.0 {
+ led@8,0 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x01>;
label = "versatile:0";
linux,default-trigger = "heartbeat";
default-state = "on";
};
- led@08.1 {
+ led@8,1 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x02>;
label = "versatile:1";
linux,default-trigger = "mmc0";
default-state = "off";
};
- led@08.2 {
+ led@8,2 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x04>;
label = "versatile:2";
linux,default-trigger = "cpu0";
default-state = "off";
};
- led@08.3 {
+ led@8,3 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x08>;
label = "versatile:3";
default-state = "off";
};
- led@08.4 {
+ led@8,4 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x10>;
label = "versatile:4";
default-state = "off";
};
- led@08.5 {
+ led@8,5 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x20>;
label = "versatile:5";
default-state = "off";
};
- led@08.6 {
+ led@8,6 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x40>;
label = "versatile:6";
default-state = "off";
};
- led@08.7 {
+ led@8,7 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x80>;
label = "versatile:7";
diff --git a/arch/arm/boot/dts/arm-realview-pb1176.dts b/arch/arm/boot/dts/arm-realview-pb1176.dts
index 366687fb1ee3..df71ee27294d 100644
--- a/arch/arm/boot/dts/arm-realview-pb1176.dts
+++ b/arch/arm/boot/dts/arm-realview-pb1176.dts
@@ -216,61 +216,72 @@ soc {
syscon: syscon@10000000 {
compatible = "arm,realview-pb1176-syscon", "syscon", "simple-mfd";
reg = <0x10000000 0x1000>;
+ ranges = <0x0 0x10000000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
- led@08.0 {
+ led@8,0 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x01>;
label = "versatile:0";
linux,default-trigger = "heartbeat";
default-state = "on";
};
- led@08.1 {
+ led@8,1 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x02>;
label = "versatile:1";
linux,default-trigger = "mmc0";
default-state = "off";
};
- led@08.2 {
+ led@8,2 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x04>;
label = "versatile:2";
linux,default-trigger = "cpu0";
default-state = "off";
};
- led@08.3 {
+ led@8,3 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x08>;
label = "versatile:3";
default-state = "off";
};
- led@08.4 {
+ led@8,4 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x10>;
label = "versatile:4";
default-state = "off";
};
- led@08.5 {
+ led@8,5 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x20>;
label = "versatile:5";
default-state = "off";
};
- led@08.6 {
+ led@8,6 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x40>;
label = "versatile:6";
default-state = "off";
};
- led@08.7 {
+ led@8,7 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x80>;
label = "versatile:7";
diff --git a/arch/arm/boot/dts/arm-realview-pb11mp.dts b/arch/arm/boot/dts/arm-realview-pb11mp.dts
index 228a51a38f95..54d4cbd10bdf 100644
--- a/arch/arm/boot/dts/arm-realview-pb11mp.dts
+++ b/arch/arm/boot/dts/arm-realview-pb11mp.dts
@@ -303,64 +303,75 @@ soc {
pb11mp_syscon: syscon@10000000 {
compatible = "arm,realview-pb11mp-syscon", "syscon", "simple-mfd";
reg = <0x10000000 0x1000>;
+ ranges = <0x0 0x10000000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
- led@08.0 {
+ led@8,0 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x01>;
label = "versatile:0";
linux,default-trigger = "heartbeat";
default-state = "on";
};
- led@08.1 {
+ led@8,1 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x02>;
label = "versatile:1";
linux,default-trigger = "mmc0";
default-state = "off";
};
- led@08.2 {
+ led@8,2 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x04>;
label = "versatile:2";
linux,default-trigger = "cpu0";
default-state = "off";
};
- led@08.3 {
+ led@8,3 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x08>;
label = "versatile:3";
linux,default-trigger = "cpu1";
default-state = "off";
};
- led@08.4 {
+ led@8,4 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x10>;
label = "versatile:4";
linux,default-trigger = "cpu2";
default-state = "off";
};
- led@08.5 {
+ led@8,5 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x20>;
label = "versatile:5";
linux,default-trigger = "cpu3";
default-state = "off";
};
- led@08.6 {
+ led@8,6 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x40>;
label = "versatile:6";
default-state = "off";
};
- led@08.7 {
+ led@8,7 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x80>;
label = "versatile:7";
diff --git a/arch/arm/boot/dts/arm-realview-pbx.dtsi b/arch/arm/boot/dts/arm-realview-pbx.dtsi
index ccf6f756b6ed..9366fecc699b 100644
--- a/arch/arm/boot/dts/arm-realview-pbx.dtsi
+++ b/arch/arm/boot/dts/arm-realview-pbx.dtsi
@@ -220,61 +220,72 @@ soc: soc {
syscon: syscon@10000000 {
compatible = "arm,realview-pbx-syscon", "syscon", "simple-mfd";
reg = <0x10000000 0x1000>;
+ ranges = <0x0 0x10000000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
- led@08.0 {
+ led@8,0 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x01>;
label = "versatile:0";
linux,default-trigger = "heartbeat";
default-state = "on";
};
- led@08.1 {
+ led@8,1 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x02>;
label = "versatile:1";
linux,default-trigger = "mmc0";
default-state = "off";
};
- led@08.2 {
+ led@8,2 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x04>;
label = "versatile:2";
linux,default-trigger = "cpu0";
default-state = "off";
};
- led@08.3 {
+ led@8,3 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x08>;
label = "versatile:3";
default-state = "off";
};
- led@08.4 {
+ led@8,4 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x10>;
label = "versatile:4";
default-state = "off";
};
- led@08.5 {
+ led@8,5 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x20>;
label = "versatile:5";
default-state = "off";
};
- led@08.6 {
+ led@8,6 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x40>;
label = "versatile:6";
default-state = "off";
};
- led@08.7 {
+ led@8,7 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x80>;
label = "versatile:7";
diff --git a/arch/arm/boot/dts/integrator.dtsi b/arch/arm/boot/dts/integrator.dtsi
index 602f74d2c758..ad868cfebc94 100644
--- a/arch/arm/boot/dts/integrator.dtsi
+++ b/arch/arm/boot/dts/integrator.dtsi
@@ -15,10 +15,14 @@ memory {
core-module@10000000 {
compatible = "arm,core-module-integrator", "syscon", "simple-mfd";
reg = <0x10000000 0x200>;
+ ranges = <0x0 0x10000000 0x200>;
+ #address-cells = <1>;
+ #size-cells = <1>;
/* Use core module LED to indicate CPU load */
- led@c.0 {
+ led@c,0 {
compatible = "register-bit-led";
+ reg = <0x0c 0x04>;
offset = <0x0c>;
mask = <0x01>;
label = "integrator:core_module";
@@ -104,35 +108,42 @@ kmi@19000000 {
interrupts = <4>;
};
- syscon {
+ syscon@1a000000 {
/* Debug registers mapped as syscon */
compatible = "syscon", "simple-mfd";
reg = <0x1a000000 0x10>;
+ ranges = <0x0 0x1a000000 0x10>;
+ #address-cells = <1>;
+ #size-cells = <1>;
- led@4.0 {
+ led@4,0 {
compatible = "register-bit-led";
+ reg = <0x04 0x04>;
offset = <0x04>;
mask = <0x01>;
label = "integrator:green0";
linux,default-trigger = "heartbeat";
default-state = "on";
};
- led@4.1 {
+ led@4,1 {
compatible = "register-bit-led";
+ reg = <0x04 0x04>;
offset = <0x04>;
mask = <0x02>;
label = "integrator:yellow";
default-state = "off";
};
- led@4.2 {
+ led@4,2 {
compatible = "register-bit-led";
+ reg = <0x04 0x04>;
offset = <0x04>;
mask = <0x04>;
label = "integrator:red";
default-state = "off";
};
- led@4.3 {
+ led@4,3 {
compatible = "register-bit-led";
+ reg = <0x04 0x04>;
offset = <0x04>;
mask = <0x08>;
label = "integrator:green1";
diff --git a/arch/arm/boot/dts/mps2.dtsi b/arch/arm/boot/dts/mps2.dtsi
index 37f5023f529c..b99577d411b1 100644
--- a/arch/arm/boot/dts/mps2.dtsi
+++ b/arch/arm/boot/dts/mps2.dtsi
@@ -216,8 +216,13 @@ fpgaio@8000 {
compatible = "syscon", "simple-mfd";
reg = <0x8000 0x10>;
- led0 {
+ ranges = <0x0 0x8000 0x10>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ led@0,0 {
compatible = "register-bit-led";
+ reg = <0x00 0x04>;
offset = <0x0>;
mask = <0x01>;
label = "userled:0";
@@ -225,8 +230,9 @@ led0 {
default-state = "on";
};
- led1 {
+ led@0,1 {
compatible = "register-bit-led";
+ reg = <0x00 0x04>;
offset = <0x0>;
mask = <0x02>;
label = "userled:1";
diff --git a/arch/arm/boot/dts/versatile-ab-ib2.dts b/arch/arm/boot/dts/versatile-ab-ib2.dts
index c577ff4bb4be..7ebb0dfd0467 100644
--- a/arch/arm/boot/dts/versatile-ab-ib2.dts
+++ b/arch/arm/boot/dts/versatile-ab-ib2.dts
@@ -13,9 +13,13 @@ / {
syscon@27000000 {
compatible = "arm,versatile-ib2-syscon", "syscon", "simple-mfd";
reg = <0x27000000 0x4>;
+ ranges = <0x0 0x27000000 0x4>;
+ #address-cells = <1>;
+ #size-cells = <1>;
- led@00.4 {
+ led@0,4 {
compatible = "register-bit-led";
+ reg = <0x00 0x04>;
offset = <0x00>;
mask = <0x10>;
label = "versatile-ib2:0";
diff --git a/arch/arm/boot/dts/versatile-ab.dts b/arch/arm/boot/dts/versatile-ab.dts
index 151c0220047d..79f7cc241282 100644
--- a/arch/arm/boot/dts/versatile-ab.dts
+++ b/arch/arm/boot/dts/versatile-ab.dts
@@ -70,61 +70,72 @@ vga_con_in: endpoint {
core-module@10000000 {
compatible = "arm,core-module-versatile", "syscon", "simple-mfd";
reg = <0x10000000 0x200>;
+ ranges = <0x0 0x10000000 0x200>;
+ #address-cells = <1>;
+ #size-cells = <1>;
- led@08.0 {
+ led@8,0 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x01>;
label = "versatile:0";
linux,default-trigger = "heartbeat";
default-state = "on";
};
- led@08.1 {
+ led@8,1 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x02>;
label = "versatile:1";
linux,default-trigger = "mmc0";
default-state = "off";
};
- led@08.2 {
+ led@8,2 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x04>;
label = "versatile:2";
linux,default-trigger = "cpu0";
default-state = "off";
};
- led@08.3 {
+ led@8,3 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x08>;
label = "versatile:3";
default-state = "off";
};
- led@08.4 {
+ led@8,4 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x10>;
label = "versatile:4";
default-state = "off";
};
- led@08.5 {
+ led@8,5 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x20>;
label = "versatile:5";
default-state = "off";
};
- led@08.6 {
+ led@8,6 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x40>;
label = "versatile:6";
default-state = "off";
};
- led@08.7 {
+ led@8,7 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x80>;
label = "versatile:7";
diff --git a/arch/arm64/boot/dts/arm/juno-motherboard.dtsi b/arch/arm64/boot/dts/arm/juno-motherboard.dtsi
index 40d95c58b55e..f7afb8faf5de 100644
--- a/arch/arm64/boot/dts/arm/juno-motherboard.dtsi
+++ b/arch/arm64/boot/dts/arm/juno-motherboard.dtsi
@@ -153,64 +153,75 @@ v2m_sysctl: sysctl@20000 {
apbregs@10000 {
compatible = "syscon", "simple-mfd";
reg = <0x010000 0x1000>;
+ ranges = <0x0 0x10000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
- led0 {
+ led@8,0 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x01>;
label = "vexpress:0";
linux,default-trigger = "heartbeat";
default-state = "on";
};
- led1 {
+ led@8,1 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x02>;
label = "vexpress:1";
linux,default-trigger = "mmc0";
default-state = "off";
};
- led2 {
+ led@8,2 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x04>;
label = "vexpress:2";
linux,default-trigger = "cpu0";
default-state = "off";
};
- led3 {
+ led@8,3 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x08>;
label = "vexpress:3";
linux,default-trigger = "cpu1";
default-state = "off";
};
- led4 {
+ led@8,4 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x10>;
label = "vexpress:4";
linux,default-trigger = "cpu2";
default-state = "off";
};
- led5 {
+ led@8,5 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x20>;
label = "vexpress:5";
linux,default-trigger = "cpu3";
default-state = "off";
};
- led6 {
+ led@8,6 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x40>;
label = "vexpress:6";
default-state = "off";
};
- led7 {
+ led@8,7 {
compatible = "register-bit-led";
+ reg = <0x08 0x04>;
offset = <0x08>;
mask = <0x80>;
label = "vexpress:7";
--
2.31.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2021-10-24 23:22 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-10-24 23:20 Linus Walleij [this message]
2021-10-24 23:20 ` [PATCH] ARM: dts: arm: Update register-bit-led nodes 'reg' and node names Linus Walleij
2021-10-26 16:30 ` patchwork-bot+linux-soc
2021-11-05 18:39 ` Guenter Roeck
2021-11-05 18:39 ` Guenter Roeck
2021-11-09 0:25 ` Rob Herring
2021-11-09 0:25 ` Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211024232003.211484-1-linus.walleij@linaro.org \
--to=linus.walleij@linaro.org \
--cc=arm@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=liviu.dudau@arm.com \
--cc=lorenzo.pieralisi@arm.com \
--cc=robh@kernel.org \
--cc=soc@kernel.org \
--cc=sudeep.holla@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.