All of lore.kernel.org
 help / color / mirror / Atom feed
From: Johan Hovold <johan@kernel.org>
To: Ian Abbott <abbotti@mev.co.uk>,
	H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org,
	Johan Hovold <johan@kernel.org>,
	stable@vger.kernel.org
Subject: [PATCH 5/5] comedi: vmk80xx: fix bulk and interrupt message timeouts
Date: Mon, 25 Oct 2021 13:45:32 +0200	[thread overview]
Message-ID: <20211025114532.4599-6-johan@kernel.org> (raw)
In-Reply-To: <20211025114532.4599-1-johan@kernel.org>

USB bulk and interrupt message timeouts are specified in milliseconds
and should specifically not vary with CONFIG_HZ.

Note that the bulk-out transfer timeout was set to the endpoint
bInterval value, which should be ignored for bulk endpoints and is
typically set to zero. This meant that a failing bulk-out transfer
would never time out.

Assume that the 10 second timeout used for all other transfers is more
than enough also for the bulk-out endpoint.

Fixes: 985cafccbf9b ("Staging: Comedi: vmk80xx: Add k8061 support")
Fixes: 951348b37738 ("staging: comedi: vmk80xx: wait for URBs to complete")
Cc: stable@vger.kernel.org      # 2.6.31
Signed-off-by: Johan Hovold <johan@kernel.org>
---
 drivers/comedi/drivers/vmk80xx.c | 12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

diff --git a/drivers/comedi/drivers/vmk80xx.c b/drivers/comedi/drivers/vmk80xx.c
index 9c56918e3b76..4b00a9ea611a 100644
--- a/drivers/comedi/drivers/vmk80xx.c
+++ b/drivers/comedi/drivers/vmk80xx.c
@@ -91,6 +91,7 @@ enum {
 #define IC6_VERSION		BIT(1)
 
 #define MIN_BUF_SIZE		64
+#define PACKET_TIMEOUT		10000	/* ms */
 
 enum vmk80xx_model {
 	VMK8055_MODEL,
@@ -169,10 +170,11 @@ static void vmk80xx_do_bulk_msg(struct comedi_device *dev)
 	tx_size = usb_endpoint_maxp(devpriv->ep_tx);
 	rx_size = usb_endpoint_maxp(devpriv->ep_rx);
 
-	usb_bulk_msg(usb, tx_pipe, devpriv->usb_tx_buf,
-		     tx_size, NULL, devpriv->ep_tx->bInterval);
+	usb_bulk_msg(usb, tx_pipe, devpriv->usb_tx_buf, tx_size, NULL,
+		     PACKET_TIMEOUT);
 
-	usb_bulk_msg(usb, rx_pipe, devpriv->usb_rx_buf, rx_size, NULL, HZ * 10);
+	usb_bulk_msg(usb, rx_pipe, devpriv->usb_rx_buf, rx_size, NULL,
+		     PACKET_TIMEOUT);
 }
 
 static int vmk80xx_read_packet(struct comedi_device *dev)
@@ -191,7 +193,7 @@ static int vmk80xx_read_packet(struct comedi_device *dev)
 	pipe = usb_rcvintpipe(usb, ep->bEndpointAddress);
 	return usb_interrupt_msg(usb, pipe, devpriv->usb_rx_buf,
 				 usb_endpoint_maxp(ep), NULL,
-				 HZ * 10);
+				 PACKET_TIMEOUT);
 }
 
 static int vmk80xx_write_packet(struct comedi_device *dev, int cmd)
@@ -212,7 +214,7 @@ static int vmk80xx_write_packet(struct comedi_device *dev, int cmd)
 	pipe = usb_sndintpipe(usb, ep->bEndpointAddress);
 	return usb_interrupt_msg(usb, pipe, devpriv->usb_tx_buf,
 				 usb_endpoint_maxp(ep), NULL,
-				 HZ * 10);
+				 PACKET_TIMEOUT);
 }
 
 static int vmk80xx_reset_device(struct comedi_device *dev)
-- 
2.32.0


  parent reply	other threads:[~2021-10-25 11:46 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-10-25 11:45 [PATCH 0/5] comedi: misc fixes Johan Hovold
2021-10-25 11:45 ` [PATCH 1/5] comedi: ni_usb6501: fix NULL-deref in command paths Johan Hovold
2021-10-26 14:12   ` Ian Abbott
2021-10-27  8:54     ` Johan Hovold
2021-10-25 11:45 ` [PATCH 2/5] comedi: dt9812: fix DMA buffers on stack Johan Hovold
2021-10-26 14:27   ` Ian Abbott
2021-10-27  9:05     ` Johan Hovold
2021-10-25 11:45 ` [PATCH 3/5] comedi: vmk80xx: fix transfer-buffer overflows Johan Hovold
2021-10-26 14:32   ` Ian Abbott
2021-10-25 11:45 ` [PATCH 4/5] comedi: vmk80xx: fix bulk-buffer overflow Johan Hovold
2021-10-26 14:34   ` Ian Abbott
2021-10-25 11:45 ` Johan Hovold [this message]
2021-10-26 14:35   ` [PATCH 5/5] comedi: vmk80xx: fix bulk and interrupt message timeouts Ian Abbott

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20211025114532.4599-6-johan@kernel.org \
    --to=johan@kernel.org \
    --cc=abbotti@mev.co.uk \
    --cc=gregkh@linuxfoundation.org \
    --cc=hsweeten@visionengravers.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.