From: Wen Gong <quic_wgong@quicinc.com>
To: <ath10k@lists.infradead.org>
Cc: <linux-wireless@vger.kernel.org>, <quic_wgong@quicinc.com>
Subject: [PATCH] ath10k: fix scan abort when duration is set for hw scan
Date: Mon, 25 Oct 2021 22:59:02 -0400 [thread overview]
Message-ID: <20211026025902.26621-1-quic_wgong@quicinc.com> (raw)
When request scan with duration 120ms on channel 1, it failed with
scan abort easily. Because scan_timeout is set to 130ms for the scan
in ath10k_hw_scan(), and timed out before scan complete, so lead
scan abort.
failed log of ath10k:
2021-04-14T14:43:29.936058Z DEBUG kernel: [67384.594846] ath10k_sdio mmc1:0001:1: wmi tlv start scan
2021-04-14T14:43:29.937896Z DEBUG kernel: [67384.595820] ath10k_sdio mmc1:0001:1: scan event started type 1 reason 7 freq 2437 req_id 40961 scan_id 40960 vdev_id 0 state starting (1)
2021-04-14T14:43:29.938357Z DEBUG kernel: [67384.596761] ath10k_sdio mmc1:0001:1: scan event bss channel type 4 reason 7 freq 2437 req_id 40961 scan_id 40960 vdev_id 0 state running (2)
2021-04-14T14:43:29.992497Z DEBUG kernel: [67384.651013] ath10k_sdio mmc1:0001:1: scan event foreign channel type 8 reason 7 freq 2412 req_id 40961 scan_id 40960 vdev_id 0 state running (2)
2021-04-14T14:43:30.063530Z DEBUG kernel: [67384.722139] ath10k_sdio mmc1:0001:1: wmi tlv stop scan
2021-04-14T14:43:30.066592Z DEBUG kernel: [67384.724403] ath10k_sdio mmc1:0001:1: scan event completed [cancelled] type 2 reason 1 freq 2412 req_id 40961 scan_id 40960 vdev_id 0 state aborting (3)
failed log of wpa_supplicant:
2021-04-14T14:43:29.981842Z DEBUG wpa_supplicant[887]: wlan0: nl80211: scan request
2021-04-14T14:43:29.981988Z DEBUG wpa_supplicant[887]: nl80211: Passive scan requested
2021-04-14T14:43:29.982202Z DEBUG wpa_supplicant[887]: nl80211: Add NL80211_SCAN_FLAG_FLUSH
2021-04-14T14:43:29.982339Z DEBUG wpa_supplicant[887]: Scan requested (ret=0) - scan timeout 30 seconds
2021-04-14T14:43:29.982491Z DEBUG wpa_supplicant[887]: nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlan0
2021-04-14T14:43:29.982629Z DEBUG wpa_supplicant[887]: wlan0: nl80211: Scan trigger
2021-04-14T14:43:29.982779Z DEBUG wpa_supplicant[887]: wlan0: Event SCAN_STARTED (47) received
2021-04-14T14:43:29.982920Z DEBUG wpa_supplicant[887]: wlan0: Own scan request started a scan in 0.000175 seconds
2021-04-14T14:43:30.082401Z DEBUG wpa_supplicant[887]: nl80211: Drv Event 35 (NL80211_CMD_SCAN_ABORTED) received for wlan0
2021-04-14T14:43:30.082704Z DEBUG wpa_supplicant[887]: wlan0: nl80211: Scan aborted
2021-04-14T14:43:30.082905Z DEBUG wpa_supplicant[887]: nl80211: Scan included frequencies: 2412
2021-04-14T14:43:30.083123Z DEBUG wpa_supplicant[887]: wlan0: Event SCAN_RESULTS (3) received
2021-04-14T14:43:30.083310Z DEBUG wpa_supplicant[887]: wlan0: Scan completed in 0.128655 seconds
This is to increase the scan_timeout with 200ms for this situation,
then scan will not timed out for this situation.
Tested-on: QCA6174 hw3.2 SDIO WLAN.RMH.4.4.1-00049
Signed-off-by: Wen Gong <quic_wgong@quicinc.com>
---
drivers/net/wireless/ath/ath10k/mac.c | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index bb6c5ee43ac0..a4bd6b9dcf6f 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -6354,13 +6354,14 @@ static int ath10k_hw_scan(struct ieee80211_hw *hw,
scan_timeout = min_t(u32, arg.max_rest_time *
(arg.n_channels - 1) + (req->duration +
ATH10K_SCAN_CHANNEL_SWITCH_WMI_EVT_OVERHEAD) *
- arg.n_channels, arg.max_scan_time + 200);
-
+ arg.n_channels, arg.max_scan_time);
} else {
- /* Add a 200ms margin to account for event/command processing */
- scan_timeout = arg.max_scan_time + 200;
+ scan_timeout = arg.max_scan_time;
}
+ /* Add a 200ms margin to account for event/command processing */
+ scan_timeout += 200;
+
ret = ath10k_start_scan(ar, &arg);
if (ret) {
ath10k_warn(ar, "failed to start hw scan: %d\n", ret);
--
2.31.1
WARNING: multiple messages have this Message-ID (diff)
From: Wen Gong <quic_wgong@quicinc.com>
To: <ath10k@lists.infradead.org>
Cc: <linux-wireless@vger.kernel.org>, <quic_wgong@quicinc.com>
Subject: [PATCH] ath10k: fix scan abort when duration is set for hw scan
Date: Mon, 25 Oct 2021 22:59:02 -0400 [thread overview]
Message-ID: <20211026025902.26621-1-quic_wgong@quicinc.com> (raw)
When request scan with duration 120ms on channel 1, it failed with
scan abort easily. Because scan_timeout is set to 130ms for the scan
in ath10k_hw_scan(), and timed out before scan complete, so lead
scan abort.
failed log of ath10k:
2021-04-14T14:43:29.936058Z DEBUG kernel: [67384.594846] ath10k_sdio mmc1:0001:1: wmi tlv start scan
2021-04-14T14:43:29.937896Z DEBUG kernel: [67384.595820] ath10k_sdio mmc1:0001:1: scan event started type 1 reason 7 freq 2437 req_id 40961 scan_id 40960 vdev_id 0 state starting (1)
2021-04-14T14:43:29.938357Z DEBUG kernel: [67384.596761] ath10k_sdio mmc1:0001:1: scan event bss channel type 4 reason 7 freq 2437 req_id 40961 scan_id 40960 vdev_id 0 state running (2)
2021-04-14T14:43:29.992497Z DEBUG kernel: [67384.651013] ath10k_sdio mmc1:0001:1: scan event foreign channel type 8 reason 7 freq 2412 req_id 40961 scan_id 40960 vdev_id 0 state running (2)
2021-04-14T14:43:30.063530Z DEBUG kernel: [67384.722139] ath10k_sdio mmc1:0001:1: wmi tlv stop scan
2021-04-14T14:43:30.066592Z DEBUG kernel: [67384.724403] ath10k_sdio mmc1:0001:1: scan event completed [cancelled] type 2 reason 1 freq 2412 req_id 40961 scan_id 40960 vdev_id 0 state aborting (3)
failed log of wpa_supplicant:
2021-04-14T14:43:29.981842Z DEBUG wpa_supplicant[887]: wlan0: nl80211: scan request
2021-04-14T14:43:29.981988Z DEBUG wpa_supplicant[887]: nl80211: Passive scan requested
2021-04-14T14:43:29.982202Z DEBUG wpa_supplicant[887]: nl80211: Add NL80211_SCAN_FLAG_FLUSH
2021-04-14T14:43:29.982339Z DEBUG wpa_supplicant[887]: Scan requested (ret=0) - scan timeout 30 seconds
2021-04-14T14:43:29.982491Z DEBUG wpa_supplicant[887]: nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlan0
2021-04-14T14:43:29.982629Z DEBUG wpa_supplicant[887]: wlan0: nl80211: Scan trigger
2021-04-14T14:43:29.982779Z DEBUG wpa_supplicant[887]: wlan0: Event SCAN_STARTED (47) received
2021-04-14T14:43:29.982920Z DEBUG wpa_supplicant[887]: wlan0: Own scan request started a scan in 0.000175 seconds
2021-04-14T14:43:30.082401Z DEBUG wpa_supplicant[887]: nl80211: Drv Event 35 (NL80211_CMD_SCAN_ABORTED) received for wlan0
2021-04-14T14:43:30.082704Z DEBUG wpa_supplicant[887]: wlan0: nl80211: Scan aborted
2021-04-14T14:43:30.082905Z DEBUG wpa_supplicant[887]: nl80211: Scan included frequencies: 2412
2021-04-14T14:43:30.083123Z DEBUG wpa_supplicant[887]: wlan0: Event SCAN_RESULTS (3) received
2021-04-14T14:43:30.083310Z DEBUG wpa_supplicant[887]: wlan0: Scan completed in 0.128655 seconds
This is to increase the scan_timeout with 200ms for this situation,
then scan will not timed out for this situation.
Tested-on: QCA6174 hw3.2 SDIO WLAN.RMH.4.4.1-00049
Signed-off-by: Wen Gong <quic_wgong@quicinc.com>
---
drivers/net/wireless/ath/ath10k/mac.c | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index bb6c5ee43ac0..a4bd6b9dcf6f 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -6354,13 +6354,14 @@ static int ath10k_hw_scan(struct ieee80211_hw *hw,
scan_timeout = min_t(u32, arg.max_rest_time *
(arg.n_channels - 1) + (req->duration +
ATH10K_SCAN_CHANNEL_SWITCH_WMI_EVT_OVERHEAD) *
- arg.n_channels, arg.max_scan_time + 200);
-
+ arg.n_channels, arg.max_scan_time);
} else {
- /* Add a 200ms margin to account for event/command processing */
- scan_timeout = arg.max_scan_time + 200;
+ scan_timeout = arg.max_scan_time;
}
+ /* Add a 200ms margin to account for event/command processing */
+ scan_timeout += 200;
+
ret = ath10k_start_scan(ar, &arg);
if (ret) {
ath10k_warn(ar, "failed to start hw scan: %d\n", ret);
--
2.31.1
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
next reply other threads:[~2021-10-26 2:59 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-10-26 2:59 Wen Gong [this message]
2021-10-26 2:59 ` [PATCH] ath10k: fix scan abort when duration is set for hw scan Wen Gong
2021-12-08 8:38 ` Kalle Valo
2021-12-08 8:38 ` Kalle Valo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211026025902.26621-1-quic_wgong@quicinc.com \
--to=quic_wgong@quicinc.com \
--cc=ath10k@lists.infradead.org \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.