All of lore.kernel.org
 help / color / mirror / Atom feed
From: Baochen Qiang <bqiang@codeaurora.org>
To: ath11k@lists.infradead.org
Cc: linux-wireless@vger.kernel.org
Subject: [PATCH 3/7] ath11k: use ATH11K_PCI_IRQ_DP_OFFSET for DP IRQ
Date: Tue, 26 Oct 2021 12:16:55 +0800	[thread overview]
Message-ID: <20211026041655.5112-1-bqiang@codeaurora.org> (raw)

From: Carl Huang <cjhuang@codeaurora.org>

Like ATH11K_PCI_IRQ_CE0_OFFSET, define ATH11K_PCI_IRQ_DP_OFFSET for
DP to save the IRQ instead of base_vector from MSI config.

Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1

Signed-off-by: Carl Huang <cjhuang@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Baochen Qiang <bqiang@codeaurora.org>
---
 drivers/net/wireless/ath/ath11k/pci.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/ath/ath11k/pci.c b/drivers/net/wireless/ath/ath11k/pci.c
index bf8d34bc5afa..ed610e56c160 100644
--- a/drivers/net/wireless/ath/ath11k/pci.c
+++ b/drivers/net/wireless/ath/ath11k/pci.c
@@ -16,7 +16,8 @@
 #define ATH11K_PCI_BAR_NUM		0
 #define ATH11K_PCI_DMA_MASK		32
 
-#define ATH11K_PCI_IRQ_CE0_OFFSET		3
+#define ATH11K_PCI_IRQ_CE0_OFFSET	3
+#define ATH11K_PCI_IRQ_DP_OFFSET	14
 
 #define WINDOW_ENABLE_BIT		0x40000000
 #define WINDOW_REG_ADDRESS		0x310c
@@ -764,7 +765,7 @@ static int ath11k_pci_ext_irq_config(struct ath11k_base *ab)
 		}
 
 		irq_grp->num_irq = num_irq;
-		irq_grp->irqs[0] = base_idx + i;
+		irq_grp->irqs[0] = ATH11K_PCI_IRQ_DP_OFFSET + i;
 
 		for (j = 0; j < irq_grp->num_irq; j++) {
 			int irq_idx = irq_grp->irqs[j];
-- 
2.25.1


WARNING: multiple messages have this Message-ID (diff)
From: Baochen Qiang <bqiang@codeaurora.org>
To: ath11k@lists.infradead.org
Cc: linux-wireless@vger.kernel.org
Subject: [PATCH 3/7] ath11k: use ATH11K_PCI_IRQ_DP_OFFSET for DP IRQ
Date: Tue, 26 Oct 2021 12:16:55 +0800	[thread overview]
Message-ID: <20211026041655.5112-1-bqiang@codeaurora.org> (raw)

From: Carl Huang <cjhuang@codeaurora.org>

Like ATH11K_PCI_IRQ_CE0_OFFSET, define ATH11K_PCI_IRQ_DP_OFFSET for
DP to save the IRQ instead of base_vector from MSI config.

Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1

Signed-off-by: Carl Huang <cjhuang@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Baochen Qiang <bqiang@codeaurora.org>
---
 drivers/net/wireless/ath/ath11k/pci.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/ath/ath11k/pci.c b/drivers/net/wireless/ath/ath11k/pci.c
index bf8d34bc5afa..ed610e56c160 100644
--- a/drivers/net/wireless/ath/ath11k/pci.c
+++ b/drivers/net/wireless/ath/ath11k/pci.c
@@ -16,7 +16,8 @@
 #define ATH11K_PCI_BAR_NUM		0
 #define ATH11K_PCI_DMA_MASK		32
 
-#define ATH11K_PCI_IRQ_CE0_OFFSET		3
+#define ATH11K_PCI_IRQ_CE0_OFFSET	3
+#define ATH11K_PCI_IRQ_DP_OFFSET	14
 
 #define WINDOW_ENABLE_BIT		0x40000000
 #define WINDOW_REG_ADDRESS		0x310c
@@ -764,7 +765,7 @@ static int ath11k_pci_ext_irq_config(struct ath11k_base *ab)
 		}
 
 		irq_grp->num_irq = num_irq;
-		irq_grp->irqs[0] = base_idx + i;
+		irq_grp->irqs[0] = ATH11K_PCI_IRQ_DP_OFFSET + i;
 
 		for (j = 0; j < irq_grp->num_irq; j++) {
 			int irq_idx = irq_grp->irqs[j];
-- 
2.25.1


-- 
ath11k mailing list
ath11k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath11k

             reply	other threads:[~2021-10-26  4:17 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-10-26  4:16 Baochen Qiang [this message]
2021-10-26  4:16 ` [PATCH 3/7] ath11k: use ATH11K_PCI_IRQ_DP_OFFSET for DP IRQ Baochen Qiang
2021-11-15 10:31 ` Kalle Valo
2021-11-15 10:31   ` Kalle Valo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20211026041655.5112-1-bqiang@codeaurora.org \
    --to=bqiang@codeaurora.org \
    --cc=ath11k@lists.infradead.org \
    --cc=linux-wireless@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.